"muted" hop presence in many of my beers - Page 2 - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > "muted" hop presence in many of my beers

Reply
 
Thread Tools
Old 07-08-2012, 12:27 PM   #11
Jakeintoledo
HBT_SUPPORTER.png
 
Jakeintoledo's Avatar
Recipes 
 
Jun 2012
toledo, oh
Posts: 263
Liked 24 Times on 17 Posts


Thanks for the input, folks. I did a recipe recently that Sggested adding a bit of gypsum to it, which I did-but it's still conditioning. I'm going to check out to see if there are any water chemistry 'stickies' here, because that's always been in the back of my head...ordinary tap water is all I've ever used, and our water isn't well known for being awesome...

Thx again
__________________
Jake in Toledo
_______________________________________

Primary: Privateer English Pale Ale
Kegged: VEE HAFF VAYS AUF MAKING YOU TALK LOUDLY Dunkel
Bottled: Pacific Pride (American) Pale Ale

 
Reply With Quote
Old 07-08-2012, 12:48 PM   #12
Jakeintoledo
HBT_SUPPORTER.png
 
Jakeintoledo's Avatar
Recipes 
 
Jun 2012
toledo, oh
Posts: 263
Liked 24 Times on 17 Posts


Okay, so I went out and found a water report from the city of Toledo. After reading the chapter on John Palmer's site, it seems like my report doesn't tell me enough about my water. I could be wrong,but I'd say maybe an independent look at it might be needed.

http://ci.toledo.oh.us/LinkClick.asp...id=376&mid=936

I'm pretty sure my water is hard...given the calcium deposits on my shower head any further input would be appreciated.
__________________
Jake in Toledo
_______________________________________

Primary: Privateer English Pale Ale
Kegged: VEE HAFF VAYS AUF MAKING YOU TALK LOUDLY Dunkel
Bottled: Pacific Pride (American) Pale Ale

 
Reply With Quote
Old 07-08-2012, 01:10 PM   #13
barrooze
 
barrooze's Avatar
Recipes 
 
Jan 2009
Pearland, TX
Posts: 2,438
Liked 124 Times on 102 Posts


I didn't see earlier that you were from Toledo. Whenever I've had the tap water there, it didn't seem soft to me. Since water chem seems ok for
IPAs, I'd go with the hop additions recommended above. Hopefully that'll clear up any issues you have.

If you are interested with learning more about water chemistry, check out The Brewing Network's Water Shows: http://thebrewingnetwork.com/shows/B...g/search/water. They give a really good look at what you can do to adjust your water for various styles. Good luck!
__________________
Kegged: BOSON on Rhubarb, Dry-Hopped Sour Brown (ECY01), DIPA, Funky Belgian Table Beer, Breakfast Stout Primary: CYBI Obsidian Stout clone, Citra Dust APA, Hop Dust APA Souring: None On Deck: Oktoberfest-ish Lager On the Horizon: Epic Pale ale clone, Atrial Rubicite clone (ECY20) Updated: 2016/04/09
Untappd: barrooze

 
Reply With Quote
Old 07-08-2012, 04:07 PM   #14
barrooze
 
barrooze's Avatar
Recipes 
 
Jan 2009
Pearland, TX
Posts: 2,438
Liked 124 Times on 102 Posts


Sorry to keep blowing up this thread, but have you tried any beers from the Maumee Bay Brew Pub? I'll bet they're also brewing with Toledo city water. If you like their IPA, you could ask them if they do anything to their water (carbon filter, use gypsum or other water additions, just use straight city water, etc.) and ask if they'd share their hopping additions with you. You can tell them that you've been having issues with a muted hop presence and really like theirs and are wondering how you could improve your beer. Pro brewers typically always like positive feedback and most like to give helpful advice if asked. You could also bring one of your beers and maybe the brewer will try it and give you some advice based on the sample they try.
__________________
Kegged: BOSON on Rhubarb, Dry-Hopped Sour Brown (ECY01), DIPA, Funky Belgian Table Beer, Breakfast Stout Primary: CYBI Obsidian Stout clone, Citra Dust APA, Hop Dust APA Souring: None On Deck: Oktoberfest-ish Lager On the Horizon: Epic Pale ale clone, Atrial Rubicite clone (ECY20) Updated: 2016/04/09
Untappd: barrooze

 
Reply With Quote
Old 07-09-2012, 12:23 AM   #15
Jakeintoledo
HBT_SUPPORTER.png
 
Jakeintoledo's Avatar
Recipes 
 
Jun 2012
toledo, oh
Posts: 263
Liked 24 Times on 17 Posts


Quote:
Originally Posted by barrooze
Sorry to keep blowing up this thread, but have you tried any beers from the Maumee Bay Brew Pub? I'll bet they're also brewing with Toledo city water. If you like their IPA, you could ask them if they do anything to their water (carbon filter, use gypsum or other water additions, just use straight city water, etc.) and ask if they'd share their hopping additions with you.
That is friggin genius, actually.

I know that guy is pretty approachable. I also, come to think of it, know the guys at Sabco, who make the Brew Magic systems--they're also in Toledo.

I kinda feel stupid for not asking this myself.
__________________
Jake in Toledo
_______________________________________

Primary: Privateer English Pale Ale
Kegged: VEE HAFF VAYS AUF MAKING YOU TALK LOUDLY Dunkel
Bottled: Pacific Pride (American) Pale Ale

 
Reply With Quote
Old 07-09-2012, 05:58 AM   #16
nufad
Recipes 
 
Jun 2012
Vancouver, BC
Posts: 78
Liked 1 Times on 1 Posts


Quote:
Originally Posted by Jakeintoledo View Post
One thing I've noticed is a stark difference between my hoppy beers and some of the commercial IPAs, is that my beers have a muted or flat hop presence. Not sure if they're grassy or not, but they definitely seem muted. I don't dry hop and I'm presuming this is why... Most aroma hop additions happen at five minutes before end of boil.

Just wanted to present this to get a bead on whether this is due to boiling off volatile aromatic compounds and I should consider a hop stand or dy hopping?
If the hop flavour is muted and you aren't running a partial boil, then I would take a look at your water chemistry. The flavour of my first few IPAs were muted, then I took a look at my reservoir water reports - all of the relevant brewing ions were below 3ppm. I amended my water with 6g of CaSO4 for a 6 gallon batch, and the hop flavour "popped" just like the commercial brews.

 
Reply With Quote
Old 07-09-2012, 01:27 PM   #17
dannedry
 
dannedry's Avatar
Recipes 
 
Apr 2009
Mason, MI
Posts: 169
Liked 5 Times on 5 Posts


I dry hop the $@&% out of my IPAs. 2-3 oz minimum.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Why two "different" beers? scott1147 All Grain & Partial Mash Brewing 8 05-09-2012 02:51 PM
Flavorful "Small" or "Session" beer. Less base malt? killsurfcity All Grain & Partial Mash Brewing 9 04-22-2012 01:25 PM
Homebrew Economics: Can I really make 890 "light beers" for the price of buying 150? KCBrewer All Grain & Partial Mash Brewing 16 10-30-2010 05:39 AM
Trying to get more "body" in my beers... Techniques? Anthony_Lopez All Grain & Partial Mash Brewing 27 11-23-2009 01:49 AM
"malted" or "roasted" barley Gusizhuo All Grain & Partial Mash Brewing 11 11-03-2007 04:31 AM


Forum Jump