Why? Fan in the Keezer? Temp Comntroller in the Keezer? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > Why? Fan in the Keezer? Temp Comntroller in the Keezer?

Reply
 
Thread Tools
Old 07-27-2012, 12:52 PM   #1
DPBISME
Recipes 
 
Jul 2012
Alexandria, VA
Posts: 1,030
Liked 84 Times on 65 Posts



I have seen some great Keezers here and I am planning on building two (2) two keg Keezers so I have some questions...

PART ONE: Why? Fan in the Keezer

Yes, I know cold air settles, but in one of these 5 or 7 cubic feet freezers why all the concern about air flow?

My Points so you can help me understand:

I mean air moves around on its own with out any fan.

and

Even if it did not and the cold air is at the bottom... that is where the beer is being drawn from,,, so why not just make sure the bottom of the freezer is the correct temp or even maybe a degree or to lower ...


PART TWO: Temp Controller in the Keezer?

I would like everything self-contained and not have pieces all over the place... So I would like to put the Temp Controller on the inside of the Keezer-collar,,, (the wooden one I add)....

I have almost busted off the one on my current keezer a few time moving it because it is monuted on the outside... and the same for my fernemtation freezer... I have to move two things all the time and I would like to move one...

The only reason I can see not to do this is moisture?

 
Reply With Quote
Old 07-27-2012, 01:37 PM   #2
purplehaze
Recipes 
 
Mar 2011
, Massachusetts
Posts: 390
Liked 23 Times on 23 Posts


There are no fans in my keezer with six kegs on the floor and the beer is always cold. I do have a little condensation which the fans supposedly reduce/eliminate.

I built the temp controllers into coffins so there is no issue when pushing the keezer around. If you are worried about moisture affecting the controller you could build a small box around it on the inside of the collar.

 
Reply With Quote
Old 07-27-2012, 01:44 PM   #3
DPBISME
Recipes 
 
Jul 2012
Alexandria, VA
Posts: 1,030
Liked 84 Times on 65 Posts


Quote:
Originally Posted by purplehaze View Post
There are no fans in my keezer with six kegs on the floor and the beer is always cold. I do have a little condensation which the fans supposedly reduce/eliminate.

I built the temp controllers into coffins so there is no issue when pushing the keezer around. If you are worried about moisture affecting the controller you could build a small box around it on the inside of the collar.
AHhhhh,,,, "condensation" something I had not considered... and something that "I got in Spades" in my current 6 Keg keezer but I think it is mostly because of the fact I am lazy and don't like cleaning the "lines"... so when there is no great need to have all the taps running I use "Cobra-Heads" and open it up to get to the beer.

Thanks,

DPB

 
Reply With Quote
Old 07-27-2012, 01:45 PM   #4
kellzey
Recipes 
 
Aug 2011
orlando, FL
Posts: 310
Liked 16 Times on 14 Posts


The wooden collar does not have cooling cools running through it like the walls of the freezer, so it can be up to 2 degrees warmer. Since this is where your tap and lines run, the temperature differential can cause condensation issues. The fan just helps equalize temperature through out.

I have a Johnson external temperature controller that is just mounted on the backside of the collar. I drilled a small hole and ran the probe inside. I filled the caps in the hole with plumbers putty.

My keezer is 8 cu ft. and yes, the fan DID make a difference. I just bought a tiny AC powered fan at Radio Shack and wired it directly to a plug and plugged it into the same outlet the keezer is plugged into.
__________________
Black Pug Brewing - Progress Thread

In the fermenter: Pugkin Ale, Apfelwein
In the keezer: Black Pug Coconut Porter, Black Pug Wheat, Black Pug IPA
Gone: Black Pug Blonde Ale

 
Reply With Quote
Old 07-27-2012, 01:55 PM   #5
solbes
Recipes 
 
Jul 2011
Ramsey & Akeley, Mn
Posts: 2,975
Liked 237 Times on 217 Posts


You want to keep the tap and beer lines close to the same temp as the kegged beer. If cold beer is suddenly warmed by beer lines, tap faucet, warm glass, etc it creates foam. Thats why the first 1/4 pint that is poured foams more than the rest. I usually pour a 1/4 pint, set it aside and fill my wife's glass (who likes less head, joke away!). Then come back and fill the rest of my pint glass.

