Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Test those thermometers before you brew......
Reply
 
Thread Tools
Old 07-19-2007, 05:17 PM   #1
FSR402
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
FSR402's Avatar
Recipes 
 
Join Date: May 2007
Location: Jenison, MI
Posts: 2,885
Liked 17 Times on 15 Posts
Likes Given: 1

Default Test those thermometers before you brew......

The first 3 brews I did I used the thermometer that came with my cooker. Going by the boil point of 212 I figured that it was about 5 - 10 degs off. The gauge is small so it was hard to tell. Not to bad I guess I could deal with that. Plus I did not really think to much off it.
The 4th brew I used a digital thermometer and I felt that this was a safe way to go. Well we did a PM brew and all seemed well. Then when it came time to cool the wort it took for ever.. WAY longer then the others did. It was going on 40 minutes and the thermometer was saying that I was still at 114*.. WTF? So I quick sanitized another thermometer and checked it, 60*... Hmmm...

What a mess, the digital one was messed up and wont read under 114, the one that came with my cooker turned out to be 30* off, 30* low. So when I thought I was steeping at 150 it was really 180. I'm amazed that the beers are turning out as good as they are.

I now have a good brewing thermometer in my brew pot that I have tested and when the water boiled it read 212.
So heed my warning, test those thermometers....


__________________
TWO FISTED BREWING CO.

Quote:
Originally Posted by mr_cad View Post
Its nice when you and your friends have comparable equipment.
Quote:
Originally Posted by Walker-san View Post
some people will tap anything that has a hole.
Buy Two Fisted Brewing gear
FSR402 is offline
 
Reply With Quote
Old 07-19-2007, 05:30 PM   #2
Lil' Sparky
Cowboys EAC
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Lil' Sparky's Avatar
Recipes 
 
Join Date: Feb 2006
Location: Honolulu, HI
Posts: 4,013
Liked 58 Times on 36 Posts

Default

If it's one of those with an exposed braid, you can't get them wet. If you do, then they'll act like you describe. There's no way to tell if it was still working correctly when you were steeping. You may have been fine.

There's a way to fix the digital thermo. I think you stick it in the oven on 350 for an hour or two. That will dry it out and reset it.

You can also waterproof the probe http://www.homebrewtalk.com/showthre...silicone+probe so that it doesn't happen again.


Lil' Sparky is offline
 
Reply With Quote
Old 07-19-2007, 05:42 PM   #3
Bearcat Brewmeister
Pour, Drink, Pee, Repeat
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Bearcat Brewmeister's Avatar
Recipes 
 
Join Date: Feb 2006
Location: Cincinnati, OH
Posts: 705
Liked 20 Times on 7 Posts

Default

Been there myself with the braid. My wort was coming to a boil and I needed to walk away so I monitored the speed of temp increase. It took 45 seconds to go from 206 to 207, so I figured I had at least 3 to 4 minutes before 212. I come back in 3 minutes and I have a massive boil over and my digital thermometer was stuck at 210 until I dried it out in the oven. I had forgotten to correct for altitude and even though Cincinnati isn't at a very high altitude (800ft), it is good for almost a 2 degree change in boiling point.
__________________
Kegged: APA, Old Ale, Bock, Robust Porter
Secondary:
--
Primary:
Imperial Milk Stout
Next Up: --
Projects: Brutus Strut-stand (Done), Freezer Conversion (Done), HERMS (Done), Lager Fermentation Mini-fridge Extension (Done)
Drinking: Great Lakes Edmund Fitzgerald, Fuller's 1845, New Glarus Moon Man, Tröegs Troegenator
Bearcat Brewmeister is offline
 
Reply With Quote
Old 07-19-2007, 06:03 PM   #4
billpa
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
billpa's Avatar
Recipes 
 
Join Date: Mar 2007
Location: Downingtown, PA
Posts: 161
Default

Quote:
Originally Posted by Bearcat Brewmeister
my digital thermometer was stuck at 210 until I dried it out in the oven
You were able to fix the braid getting wet by cooking the entire probe in the oven? Just curious as I have one that has the same problem.
__________________
Next up: Honey Brown Ale, Raspberry Blonde Ale, Oatmeal Stout
Primary: Strawberry Melomel
Secondary:
Conditioning:
Drinking: Apfelwein, ESB, Cream Ale, Mocktoberfest Ale
billpa is offline
 
Reply With Quote
Old 07-19-2007, 06:07 PM   #5
FSR402
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
FSR402's Avatar
Recipes 
 
Join Date: May 2007
Location: Jenison, MI
Posts: 2,885
Liked 17 Times on 15 Posts
Likes Given: 1

Default

Quote:
Originally Posted by Lil' Sparky
If it's one of those with an exposed braid, you can't get them wet. If you do, then they'll act like you describe. There's no way to tell if it was still working correctly when you were steeping. You may have been fine.

There's a way to fix the digital thermo. I think you stick it in the oven on 350 for an hour or two. That will dry it out and reset it.

You can also waterproof the probe http://www.homebrewtalk.com/showthre...silicone+probe so that it doesn't happen again.
Yes it got wet. I did not know that it could not get wet.
So I now have to bake the braid probe? would that not melt it?
__________________
TWO FISTED BREWING CO.

Quote:
Originally Posted by mr_cad View Post
Its nice when you and your friends have comparable equipment.
Quote:
Originally Posted by Walker-san View Post
some people will tap anything that has a hole.
Buy Two Fisted Brewing gear
FSR402 is offline
 
Reply With Quote
Old 07-19-2007, 06:17 PM   #6
Lil' Sparky
Cowboys EAC
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Lil' Sparky's Avatar
Recipes 
 
Join Date: Feb 2006
Location: Honolulu, HI
Posts: 4,013
Liked 58 Times on 36 Posts

Default

They're designed to go in the oven. Just don't put any plastic parts in there. What are you worried about melting?
Lil' Sparky is offline
 
Reply With Quote
Old 07-19-2007, 07:03 PM   #7
FSR402
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
FSR402's Avatar
Recipes 
 
Join Date: May 2007
Location: Jenison, MI
Posts: 2,885
Liked 17 Times on 15 Posts
Likes Given: 1

Default

Quote:
Originally Posted by Lil' Sparky
They're designed to go in the oven. Just don't put any plastic parts in there. What are you worried about melting?
the plastic end that plugs into the box.
__________________
TWO FISTED BREWING CO.

Quote:
Originally Posted by mr_cad View Post
Its nice when you and your friends have comparable equipment.
Quote:
Originally Posted by Walker-san View Post
some people will tap anything that has a hole.
Buy Two Fisted Brewing gear
FSR402 is offline
 
Reply With Quote
Old 07-19-2007, 10:29 PM   #8
Lil' Sparky
Cowboys EAC
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Lil' Sparky's Avatar
Recipes 
 
Join Date: Feb 2006
Location: Honolulu, HI
Posts: 4,013
Liked 58 Times on 36 Posts

Default

Right, don't put that in the oven.


Lil' Sparky is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Taste test from my first home brew momodig Beginners Beer Brewing Forum 5 07-29-2009 02:51 AM
Gonna be doing a test brew this weekend xxdcmast Recipes/Ingredients 13 02-18-2009 09:26 PM
Bottling a test soda bottle for squeeze test? beergears Beginners Beer Brewing Forum 5 11-07-2007 11:10 PM
are there any test to see if the wine i brew is dangerous jimbotheclown Wine Making Forum 7 04-05-2007 04:12 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS