Dual Product Regulator release valve Problem - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Dual Product Regulator release valve Problem

Thread Tools
Old 07-17-2012, 12:41 AM   #1
Aug 2010
, Nova Scotia
Posts: 11

Just bought a dual product regulator. Attached to my CO2 tank, tightened everything up/ clamped all my connections tightly. Turned on the tank and the CO2 seems to just blow out of the second pressure release valve (furthest from tank).

I assumed the regulator was pretty straight forward, but besides concluding that I got a regulator with a bum valve, what steps can I take to prevent / remedy this if any? I pulled on it to see if it was stuck, but it springs back into place. I double checked all my connections and tightened them as much as I could.

I attached a couple of pics. Any suggestions would be greatly appreciated. It feels like something straight forward i'm missing that a noob would do, such as myself...

Click image for larger version

Name:	regulator2.JPG
Views:	176
Size:	56.2 KB
ID:	68559   Click image for larger version

Name:	regulator1.JPG
Views:	173
Size:	53.8 KB
ID:	68560  

Reply With Quote
Old 07-17-2012, 11:40 PM   #2
Apr 2012
Carlisle, PA
Posts: 1,206
Liked 29 Times on 28 Posts


The relief valve just unscrews from the regulator body. There may be something simple wrong like a chunk of crud in the seal.


Reply With Quote
Old 07-18-2012, 03:37 AM   #3
Registered User
Dec 2009
Huntsville, Alabama
Posts: 821
Liked 38 Times on 35 Posts

There may be something trapped in the valve or the seal inside might be damaged.

And BTW, good luck with this one - looks like a cheap Chinese knockoff.

I suggest returning it.

Reply With Quote
Old 07-19-2012, 08:35 PM   #4
Jul 2012
Posts: 3

I had the same problem with the same reg when I gassed it up not hooked to a keg when I hook the keg up to that line it stopped and there are no leaks anywhere else

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dual product regulator necessary? jc03 Bottling/Kegging 5 01-31-2012 12:05 PM
PSI Problem - Dual Body CO2 Regulator GnvBrewer80 Bottling/Kegging 1 01-09-2012 12:06 AM
2 keg setup - dual body regulator vs. regulator with dual output manifold heyjaffy Bottling/Kegging 11 02-18-2011 10:17 PM
Taprite Dual Body Regulator Check Valve Question xinunix Bottling/Kegging 4 02-05-2010 12:52 AM
Problem adjusting dual body regulator Richard-SSV Bottling/Kegging 2 11-24-2009 03:20 PM

Forum Jump