My Sankey Fermenter Build - Page 2 - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > My Sankey Fermenter Build

Reply
 
Thread Tools
Old 07-08-2012, 04:25 PM   #11
steppenwolph
Recipes 
 
Oct 2010
phila, pa
Posts: 78
Liked 2 Times on 2 Posts


Very nice work there, bt. That weld is sexy! Did you think about keeping the original fitting on the top, and making your new hole on the bottom of the keg? That way you could mount a 2" tri-clamp on it to make a convenient dump valve. Of course, then you got to put legs on you fermenter. Still, its great to have a big enough opening for access to the inside. I want one!

 
Reply With Quote
Old 07-08-2012, 04:37 PM   #12
btgold29
 
btgold29's Avatar
Recipes 
 
Jun 2012
Phoenix, AZ
Posts: 58
Liked 2 Times on 2 Posts


Thanks, I hadn't thought of that, but the "dish" shape at the bottom or top of the keg isn't a steep enough angle to get the trub and yeast out. I think I will eventuality put a rotating racking arm in on the side. Where can one purchase a rotating racking arm?
__________________
Carboy 1 Kern Citra Clone
Carboy 2 "
Carboy 3 Baby Honey Barley Wine
Carboy 4 Amerish Brown
Carboy 5 Amerish Brown

Keg 1 House Pale Ale
Keg 2 House pale Ale dry hopped
Keg 3 French Saison
Keg 4 American Stout

 
Reply With Quote
Old 07-08-2012, 05:13 PM   #13
Stevo2569
 
Stevo2569's Avatar
Recipes 
 
Jan 2011
C-VILLE, Tn
Posts: 1,283
Liked 32 Times on 25 Posts


Exactly what I was thinking of doing.
__________________
Fermentation may have been a greater discovery than fire."
-David Rains Wallace


My Brewing Apparatus

 
Reply With Quote
Old 07-20-2012, 09:45 PM   #14
btgold29
 
btgold29's Avatar
Recipes 
 
Jun 2012
Phoenix, AZ
Posts: 58
Liked 2 Times on 2 Posts


If you get around to building one I would love to see it. I noticed that Better Bottle makes a small plastic racking arm that requires a 1/2" hole or so, and is removable for cleaning. It might be a great option. Does any body use these small racking arms?
__________________
Carboy 1 Kern Citra Clone
Carboy 2 "
Carboy 3 Baby Honey Barley Wine
Carboy 4 Amerish Brown
Carboy 5 Amerish Brown

Keg 1 House Pale Ale
Keg 2 House pale Ale dry hopped
Keg 3 French Saison
Keg 4 American Stout

 
Reply With Quote
Old 07-20-2012, 10:25 PM   #15
StainlessBrewing
 
StainlessBrewing's Avatar
Recipes 
 
Sep 2009
Gilbert, AZ
Posts: 785
Liked 86 Times on 72 Posts


Quote:
Originally Posted by btgold29 View Post
I think I will eventuality put a rotating racking arm in on the side. Where can one purchase a rotating racking arm?
First off, very sexy weld! I just bought a tig welder myself and still having a tough time on the thin wall stuff. Very nice job! If you need any more sanitary fittings or a custom racking arm made, shoot me an email through the site. Looking forward to see how this turn out.
__________________
Stainless Brewing LLC
Equipment, fittings, valves, tubing, accessories, kegging, custom fabrication and more.
Stainless is Painless at www.stainlessbrewing.com

 
Reply With Quote
Old 07-20-2012, 10:32 PM   #16
btgold29
 
btgold29's Avatar
Recipes 
 
Jun 2012
Phoenix, AZ
Posts: 58
Liked 2 Times on 2 Posts


Thanks!, We spoke on the phone the other day about that rotating racking arm... any luck on finding the fittings needed?
__________________
Carboy 1 Kern Citra Clone
Carboy 2 "
Carboy 3 Baby Honey Barley Wine
Carboy 4 Amerish Brown
Carboy 5 Amerish Brown

