Home Brew Forums > Home Brewing Beer > Brew Science > Water adjustment questions
Reply
 
Thread Tools
Old 07-28-2012, 01:16 PM   #1
disney7
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: Maryville, TN
Posts: 385
Liked 58 Times on 40 Posts
Likes Given: 7

Default Water adjustment questions

This will be my first time adjusting my mash water. I've read the primer, but I have a few questions since I have my actual water report.

First, the data:

pH 7.8
Total Dissolved Solids (TDS) Est, ppm 59
Electrical Conductivity, mmho/cm 0.10
Cations / Anions, me/L 0.7 / 0.7
ppm
Sodium, Na 5
Potassium, K < 1
Calcium, Ca 7
Magnesium, Mg 2
Total Hardness, CaCO3 26
Nitrate, NO3-N < 0.1 (SAFE)
Sulfate, SO4-S < 1
Chloride, Cl 8
Carbonate, CO3 < 1
Bicarbonate, HCO3 28
Total Alkalinity, CaCO3 23
Total Phosphorus, P 0.94
Total Iron, Fe < 0.01
"<" - Not Detected / Below Detection Limit

Grain Bill:

17 lbs 6.9 oz Pale Malt (2 Row) UK (3.0 SRM) Grain 2 88.9 %
13.9 oz Caramel/Crystal Malt - 40L (40.0 SRM) Grain 3 4.4 %
7.0 oz Honey Malt (25.0 SRM) Grain 4 2.2 %
7.0 oz Munich Malt (9.0 SRM) Grain 5 2.2 %
3.5 oz Caramel/Crystal Malt -120L (120.0 SRM) Grain 6 1.1 %
3.5 oz Pale Chocolate (200.0 SRM) Grain 7 1.1 %

Using the EZ water calculator spreadsheet, I'm thinking about adding:

3.5 grams Calcium Chloride
3.0 grams Epsom Salt
1 ml lactic acid (to bring the pH down)

per 5 gallons of water.

These numbers seem to get all the numbers in the recommended ranges and bring the pH down into the right spot.

Looks like my water is very soft and the only thing I'm adding over the Primer's baseline is the epsom salts.

Am I on the right track?


disney7 is offline
 
Reply With Quote
Old 07-28-2012, 01:42 PM   #2
mabrungard
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
mabrungard's Avatar
Recipes 
 
Join Date: Feb 2011
Location: Carmel, IN
Posts: 3,255
Liked 306 Times on 255 Posts
Likes Given: 29

Default

Unless you want to have the bitterness contribution of the magnesium, there is little reason to add epsom salt. In a pale ale, this would be OK. But in less bittered styles, you could easily leave that out. If its the sulfate you're after, then using gypsum may be a better alternative.


__________________
Martin B
Carmel, IN
BJCP National
Foam Blowers of Indiana (FBI)

Brewing Water Information at:
https://sites.google.com/site/brunwater/

Like Bru'n Water on Facebook for occasional discussions on brewing water and Bru'n Water
https://www.facebook.com/pages/Brun-...?ref=bookmarks
mabrungard is offline
 
Reply With Quote
Old 07-28-2012, 02:33 PM   #3
disney7
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: Maryville, TN
Posts: 385
Liked 58 Times on 40 Posts
Likes Given: 7

Default

I was adding the epsom to raise the magnesium levels for the yeast, since my water is very low in mg. But I don't want additional bitterness, this beer should be malty (strong scotch ale).

So, how does this look:

3.5 grams Calcium Chloride
3.0 grams Gypsum
1 ml lactic acid (to bring the pH down)

I was also trying to adjust the sulfate to chloride ratio for balanced or maltiness. That's why I'm adding something with the CaCl. How important is that?

I use a yeast nutrient at the end of the boil. Will that and the malt take care of the mg levels that the yeast need?
disney7 is offline
 
Reply With Quote
Old 07-28-2012, 04:17 PM   #4
cscade
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
cscade's Avatar
Recipes 
 
Join Date: Feb 2009
Location: Wooster, Ohio
Posts: 456
Liked 16 Times on 13 Posts
Likes Given: 1

Default

Magnesium is rarely something you need to worry about adding. Plenty (for the yeast) will be freed up in the mash, from the malt.

Personally, I would go for the calculated calcium addition which will bring your mash pH down, skip the salts and the gypsum, and only add the lactic acid if you need to according to your pH meter. If you don't measure your mash pH, I would still err on the side of not using the acid. Spreadsheets can get you close, but acid additions are a delicate thing and I don't recommend them without tools.

I have over-acidified a few mashes, and the flavor is perceptible.
__________________

Seeker Brewing Co.
est. 2008
Build Thread - Blog
cscade is offline
 
Reply With Quote
Old 07-28-2012, 05:43 PM   #5
disney7
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: Maryville, TN
Posts: 385
Liked 58 Times on 40 Posts
Likes Given: 7

Default

What do you mean by "calculated calcium addition"? Then you say skip the salts, which makes me think you mean don't add the CaCl2.

I have a pH meter on the way. So I should check the pH and only add the acid if needed.

Thanks
disney7 is offline
 
Reply With Quote
Old 07-28-2012, 09:27 PM   #6
ajdelange
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Aug 2010
Location: McLean/Ogden, Virginia/Quebec
Posts: 7,450
Liked 956 Times on 756 Posts
Likes Given: 26

Default

As its almost certain that you will need the acid I'd go ahead and add it (consider 2% by wt. sauermalz instead of the liquid - easier to handle and measure and adds some interesting subtleties) and I'd add the calcium chloride too as you are doing that as much for the chloride as the calcium (calcium isn't a very effective means of controlling mash pH - it would take 10.6 grams of calcium chloride in 5 gal to produce the same pH shift as 2% sauermalz). But, that aside, there is no question that a pH check with a decent, properly calibrated meter is better than any spreadheet's calculations or recommendations of mine.


ajdelange is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
EZ Water Adjustment spreadsheet -TH- Brew Science 194 04-01-2012 05:13 AM
My first attempt at water adjustment czucker Brew Science 3 05-04-2010 08:21 PM
Water adjustment - Austin, TX water chloramines pale ale anastasis Brew Science 4 04-02-2010 05:31 PM
Getting Started with Water Adjustment sp1365 Brew Science 4 01-25-2010 11:10 PM
First try at water adjustment carp Brew Science 5 10-14-2009 12:32 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS