Do you ever want to... - Page 2 - Home Brew Forums
Home Brew Forums > Home Brewing Beer > General Beer Discussion > Do you ever want to...

Reply
 
Thread Tools
Old 06-28-2012, 01:56 PM   #11
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
 
Revvy's Avatar
Recipes 
 
Dec 2007
"Detroitish" Michigan
Posts: 40,921
Liked 3180 Times on 1881 Posts


I just still have never figured out why is it that "dumping beer" especially without even knowing if anything is wrong, so prevalent in the mindset of new brewers? It seems to be the knee jerk reaction to every little thing, perceived or otherwise that could go wrong. Is it because we live in such a disposable society, so that things don't really matter, even if they involve time, effort and money to put together? Or is it that new brewers think what they're making is one step away from toxic and therefore a mistake so they think they need to get rid of it?

Maybe it's cause I'm older or something, I just can't see just willy nilly think I need to just scrap something I've put the slightest bit of effort into.

Like my Keezer build for example, I've already got close to a grand into it, and I made a mistake on one of the collar boards, in where I cut a hole, for the power outlet on the back. Rather than scrapping the board, I broke out the woodglue and the piece I cut out, mending plates to hold the piece together while the glue dried and some wood putty. And it looks and feels like there was never a hole cut out. I didn't have to go out and by another 2x8 just to cut one piece of wood out. If it were the front I might have replaced it. But I figured since it's the back side if this worked then I was ahead of the game.


__________________
Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

homebrewdad Likes This 
Reply With Quote
Old 06-28-2012, 01:58 PM   #12
Mishraile
Recipes 
 
Jun 2012
Brainerd, MN
Posts: 124
Liked 12 Times on 12 Posts


I tell them. "yes, you need to dump it, but let me do it. I have a beer dumping recycler at home, and can take care of that for you." /innocent whistle


__________________
"My own beard boasts my brewing ability better than my brewing ability can stand up to."

 
Reply With Quote
Old 06-28-2012, 02:16 PM   #13
SledgeH
Recipes 
 
Jun 2012
Allentown, PA
Posts: 218
Liked 25 Times on 25 Posts


How else would newer members of HBT get our post count up (to make it look like we know what we are doing) if we don't respond to all of these!?

homebrewdad Likes This 
Reply With Quote
Old 06-28-2012, 02:24 PM   #14
homebrewdad
HBT_SUPPORTER.png
 
homebrewdad's Avatar
Recipes 
 
Jan 2012
Birmingham, AL
Posts: 3,270
Liked 384 Times on 279 Posts


Quote:
Originally Posted by SledgeH View Post
How else would newer members of HBT get our post count up (to make it look like we know what we are doing) if we don't respond to all of these!?
Epic.
__________________
Check out the priming sugar calculator, yeast starter calculator, and the beer calorie calculator.

 
Reply With Quote
Old 06-28-2012, 02:26 PM   #15
homebrewdad
HBT_SUPPORTER.png
 
homebrewdad's Avatar
Recipes 
 
Jan 2012
Birmingham, AL
Posts: 3,270
Liked 384 Times on 279 Posts


Quote:
Originally Posted by Revvy View Post
I just still have never figured out why is it that "dumping beer" especially without even knowing if anything is wrong, so prevalent in the mindset of new brewers? It seems to be the knee jerk reaction to every little thing, perceived or otherwise that could go wrong. Is it because we live in such a disposable society, so that things don't really matter, even if they involve time, effort and money to put together? Or is it that new brewers think what they're making is one step away from toxic and therefore a mistake so they think they need to get rid of it?

Maybe it's cause I'm older or something, I just can't see just willy nilly think I need to just scrap something I've put the slightest bit of effort into.

Like my Keezer build for example, I've already got close to a grand into it, and I made a mistake on one of the collar boards, in where I cut a hole, for the power outlet on the back. Rather than scrapping the board, I broke out the woodglue and the piece I cut out, mending plates to hold the piece together while the glue dried and some wood putty. And it looks and feels like there was never a hole cut out. I didn't have to go out and by another 2x8 just to cut one piece of wood out. If it were the front I might have replaced it. But I figured since it's the back side if this worked then I was ahead of the game.
I'm with you, here. Why on earth would you dump it?


The other one that kills me is the recent rash of "I think messed something up. I know that I'm a total noob, but I'm now doing the following nonsensical things to my beer in the fermenter. Will this fix my original imagined problem?" type posts. GLLAAARRRBLBLBLBBBAAARGH!!!!
__________________
Check out the priming sugar calculator, yeast starter calculator, and the beer calorie calculator.

Revvy Likes This 
Reply With Quote
Old 06-28-2012, 02:39 PM   #16
tre9er
Recipes 
 
Jan 2012
Lincoln, NE
Posts: 4,369
Liked 242 Times on 197 Posts


Quote:
Originally Posted by Mishraile View Post
I tell them. "yes, you need to dump it, but let me do it. I have a beer dumping recycler at home, and can take care of that for you." /innocent whistle
I'm using that one next time.
__________________
_________________________________
Skal!
Den Faaborg Bryggeri

Quote:
Originally Posted by davekippen View Post
Open log Fermenting and gas-can secondary?? I am planning my next brew right now!!

 
Reply With Quote
Old 06-28-2012, 02:39 PM   #17
chip82
Recipes 
 
Mar 2010
South Dakota
Posts: 265
Liked 3 Times on 3 Posts


I really wish I could have been the first reply to this thread. I would have replies with "Yeah. Ruined."

 
Reply With Quote
Old 06-28-2012, 02:42 PM   #18
tre9er
Recipes 
 
Jan 2012
Lincoln, NE
Posts: 4,369
Liked 242 Times on 197 Posts


I guess I'm an exaggerationist (new word?). When my kids get a tiny cut I'm always like, "Let's go to the hospital. You know, they MIGHT have to cut it off at this point." Of course, they know I'm joking...I wouldn't ever make them cry or upset. I DO love the hell out of them...but I also like to mess with people. So when I see the posts I just want to respond with a short answer to just the title, without reading the post.

But I don't.
__________________
_________________________________
Skal!
Den Faaborg Bryggeri

Quote:
Originally Posted by davekippen View Post
Open log Fermenting and gas-can secondary?? I am planning my next brew right now!!

 
Reply With Quote
Old 06-28-2012, 02:49 PM   #19
Sixmilecross
Recipes 
 
Apr 2012
New York, NY
Posts: 72
Liked 6 Times on 6 Posts


You could devise a mandatory quiz at the end of registration that forces people to read the FAQ section before allowing them to post a new thread. Maybe throw in a "This is how you execute a search" demo just to be safe
__________________
"...who spends himself in a worthy cause; who at the best knows in the end the triumph of high achievement, and who at the worst if he fails, at least fails while daring greatly, so that his place shall never be with those cold and timid souls who neither know victory nor defeat."

homebrewdad Likes This 
Reply With Quote
Old 06-28-2012, 02:53 PM   #20
evrose
Recipes 
 
Jun 2012
Carlsbad, CA
Posts: 840
Liked 304 Times on 160 Posts


Quote:
Originally Posted by tre9er View Post
I guess I'm an exaggerationist (new word?). When my kids get a tiny cut I'm always like, "Let's go to the hospital. You know, they MIGHT have to cut it off at this point."
Yeah, okay, I do this to my significantly younger cousins... which really freaks them out, because, well, I'm a doctor and they think I'm serious.




 
Reply With Quote
Reply
Thread Tools



Forum Jump