Parti-Gyle Gravities - Home Brew Forums
Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Parti-Gyle Gravities

Reply
 
Thread Tools
Old 06-19-2012, 09:39 PM   #1
hoptualBrew
Recipes 
 
Sep 2011
Fort Myers, Florida
Posts: 122
Liked 10 Times on 9 Posts



I am getting into the method & planning to do a English Barleywine & English IPA parti-gyle method the first week of July. I am writing out my recipes and playing with gravities. Just making sure my logic (and calculations) are on par. I average a 65% efficiency with batch sparging.

English Barleywine - 1st runnings (mash temp 156 F)

18# Maris Otter (38 x 18 / 5) = 136.8
4# Mild Malt (37 x 4 / 5) = 29.6
2# Caramalt (34 x 2 / 5) = 13.6

180 x .65 = preboil gravity 1.117


English IPA - 2nd runnings (mash temp 154 F)

180 (potential) - 117 (1st runnings) = 63 (remaining) x .65 = 40.95 = 1.041 attribute from original mash
add 3# Maris Otter (38 x 3 / 5) = 22.8 x .65 = 14.8
add 2# Honey Malt (37 x 2 / 5) = 14.8 x .65 = 9.62
add 2# Flaked Oat (37 x 2 / 5) = 14.8 x .65 = 9.62

1.041 + 0.014 + 0.010 + 0.010 = 1.075 expected preboil gravity

Thanks in advance for input!

 
Reply With Quote
Old 06-19-2012, 10:21 PM   #2
david_42
 
david_42's Avatar
Recipes 
 
Oct 2005
Willamina & Oak Grove, Oregon, USA
Posts: 25,593
Liked 151 Times on 142 Posts


I'm not following your calculation. The total potential is 180 points. If your efficiency is 65%, you'll get 117 total. Why do you think (re)mashing (without many conversion enzymes) will raise your efficiency to almost 88%?

PS 2 lbs of Honey Malt in an IPA will be strange. Have you done this before?
__________________
Remember one unassailable statistic, as explained by the late, great George Carlin: "Just think of how stupid the average person is, and then realize half of them are even stupider!"

"I would like to die on Mars, just not on impact." Elon Musk

 
Reply With Quote
Old 06-19-2012, 10:45 PM   #3
hoptualBrew
Recipes 
 
Sep 2011
Fort Myers, Florida
Posts: 122
Liked 10 Times on 9 Posts


1.041 from original grain bill on 2nd runnings - was planning to no sparge 1st runnings, and just remash at 154 for 60 mins with new 7# of grain. New 7# of grain to contribute 34 pts. Am I off? How would you estimate 2nd runnings gravity with addition of new malts?

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Parti-Gyle MikeDelta1 All Grain & Partial Mash Brewing 7 01-09-2012 05:09 AM
Second Parti-gyle northernlad All Grain & Partial Mash Brewing 3 12-18-2010 05:26 PM
Parti-Gyle This! DPlan00 All Grain & Partial Mash Brewing 3 11-04-2010 05:18 AM
First Parti-gyle northernlad All Grain & Partial Mash Brewing 13 09-20-2010 12:14 AM
Parti Gyle help???? pava All Grain & Partial Mash Brewing 10 12-18-2008 01:45 PM


Forum Jump