Today's Danby mod thread. Adding a tap or two! - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Today's Danby mod thread. Adding a tap or two!
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 07-04-2012, 05:53 PM   #1
b33rmug
Recipes 
 
Nov 2011
Jacksonville, Florida
Posts: 34
Liked 2 Times on 2 Posts



So I have been using a picnic tap to serve from a second corny for a long time. I was getting close to having a third keg ready to serve from. My birthday was last week so I asked for a couple perlick 525ss taps and a coupe tower shanks.

Thought I would share, I saw some threads when searching where people mentioned adding them, no real after pictures.

With the new shanks installed.


Finished.


I also decided to add a second regulator so I could serve 3 taps and run 2 different pressures (1 to carb, 2 to serve, or 3 to serve, etc.). I still have a high pressure gauge coming. I had left hand threads.



-Eric



 
Reply With Quote
Old 07-04-2012, 10:57 PM   #2
Double-R
Recipes 
 
Mar 2010
Newburgh,NY
Posts: 315
Liked 10 Times on 9 Posts


Well done sir......Well done,Now get to drinking.
__________________
I kiddd,I kiddd.. I joke with U..,

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Is there an adapter to attach metric thread tap handles to a U.S. thread faucet? wipff Bottling/Kegging 4 01-19-2012 04:33 PM
danby 5.8 cf kegerator turboedbug Bottling/Kegging 1 05-04-2010 11:15 PM
Danby Kegerator for 250 on CL. Need help! Bamfordjf Bottling/Kegging 1 04-11-2010 03:20 AM
Today's project: The Cornanke / Sankelius Yuri_Rage Bottling/Kegging 28 02-19-2009 06:11 PM
Danby 4.4 cu. ft. big enough for 2? Brewme Bottling/Kegging 9 01-06-2009 03:52 AM


Forum Jump