I don't have fans, but put the beer line inside 1/2" copper pipes. The cooler air from the fridge is conducted along the pipe, keeping the beer line and tap cooler. No fan necessary. This is on a kegerator though, so not sure its applicable for your question.
__________________
Primary #1: Umlaut my Kölsch VII #2: Empty
Secondary #1
: Empty #2: Empty #3: Cab MerMarqeNac Wine
Kegged
: Mugged a Monk Paters
Bottles
: Dark Belgian Strong, Black Raspberry Rhubarb wine, RIS, Carmel Apple Cider, Big 50 Barleywine, Framboise Lambic, Barolo Wine, Berry Rhubarb Wine, Black Currant wine
On Deck: BGSA

 
Reply With Quote
Old 07-27-2012, 04:25 PM   #6
3BB001
Recipes 
 
Feb 2012
Upstate, NY
Posts: 139
Liked 15 Times on 11 Posts


I have my ebay temp controller built into the wooden collar on my 14.8 cuft keezer with no issues.

 
Reply With Quote
Old 07-27-2012, 09:07 PM   #7
Toymaker
Arrgh!
HBT_SUPPORTER.png
 
Toymaker's Avatar
Recipes 
 
Feb 2012
Livonia, Michigan
Posts: 154
Liked 25 Times on 16 Posts


My temp controller is mounted on a bracket inside the keezer with no issues.
__________________
Cheers,
Gary

 
Reply With Quote
Old 07-30-2012, 03:16 AM   #8
hs0656
Recipes 
 
May 2011
, WY
Posts: 113
Liked 1 Times on 1 Posts


Quote:
Originally Posted by kellzey
My keezer is 8 cu ft. and yes, the fan DID make a difference.
How many kegs you fitting in an 8 cu ft?

 
Reply With Quote
Old 07-30-2012, 11:42 AM   #9
rekoob
HBT_LIFETIMESUPPORTER.png
 
rekoob's Avatar
Recipes 
 
Feb 2011
Norfolk, VA
Posts: 1,426
Liked 107 Times on 82 Posts


Helps with my condensation to some point and if it's outside in colder climate you may need to run a heat source which in my experience a fan will be needed to move the air around or it doesn't maintain temps very well. Unless you're using a heater with a fan in it already.

 
Reply With Quote
Old 07-30-2012, 11:49 AM   #10
DPBISME
Recipes 
 
Jul 2012
Alexandria, VA
Posts: 1,030
Liked 84 Times on 65 Posts


Quote:
Originally Posted by hs0656 View Post
How many kegs you fitting in an 8 cu ft?
I did some sizing recently by taking to Corney Kegs to Home Depot.
  1. 5 CF 2 Kegs
  2. 7 CF 3 Kegs

I have a Keezer in the house that holds 6 (with a 20 lb CO2 tank) but I will have to go look up it's size.

I also have a chest freezer in my camp site (with the compressor cut out) that I use as a Ice Chest and it holds 4 (no---update--- it holds 5) I think it is a 8.8 CF

 
Reply With Quote


Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
The keezer build is finally finished! Keezer porn attached. GRHunter Kegerators & Keezers 21 08-31-2014 01:16 AM
Jersh's Keezer build... Keezer thread #1,493,829 Jersh Kegerators & Keezers 40 05-22-2014 12:19 PM
Keezer temp controller? kenpotf Kegerators & Keezers 4 10-02-2011 01:08 AM
Multi-temp Keezer badhabit Kegerators & Keezers 4 08-24-2011 03:55 PM
Keezer temp ? pickles Kegerators & Keezers 4 06-15-2008 07:58 PM


Forum Jump