rance temp probe question - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > rance temp probe question

Thread Tools
Old 07-29-2012, 12:35 AM   #1
lpdb185's Avatar
Sep 2009
Jackson, Mississippi
Posts: 428

okay, i ordered a thermowell a while back and finally got around to trying it out. my ranco probe didn't quite fit. i remembered reading about having to shave the coating off the probe--but apparently that advice was not in regards to the ranco probes. so after i started trying to shave some of the material off, i realized that this thing is apparently plastic all the way through.

so, did i ruin the probe, or should i just keep going until it fits? also, would a love temp probe work with the ranco, since i'm about to order some stuff from dwyer anyway?

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Temp Probe Location? mlyday Equipment/Sanitation 4 09-02-2010 05:25 PM
Cooler MLT Temp Probe Dog House Brew Equipment/Sanitation 4 02-04-2010 03:26 AM
HERMS Temp Probe Question chode720 Equipment/Sanitation 1 08-20-2009 03:13 AM
Temp. Probe Dwain Equipment/Sanitation 1 05-01-2009 07:48 PM
blichmann temp probe insco2 Equipment/Sanitation 9 12-25-2005 08:04 PM

Forum Jump