Coldbreak Brewing Giveaway - Winners Drawn!

Home Brew Forums > Home Brewing Beer > DIY Projects > Fermenters > Fementation Chamber
Reply
 
Thread Tools
Old 07-11-2012, 10:51 PM   #1
chrisdaman77
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2012
Location: West Chazy, New York
Posts: 113
Liked 2 Times on 1 Posts
Likes Given: 15

Default Fementation Chamber

my fermentation chamber is half way built but stumped on the thermostat and computer fan wiring. I know there is going to be 2 wires from the 110 to 12 volt plug along with 2 wires from the fan. Am I right in putting the hot wire from the plug to the "cooling power supply" on the thermo and the "hot" wire from the fan to the "cooling output" and the attach the grounds from the plug and fan?


Click image for larger version

Name:	image-2937041807.jpg
Views:	1061
Size:	23.5 KB
ID:	67942  
__________________
Next Up: Unsure

Primary 1: Brown Ale

Primary 2: White House Honey Porter

Primary 3: Empty

Secondary: Empty

Bottled: Weizenbier, Dunkelweizen, Amber Ale, Octoberfest

Keg: Red Ale

Reason: Fixed some spelling errors that my phone made!
chrisdaman77 is offline
 
Reply With Quote
Old 07-12-2012, 12:51 AM   #2
carlisle_bob
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2012
Location: Carlisle, PA
Posts: 1,205
Liked 29 Times on 28 Posts

Default

Hi

What kind of setup are you building?

If you are wiring computer fans on a swamp cooler and it's hooking to +12 VDC then your hookup sounds about right.

Bob


carlisle_bob is offline
 
Reply With Quote
Old 07-12-2012, 02:14 AM   #3
chrisdaman77
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2012
Location: West Chazy, New York
Posts: 113
Liked 2 Times on 1 Posts
Likes Given: 15

Default

I am doing the Son of a Fermentation chamber...just a bit bigger. I will be able to do 2 different kinds at a time. The only issue I am going to have is this winter when my front porch is cold. May have to invest in a small heater for out there to help regulate the temp.
chrisdaman77 is offline
 
Reply With Quote
Old 07-13-2012, 12:08 AM   #4
chrisdaman77
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2012
Location: West Chazy, New York
Posts: 113
Liked 2 Times on 1 Posts
Likes Given: 15

Default

So had everything wired up but still would not go. Looked at it some more then took the jumper out and put it on the other side for the cooling output and fan and then ali bing it worked! Would have taken some pictures of the build but was in a cramped space as it was. Will have finished product pics up hopefully this weekend.
chrisdaman77 is offline
 
Reply With Quote
Old 07-17-2012, 02:18 AM   #5
chrisdaman77
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2012
Location: West Chazy, New York
Posts: 113
Liked 2 Times on 1 Posts
Likes Given: 15

Default

Had a brainstorm today. I was thinking to myself how could I make this thing even better. I came up with 2 options. First I could use a 5000 btu ac and build it into the back of it. With this option I still will have condensation to deal with that come out of the rear of the ac. My other option would be a 1.7cf mini fridge($65) built in to the rear which would be controlled by an external controller. What do you all think?
chrisdaman77 is offline
 
Reply With Quote
Old 07-19-2012, 04:49 PM   #6
chrisdaman77
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2012
Location: West Chazy, New York
Posts: 113
Liked 2 Times on 1 Posts
Likes Given: 15

Default

Ok so a little bit of an update with pictures. So I spotted a mini fridge on CL for $20 and jumped on it. It is only a 1.7 but was surprised to find out that it was an electronic cooling unit. Which means no tubing or the likes. I am going to integrate the fans and coolers along with the electronic board in the back. I am thinking of going down to get a project box from radio shack for the board to keep it closed in. Anyone ever used these before, the cooling system?
Click image for larger version

Name:	IMG_0700.jpg
Views:	716
Size:	65.2 KB
ID:	68910   Click image for larger version

Name:	IMG_0701.jpg
Views:	683
Size:	39.3 KB
ID:	68911   Click image for larger version

Name:	IMG_0702.jpg
Views:	694
Size:	51.6 KB
ID:	68912   Click image for larger version

Name:	IMG_0703.jpg
Views:	687
Size:	49.0 KB
ID:	68913   Click image for larger version

Name:	IMG_0704.jpg
Views:	688
Size:	42.3 KB
ID:	68914  

chrisdaman77 is offline
2
People Like This 
Reply With Quote
Old 07-19-2012, 07:45 PM   #7
chrisdaman77
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2012
Location: West Chazy, New York
Posts: 113
Liked 2 Times on 1 Posts
Likes Given: 15

Default

Not the prettiest setup but then again who sees the back! Just have to put the interior fans in and hook it back up and see what it does.
Click image for larger version

Name:	image-758989250.jpg
Views:	607
Size:	31.5 KB
ID:	68932  
__________________
Next Up: Unsure

Primary 1: Brown Ale

Primary 2: White House Honey Porter

Primary 3: Empty

Secondary: Empty

Bottled: Weizenbier, Dunkelweizen, Amber Ale, Octoberfest

Keg: Red Ale
chrisdaman77 is offline
 
Reply With Quote
Old 07-19-2012, 08:00 PM   #8
LabRatBrewer
Lost in a Maze
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
LabRatBrewer's Avatar
Recipes 
 
Join Date: Dec 2011
Location: Laguna Niguel, CA
Posts: 2,993
Liked 1002 Times on 701 Posts
Likes Given: 1539

Default

I like to see how low the temp can be held at.
LabRatBrewer is offline
 
Reply With Quote
Old 07-19-2012, 08:12 PM   #9
chrisdaman77
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2012
Location: West Chazy, New York
Posts: 113
Liked 2 Times on 1 Posts
Likes Given: 15

Default

Me too. Going to be firing it up in about 5 minutes or so.
__________________
Next Up: Unsure

Primary 1: Brown Ale

Primary 2: White House Honey Porter

Primary 3: Empty

Secondary: Empty

Bottled: Weizenbier, Dunkelweizen, Amber Ale, Octoberfest

Keg: Red Ale
chrisdaman77 is offline
 
Reply With Quote
Old 07-19-2012, 09:30 PM   #10
chrisdaman77
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2012
Location: West Chazy, New York
Posts: 113
Liked 2 Times on 1 Posts
Likes Given: 15

Default

So it has been running for about an hour and a half now and has dropped around 15 degrees or so. I do notice one thing I need to do and that is notch some of the insulation so that more of the grate around the fan is allowed to do what it should. I will post a picture to show how it is in a bit.


chrisdaman77 is offline
 
Reply With Quote
Reply


Thread Tools



Forum Jump

Newest Threads

LATEST SPONSOR DEALS