25 or 50 foot CFC? - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Chillers & Stir Plates > 25 or 50 foot CFC?

Reply
 
Thread Tools
Old 07-30-2012, 12:46 PM   #1
Chia
Recipes 
 
Jun 2011
Cape Girardeau, MO
Posts: 315
Liked 77 Times on 16 Posts



Water temps have always been a huge problem here in the summer. my ic is just not cutting it anymore. I have a gift certificate for a big box hardware store and thought i would make a CFC and use my IC as a pre-chiller. i hate to spend the $$ and not get the job done, so i was thinking 50 foot would be good, even if it is overkill. any thoughts or advice on building a CFC? Thanks!
__________________
Whitener Street Brewing Co.

 
Reply With Quote
Old 07-30-2012, 12:53 PM   #2
stratslinger
HBT_SUPPORTER.png
 
stratslinger's Avatar
Recipes 
 
Dec 2010
Terryville, CT
Posts: 2,472
Liked 209 Times on 174 Posts


If you've already got a pre-chiller in the mix, there's really no reason that a 25 foot IC shouldn't do the trick - especially if you put a ball valve on it's outflow side so you can throttle it down a little bit if you need to, just to increase the contact time inside the CFC. My CFC is 25', and depending on the time of year, I sometimes have to throttle the garden hose input so I don't overchill the wort!

 
Reply With Quote
Old 08-09-2012, 07:52 PM   #3
Guitarboarder
 
Guitarboarder's Avatar
Recipes 
 
Jun 2011
Tualatin, Oregon
Posts: 16


so I made a 50 ish footer because I had the stuff so figures why not. and let me tell ya I can have my cooling water at a trickle and still be chilling perfectly. I will say though that with just gravity it is way slow! Im sure I'm reaching my equilibrium around half way or so with gravity at least but a pump is my next purchase so I figure that I will be able to pump at full throttle and get a great chill super fast where with the 25' i may have to throttle down.

 
Reply With Quote
Old 08-09-2012, 09:19 PM   #4
RTL
Recipes 
 
Mar 2012
Posts: 216
Liked 13 Times on 12 Posts


If you have a pump I'd go CFC, just personal preference. If you plan on doing large batches ever in your life I would build a 50' IC. That said a solderless copper CFC would be a slight step up in price but IMO a better solution. You can gravity feed a CFC and people do it without issue but I've never tried it. Whatever you build post some pics. Good luck.

 
Reply With Quote
Old 08-09-2012, 10:12 PM   #5
krazydave
 
krazydave's Avatar
Recipes 
 
Aug 2010
Santa Clarita, California
Posts: 925
Liked 32 Times on 30 Posts


I think a 25' 3/8" CFC is perfect. Any more and you're just wasting money on copper and slowing your wort down too much.
If you do a 50' 1/2", that might be a different story, though. 50' of 1/2" copper is gonna be some serious dough though these days.

Guitarboarder Likes This 
Reply With Quote
Old 08-10-2012, 06:56 AM   #6
3BB001
Recipes 
 
Feb 2012
Upstate, NY
Posts: 136
Liked 15 Times on 11 Posts


I just converted my 50' 3/8" IC into a 50' CFC and it works great. Why use both a CFC and pre chiller when you can make life simpler with a larger CFC?

Guitarboarder Likes This 
Reply With Quote
Old 08-10-2012, 12:04 PM   #7
Wunderduck
Recipes 
 
Mar 2012
Posts: 22
Liked 3 Times on 3 Posts


Quote:
Originally Posted by 3BB001
I just converted my 50' 3/8" IC into a 50' CFC and it works great. Why use both a CFC and pre chiller when you can make life simpler with a larger CFC?
If your tap water temp is higher than your pitching temp, your cfc could be 1000 miles long and not be as effective as a 25' cfc with a pre chiller.

Guitarboarder Likes This 
Reply With Quote
Old 08-11-2012, 12:09 AM   #8
RTL
Recipes 
 
Mar 2012
Posts: 216
Liked 13 Times on 12 Posts


Quote:
Originally Posted by Wunderduck View Post
If your tap water temp is higher than your pitching temp, your cfc could be 1000 miles long and not be as effective as a 25' cfc with a pre chiller.
Good point.

I just noticed you are talking about making a CFC, I thought you were debating making a 50' IC or a 25' CFC, my bad.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
50 foot 1/2 inch SS coil Gear101 Chillers & Stir Plates 233 09-23-2016 02:06 AM
My 8-foot bar build Thirstin4aburstin Kegerators & Keezers 59 10-04-2013 07:16 PM
Do you use a 25 foot CFC? kklowell Chillers & Stir Plates 10 10-26-2011 07:41 AM
2 foot brew table ok? jsguitar Brew Stands 2 07-29-2011 01:38 AM
50 foot CFC ~ to a plate chiller? CharlosCarlies Chillers & Stir Plates 11 01-18-2010 09:09 PM


Forum Jump