Performing a diacetyl rest after lagering - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Fermentation & Yeast > Performing a diacetyl rest after lagering

Reply
 
Thread Tools
Old 06-26-2012, 03:10 PM   #1
hamaien
Recipes 
 
Feb 2012
Wilmington, North Carolina
Posts: 29
Liked 1 Times on 1 Posts



After 5-6 weeks in secondary, my Oktoberfest still has a prominent diacetyl flavor. I did a diacetyl rest at 68 degrees for 3 days at the end of primary but I guess it wasn't long enough since this beer tastes like malty popcorn right now. I've read that you can do a diacetyl rest after fermentation by pitching a large amount of healthy yeast and raising the temperature into the 70-75 degree range. Has anyone done this with good results? Will I need to go through an additional lagering phase if I repitch? I'm not competing so I don't care too much about clarity.



 
Reply With Quote
Old 06-27-2012, 12:15 PM   #2
hamaien
Recipes 
 
Feb 2012
Wilmington, North Carolina
Posts: 29
Liked 1 Times on 1 Posts


I did some research and decided to krausen the beer (like in this link: http://www.byo.com/stories/technique...ing-techniques ). I made up some wort (about 15% of the total volume of the batch), hopped it to match the IBUs of the beer, and pitched my yeast last night. When it gets to high krausen later today I'm going to dump it in and see what happens.



 
Reply With Quote
Old 06-27-2012, 10:32 PM   #3
daksin
HBT_SUPPORTER.png
 
daksin's Avatar
Recipes 
 
Aug 2011
San Diego, CA
Posts: 4,607
Liked 351 Times on 305 Posts


I've had great luck krausening my beer. I made a butter bomb ESB with 1968 that I krausened and that beer scored very well in a competition just the next week. I actually just made an ordinary bitter with a similar grain bill but lower gravity, and then took a few quarts of that out to krausen the ESB.
__________________
I can't be arsed to keep up this list of what's in the fermenters, but hey, check out the cool brewery I own!

twitter.com/2kidsbrewing .. facebook.com/2kidsbrewing .. 2kidsbrewing.com

 
Reply With Quote
Old 06-27-2012, 10:48 PM   #4
generalzod4791
Recipes 
 
May 2012
Coon Rapids, Minnesota
Posts: 21
Liked 2 Times on 1 Posts


Me does the same thing but to save time use a neutral flavored dry yeast.

 
Reply With Quote
Old 06-28-2012, 12:20 AM   #5
AviatorTroy
Recipes 
 
Apr 2010
Cincinnati
Posts: 85
Liked 1 Times on 1 Posts


That Kruesening technique sounds like it might work but in the future waiting until the end of primary is too late. I have heard the rule of thumb is to go with the d-rest when your SG has dropped 2/3 of the way from OG to FG. At any rate I usually do a d-rest at 1.020 or after 1 week of primary, and I have never had a problem with diactyl so it must work OK I guess.

 
Reply With Quote
Old 06-28-2012, 12:36 PM   #6
hamaien
Recipes 
 
Feb 2012
Wilmington, North Carolina
Posts: 29
Liked 1 Times on 1 Posts


I think the problem was the yeast I used. I went to a different LHBS than I usually go to and he suggested using 2124 Bohemian Lager instead of Oktoberfest (it was the only lager strain he had in stock) and I found out after the fact that this yeast is notorious for making movie popcorn beer. I'll definitely be more discerning with my next lager attempt.

What yeasts have you used that had little to no diacetyl production? I think my next lager will be a hoppy American pils and I definitely don't want butter in that beer.

 
Reply With Quote
Old 06-28-2012, 01:57 PM   #7

http://www.homebrewtalk.com/f14/will-work-205761/
__________________
2012 Canadian Brewer of the Year
2013 Canadian Brewer of the Year
2015 Canadian Brewer of the Year

@evilgoatbrewing

 
Reply With Quote
Old 06-28-2012, 05:09 PM   #8
generalzod4791
Recipes 
 
May 2012
Coon Rapids, Minnesota
Posts: 21
Liked 2 Times on 1 Posts


Quote:
Originally Posted by AviatorTroy View Post
That Kruesening technique sounds like it might work but in the future waiting until the end of primary is too late. I have heard the rule of thumb is to go with the d-rest when your SG has dropped 2/3 of the way from OG to FG. At any rate I usually do a d-rest at 1.020 or after 1 week of primary, and I have never had a problem with diactyl so it must work OK I guess.
I've had it work when I used to secondary ferment. Also I have had traces of diacetyl after reaching my FG which was cleaned up by letting it sleep on the yeast or adding more yeastie-beasties. One could also add a small amount of fermentables when kruesening.

 
Reply With Quote
Old 06-28-2012, 06:24 PM   #9
AviatorTroy
Recipes 
 
Apr 2010
Cincinnati
Posts: 85
Liked 1 Times on 1 Posts


Oh yea, forgot to mention I usually let it go a couple weeks after fermentation is complete before I rack and cold crash to lagering temp. Seems like leaving it sit on the layer of yeast does help clean it up. I am sure as heck no expert, just throwing out there what works for me.

And I am going to try kreusening my next lager as well, just because I never have before and I like to experiment.

 
Reply With Quote
Old 07-02-2012, 12:42 PM   #10
hamaien
Recipes 
 
Feb 2012
Wilmington, North Carolina
Posts: 29
Liked 1 Times on 1 Posts


Update on this: Krausening the beer worked really well. I added actively fermenting wort (about 17% of the total volume) and let it sit on the yeast cake at room temperature for a few days. When I pulled a sample yesterday there was no detectable level of diacetyl in the flavor or aroma. I put it back in the fermentation chamber and I'm going to lower the temperature to 50ish and let it drop clear again and bottle it. Thanks for your help, everyone!



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Diacetyl Test and Diacetyl Rest Length ayoungrad Fermentation & Yeast 42 05-21-2011 09:57 PM
How soon to diacetyl rest ? wired247 Fermentation & Yeast 4 01-25-2011 01:50 PM
Too late for Diacetyl rest after lagering? TimBrewz Fermentation & Yeast 7 12-23-2010 04:38 PM
Diacetyl Rest asdtexas Fermentation & Yeast 1 08-26-2010 10:11 PM
Diacetyl Rest/Lagering Procedure jar1087 Fermentation & Yeast 6 10-09-2009 05:05 AM


Forum Jump