Fermenting/KRAUSEN stopped after 30 hours? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Fermenting/KRAUSEN stopped after 30 hours?

Reply
 
Thread Tools
Old 06-23-2012, 03:32 PM   #1
CBUDGO
Recipes 
 
Jun 2012
Mahshfield, MA
Posts: 84
Liked 2 Times on 2 Posts



No airlock activity, swirling of contents stopped. maybe 48 hrs max is that ok?

Brewed 7 days ago from a truebrew IPA kit. It took 3 to 4 days for the first bubbles to show. Then it really cranked for a while with 2 inches of foam and it was swimming in there. Temps in the ale range for the most part, swamp cooler.

Ideas? Is this ok?

Thanks all.

WorryWort.



 
Reply With Quote
Old 06-23-2012, 03:35 PM   #2
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
 
Revvy's Avatar
Recipes 
 
Dec 2007
"Detroitish" Michigan
Posts: 40,921
Liked 3180 Times on 1881 Posts


Bubble activity is NOT a way to judge what a fermentation is doing. All an airlock tells you is whether your airlock is bubbling or not, it's a VENT a VALVE to release excess co2. NOT a fermentation gauge.

You wanna know what your beer is doing (which is probably fermenting just fine) Take a HYDROMETER READING.

Then you won't need to worry...you'll KNOW what your beer is doing.


__________________
Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

 
Reply With Quote
Old 06-23-2012, 04:03 PM   #3
CBUDGO
Recipes 
 
Jun 2012
Mahshfield, MA
Posts: 84
Liked 2 Times on 2 Posts


Quote:
Originally Posted by Revvy View Post
Bubble activity is NOT a way to judge what a fermentation is doing. All an airlock tells you is whether your airlock is bubbling or not, it's a VENT a VALVE to release excess co2. NOT a fermentation gauge.

You wanna know what your beer is doing (which is probably fermenting just fine) Take a HYDROMETER READING.

Then you won't need to worry...you'll KNOW what your beer is doing.
Thanks Revvy, I couldn't get an OG for a few reasons, so I don't know what to compare to.

 
Reply With Quote
Old 06-23-2012, 04:14 PM   #4
Revvy
Post Hoc Ergo Propter Hoc
HBT_LIFETIMESUPPORTER.png
 
Revvy's Avatar
Recipes 
 
Dec 2007
"Detroitish" Michigan
Posts: 40,921
Liked 3180 Times on 1881 Posts


Your recipe....Either it will tell you what your gravity should have been or typing the recipe into any brewing calculator will tell you what it was, then if the gravity reading is lower that that now, you know you have fermentation..

Or take a gravity reading, and another in 2 days, if it's the same it's done, if it's lower you have fermentation.....
__________________
Like my snazzy new avatar? Get Sons of Zymurgy swag, here, and brew with the best.

Revvy's one of the cool reverends. He has a Harley and a t-shirt that says on the back "If you can read this, the bitch was Raptured. - Madman

I gotta tell ya, just between us girls, that Revvy is HOT. Very tall, gorgeous grey hair and a terrific smile. He's very good looking in person, with a charismatic personality... he drives like a ****ing maniac! - YooperBrew

CBUDGO Likes This 
Reply With Quote
Old 06-23-2012, 04:18 PM   #5
CBUDGO
Recipes 
 
Jun 2012
Mahshfield, MA
Posts: 84
Liked 2 Times on 2 Posts


Thanks Revvy. 1st batCh to worried to think logically. Haha.

 
Reply With Quote
Old 06-23-2012, 04:31 PM   #6
Creaturesofbrewery
Recipes 
 
Jun 2012
Posts: 13

Hi guys, sorry to but in can you take a gravity reading when ever or does this have a knock on effect.

 
Reply With Quote
Old 06-23-2012, 06:30 PM   #7
CBUDGO
Recipes 
 
Jun 2012
Mahshfield, MA
Posts: 84
Liked 2 Times on 2 Posts


Then which trying to figure out my reading i saw a video that said don't return the sample!! Am I screwed?!? I hit everything with starsan including the sample jar/tube. And gave the inside a rinse with tap water and shook it empty to get a more accurate reading.
Reading was 1.019 in a 72 degree sample. BTW.



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Airlock stopped in less than 24 hours murat Beginners Beer Brewing Forum 12 05-19-2010 12:27 AM
wow, my beer stopped bubbling after less than 24 hours jigidyjim Beginners Beer Brewing Forum 3 04-27-2010 02:17 AM
Stopped bubbling within the first 24 hours. leapinglords Beginners Beer Brewing Forum 9 09-23-2009 01:29 AM
Bubbling stopped after ~40 hours...should I look inside? arover Beginners Beer Brewing Forum 11 03-05-2009 01:24 AM


Forum Jump