Possible cheap air distributor? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Possible cheap air distributor?

Thread Tools
Old 06-28-2012, 04:05 AM   #1
Oct 2011
Amherst, NH
Posts: 12

So, would this work as a manifold:

downsides: no check valve.

BUT... i want to use it to connect up to 4 kegs to a spunding valve for fermenting under pressure. any reason this won't work, or i should go for a more traditional manifold?

Reply With Quote
Old 06-28-2012, 05:52 AM   #2
Mar 2011
baton rouge, Louisiana
Posts: 21

Aquarium pumps do not have hardly any pressure to them i doubt if they push 1 PSI. This thing would explode if you put beer carbonating pressures

Reply With Quote
Old 06-28-2012, 12:46 PM   #3
Hang Glider
Beer Drinker
Hang Glider's Avatar
Mar 2007
North Augusta, SC
Posts: 3,220
Liked 212 Times on 155 Posts

you usually get what you pay for - $3.99 for four valves? I don't know about "exploding" but they won't hold up - they'll leak and drain your CO2 tank in minutes.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Idea for CO2 Distributor/Manifold on the cheap Radix Kettles, Mash Tuns & Hot Liquor Tanks 10 08-17-2011 01:36 PM
CO2 4-way Distributor ghoti Kegerators & Keezers 6 02-12-2011 03:29 AM
Diy gas distributor help 1620HBC Kegerators & Keezers 5 05-20-2010 02:34 AM
Custom CO2 Distributor LoneOakDesign Kegerators & Keezers 24 07-27-2007 03:16 AM
Cheap CO2 Distributor (almost) kvh Kegerators & Keezers 0 07-15-2007 08:12 PM

Forum Jump