Belgian tripple partial mash - Home Brew Forums
Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Belgian tripple partial mash
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 07-10-2012, 04:37 PM   #1
sirmace
Recipes 
 
Jan 2012
Posts: 13


I have been looking a partial mash/biab recipe for a Belgian tripple. Anyone have one I can try



 
Reply With Quote
Old 07-10-2012, 07:24 PM   #2
mynameissean
Recipes 
 
Mar 2012
Woodinville, WA
Posts: 12

I just finished aging this recipe from Northern Brewer:
http://www.northernbrewer.com/docume...liteTripel.pdf

I didn't buy the kit, just most of the ingredients. It's still sitting in bottles carbing up, but it tastes pretty good so far. Once it reaches full carbonation, I think it'll be quite tasty. I got it down to a pretty low FG (08 I think), so it's not too sweet, and it hides the alcohol in there quite nicely. My primary took about 3 weeks for it to finish out, then I moved it into secondary for about 3 months. I carbonated it to 3.3 volumes.



 
Reply With Quote
Old 07-10-2012, 07:33 PM   #3
Uziyahu
Recipes 
 
Mar 2012
Chicago, IL
Posts: 210
Liked 20 Times on 19 Posts


I just bottled the same kit with a similar timeframe for aging. The hydrometer sample tasted pretty good, so I can't wait for when it's carbed and ready to go. Experimented with corking and high pressure (4.5 volumes). We'll see. I still have another 3 weeks before I'm going to open the first bottle.

 
Reply With Quote
Old 07-11-2012, 01:36 AM   #4
beergolf
HBT_SUPPORTER.png
 
beergolf's Avatar
Recipes 
 
Jan 2011
collingswood, nj
Posts: 5,778
Liked 1112 Times on 757 Posts


A simple Triple recipe is 80% Pils, 20% sugar. Shoot for an OG of 1.075-1.085. Hop to a BU:GU ratio of .38 with 2/3 of the IBU's at 60 and the last 1/3 at 30. I like Saaz but any noble hop works. For yeast a good choice is 3787, but other Belgian yeast works great also.

So just mash as much as you can and make up the difference with Pils DME. to hit the OG you want.

If you need help with the numbers just let me know, but if you have brew software, just plug them in until you hit the % you need.

 
Reply With Quote
Old 07-13-2012, 03:51 PM   #5
kcpup
Recipes 
 
Aug 2009
Missouri
Posts: 268
Liked 5 Times on 4 Posts


BeerGolf's suggestion is a good one. I might suggest a one or two ounces of aromatic malt to his grain bill for a little enhancement.

Make a big starter, and I'd recommend fermenting on the cool side.

Cheers

 
Reply With Quote
Old 07-13-2012, 04:02 PM   #6
j1laskey
Recipes 
 
May 2010
Boston
Posts: 1,800
Liked 205 Times on 163 Posts


You might already know this but just incase, your boil time should be at least 90 minutes to remove as much DMS as possible when using that much Pils.

Cream corn is not that tasty in beer.
__________________
Primary: Hornpout Stout
Secondary:
Kegged: Monsta Pumpkin Mash, Saint Stephens' Eleven Ale, Pirate Strong Ale, Cascadian Dark Ale
The Secretion Brewery

Let's think it over and stop making sense

 
Reply With Quote
Old 07-19-2012, 07:50 PM   #7
sirmace
Recipes 
 
Jan 2012
Posts: 13

is there anything about the fermentation process I need to know temperature control

 
Reply With Quote
Old 07-19-2012, 09:10 PM   #8
beergolf
HBT_SUPPORTER.png
 
beergolf's Avatar
Recipes 
 
Jan 2011
collingswood, nj
Posts: 5,778
Liked 1112 Times on 757 Posts


Quote:
Originally Posted by sirmace View Post
is there anything about the fermentation process I need to know temperature control
I like to pitch in the low to mid 60's and then slowly let it rise. This will start fermentation slowly and not get too hot too fast. Alo Belgian yeasts do ot like to have the temp drop so once the temp gets up leave it there until it is done. Give it plenty of time to finish. Belgian yeasts can take a long time to get the last few points.

enjoy..

 
Reply With Quote
Old 07-20-2012, 04:58 AM   #9
hunterscott_
Recipes 
 
Jul 2012
Toronto, ON
Posts: 2

I just finished a batch of triple. Pitched at 18 C for 2 days, moved to 24C for 7 days, transfered to secondary and finished at 28C for the last 5 days. Started at 1076 and finished at 1011. Carbonating now to 3 volumes CO2. First tastings were dry and delicious.

This was all grain, 80% pils and 20% sugar. Belgian golden strong yeast, Saaz hops. With my experience with the style attenuation is really the key. Let the temp run, and take your time with fermentation. Let it finish out for as long as you can wait.



 
Reply With Quote
Reply
Thread Tools



Forum Jump