Keg 1 House Pale Ale
Keg 2 House pale Ale dry hopped
Keg 3 French Saison
Keg 4 American Stout

 
Reply With Quote
Old 07-20-2012, 10:41 PM   #17
StainlessBrewing
 
StainlessBrewing's Avatar
Recipes 
 
Sep 2009
Gilbert, AZ
Posts: 785
Liked 86 Times on 72 Posts


I did watch the video you sent me and see what you're talking about now. If you don't want to use a racking cane from the top of the cap, send me some dimensions on the cane and I'll bend one up. I noticed on the video they loosen a nut or clamp as well. You can try using a compression fitting with the stainless ferrule and if it drips I'm sure orings would work. I aslo have the sani ferrules (AKA tri-clamp) clamps and gasket if you want to weld that on and go that route. Just and FYI, I could have saved you about $12.00 on your 4" setup plus I'm local.
__________________
Stainless Brewing LLC
Equipment, fittings, valves, tubing, accessories, kegging, custom fabrication and more.
Stainless is Painless at www.stainlessbrewing.com

 
Reply With Quote
Old 07-20-2012, 11:30 PM   #18
btgold29
 
btgold29's Avatar
Recipes 
 
Jun 2012
Phoenix, AZ
Posts: 58
Liked 2 Times on 2 Posts


That's great news. Do you have the 4" products on your web site? I will take another set up because I want to weld up a second one. I think the o-ring idea will work for a rotating racking arm. I'll have to give you a call to discuss. Thanks for the info.
__________________
Carboy 1 Kern Citra Clone
Carboy 2 "
Carboy 3 Baby Honey Barley Wine
Carboy 4 Amerish Brown
Carboy 5 Amerish Brown

Keg 1 House Pale Ale
Keg 2 House pale Ale dry hopped
Keg 3 French Saison
Keg 4 American Stout

 
Reply With Quote
Old 07-21-2012, 03:33 AM   #19
StainlessBrewing
 
StainlessBrewing's Avatar
Recipes 
 
Sep 2009
Gilbert, AZ
Posts: 785
Liked 86 Times on 72 Posts


Quote:
Originally Posted by btgold29
That's great news. Do you have the 4" products on your web site? I will take another set up because I want to weld up a second one. I think the o-ring idea will work for a rotating racking arm. I'll have to give you a call to discuss. Thanks for the info.
They are not up yet but will be in the future. 6" and 8" are available too.
__________________
Stainless Brewing LLC
Equipment, fittings, valves, tubing, accessories, kegging, custom fabrication and more.
Stainless is Painless at www.stainlessbrewing.com

 
Reply With Quote
Old 07-21-2012, 04:40 AM   #20
thelorax121
Recipes 
 
Apr 2009
Athens GA
Posts: 423
Liked 2 Times on 2 Posts


You can buy one here:

http://www.glaciertanks.com/Racking_..._TriClamp.html

I was also thinking of fabbing one up myself. since I don't have TIG capabilities, I was planning on cutting a hole in a blank tri clover cap and then brazing the bend pick up tube into it (with the grooved ends of the cap facing outwards) and then brazing the back side of that to a standard ferrule. It would end up looking like the one I posted, but the parts would probably cost less than $10 since 1.5" and 2" ferrules and caps can be had for cheap, and the only additional material you need is a short length of ss tubing.

Considering you can obviously TIG quite well, it seems like this would be a pretty easy project and save you a fair bit of coin.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Sankey fermenter Wonka Equipment/Sanitation 3 01-24-2012 03:45 PM
Harvesting yeast from a Sankey Fermenter?? nicadrick Equipment/Sanitation 1 09-14-2010 11:31 PM
Calling Sankey Fermenter Owners: Ball Valve Location OneHotKarl Equipment/Sanitation 1 08-26-2010 09:14 PM
Help me build a conical fermenter ddan7 Equipment/Sanitation 4 03-23-2009 03:42 AM
ive got a sankey keg...now what??? Ivan Lendl Equipment/Sanitation 20 03-10-2006 01:30 AM


Forum Jump