Coldbreak Brewing Giveaway - Winners Drawn!

Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Cooler vs keg or SS pot for HLT?
Reply
 
Thread Tools
Old 07-14-2012, 01:26 PM   #1
smbuckley
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2012
Location: new york, ny
Posts: 24
Likes Given: 1

Default Cooler vs keg or SS pot for HLT?

I was thinking of getting a 5 gallon cooler to serve as a HLT and complete my 3 tier system. I was gonna just heat my sparge water and dump it in the cooler then attach a valve (similar to my mash tun) and attach some silicone tubing to that which attaches to a fly sparge over my mash tun. So, what is the difference between coolers, kegs, and pots for HLT? What have your experiences been? And if I get a cooler do you think 5 gallons is big enough (I'm only doin 5 gallon batches now)? Thanks


smbuckley is offline
 
Reply With Quote
Old 07-14-2012, 01:44 PM   #2
Gartywood
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jul 2011
Location: Windsor, CT
Posts: 306
Liked 10 Times on 10 Posts
Likes Given: 2

Default

5 gallon should be large enough for some brews you might have to dump in an extra gallon part way through the sparge not the end of the world. The big difference with a kettle is that your go directly from fired kettle to sparging but you'll have to run the burner to maintain your sparge temp. (or deal with losing a few degrees during your sparge. So with a kettle you might find that you need (or really want) a burner at the too of your stand.


Gartywood is offline
 
Reply With Quote
Old 07-14-2012, 01:45 PM   #3
jldc
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
jldc's Avatar
Recipes 
 
Join Date: Nov 2008
Posts: 662
Liked 6 Times on 6 Posts

Default

Coolers work fine with a ball valve for MLT's. I'd get a 10 gallon size. To pitch 5 gallons you need 5.5 gallons in the kettle. To end with 5.5 gallons in the kettle, you may have to start with 7 or more gallons before a 90 min boil. That may require sparging with over 5 gallons of water. Get a 10 gallon cooler and that's not a problem.

L
jldc is offline
 
Reply With Quote
Old 07-14-2012, 02:29 PM   #4
CBK
Feedback Score: 1 reviews
Recipes 
 
Join Date: Nov 2009
Location: Rochester, NY
Posts: 259
Liked 5 Times on 5 Posts
Likes Given: 6

Default

A 5 gallon HLT would work for most brews however for a high gravity beer or a 90 minute boil more than 5 gallons of sparge water may be required. If you only have 1 burner and plan to use gravity to fly sparge (3 tier) a cooler would probably be your best solution because they will hold heat better than an ss pot or keg. Good luck and happy brewing. Cheers
CBK is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cooler MLT theganda All Grain & Partial Mash Brewing 4 03-20-2009 03:39 AM
MLT cooler ? addis29 All Grain & Partial Mash Brewing 12 11-02-2008 05:47 PM
Using a 10 gal Cooler for PM? tbone All Grain & Partial Mash Brewing 3 11-09-2007 05:10 PM
Using a bag in the cooler? Ryanh1801 All Grain & Partial Mash Brewing 16 04-04-2007 02:22 PM
48 Qt rectangular cooler Vs 5 gal round cooler davidkrau All Grain & Partial Mash Brewing 18 03-06-2006 03:34 PM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS