Can i force carb my sankes and then store them at serving temp - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Can i force carb my sankes and then store them at serving temp
Cool Brewing Corny 5G & Mini Giveaway

Thread Tools
Old 08-06-2012, 03:36 AM   #1
Join Date: May 2012
Location: Headland, Alabama
Posts: 251
Liked 16 Times on 14 Posts
Likes Given: 1

I have a large kegerator but it only has two taps. I have 3 sanke 1/6 bbls and one 1/4 bbl. can i force carb them and then disconnect the coupler to force carb another keg without ill effects? If so are there any special steps i should take or just getit carbed the. Pull the releif valve disconnect and put it on a different keg?

Reply With Quote
Old 08-06-2012, 03:44 AM   #2
BIAB Expert Tailor
wilserbrewer's Avatar
Join Date: May 2007
Location: Jersey Shore, Jersey
Posts: 9,168
Liked 1224 Times on 941 Posts
Likes Given: 16

Yes you could force carb a zillion kegs and set them aside for future use in sweet home alabama...just pm me when you tap em...might be worthwhile to purge or vent them prior to force carbing...

Reply With Quote

Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Do most people force carb or set it to serving PSI and let it carb normally? scottvin Bottling/Kegging 25 06-08-2012 04:00 AM
Force carb at serving pressure mciaio Bottling/Kegging 21 02-24-2012 05:43 PM
Force carb. Room temp azimmer1 Bottling/Kegging 5 07-12-2011 07:26 PM
Force Carb Temp abraxas Bottling/Kegging 32 02-23-2008 01:40 AM
Force Carb and Serving pressure question. cpbergie Bottling/Kegging 7 07-02-2007 04:15 AM

Forum Jump