Cornelius Insulation Jacket - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > Cornelius Insulation Jacket

Reply
 
Thread Tools
Old 07-09-2007, 05:08 PM   #1
digdan
 
digdan's Avatar
Recipes 
 
Aug 2005
Pasadena, CA
Posts: 494
Liked 5 Times on 5 Posts



Needed :
closed cell camping padding
scissors
duct tape
keg for measuring


Summer heat is apon me and I've found a cheap and easy way to insulate korny kegs when in transit.

Grab a single roll of the blue (color don't matter) camping padding. The very thick stuff. It should be closed-cell camping padding.

Put your keg on the corner and trace the round base of the keg. Cut out marked circle.

From the uncut side of the padding, wrap it around the keg until it overlaps itself and mark that from end to end and cut it.

Now simply attach all parts with duct tape. I duct taped my whole jacket just because they tend to come apart unless enforced with lots of tape.



 
Reply With Quote
Old 07-09-2007, 10:17 PM   #2
enfox
Recipes 
 
Sep 2006
Posts: 32

You have any idea of the insulation rating of one of those pads?



 
Reply With Quote
Old 07-09-2007, 10:20 PM   #3
EdWort
HBT_LIFETIMESUPPORTER.png
 
EdWort's Avatar
Recipes 
 
Jul 2006
Bee Cave, Texas
Posts: 11,914
Liked 336 Times on 169 Posts


Ok, let's see pics. Great idea, BTW!

MUST HAVE PICS IN DIY SECTION

 
Reply With Quote
Old 07-10-2007, 05:34 AM   #4
Orfy
For the love of beer!
HBT_LIFETIMESUPPORTER.png
 
Orfy's Avatar
Recipes 
 
Sep 2005
Cheshire, England
Posts: 11,732
Liked 94 Times on 62 Posts


Quote:
Originally Posted by EdWort
Ok, let's see pics. Great idea, BTW!

MUST HAVE PICS IN DIY SECTION
IT'S THE LAW!
__________________
GET THE GOBLIN
Have a beer on me.

 
Reply With Quote
Old 07-10-2007, 04:41 PM   #5
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,148
Liked 1622 Times on 1050 Posts


Very nice, but I'm sure there's a better solution than to use duct tape. I'm thinking that contact cement would be the ticket.
__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 07-11-2007, 02:27 AM   #6
digdan
 
digdan's Avatar
Recipes 
 
Aug 2005
Pasadena, CA
Posts: 494
Liked 5 Times on 5 Posts




That is the blue camping padding I was talking about. Its an amazing insulator, but it does tend to want to keep its shape (i.e. it hates bending out of its original shape). The reason you see two holes is becuase the first base I cut was too small. You want it perfectly sized.



That the jacket around my korny keg. I originally only had three strips of duct tape holding it together, but it wasn't enough so I went balls to the wall and used two types of duct tape to keep it inplace. It keeps very very well, i would say better than a cooler.

As for the duct tape part. I would actually say lacing it up with a string like a football or a shoe would be the best solution, and then using expanding insulation foam, then a knife to cut out the extra foam. That would create a perfect "jacket". Maybe even reflective or white paint on the outside to furthur insulate it.

incase you are wondering, those bright round stickers are quick indicators of what side the gas is on. I go through so much beer its a waste of time to try to read the small etched words on these kegs. I also number my kegs so I can catalog what beer is where.

I'll do step-by-step pictures on my next creation.

 
Reply With Quote
Old 07-11-2007, 02:42 AM   #7
digdan
 
digdan's Avatar
Recipes 
 
Aug 2005
Pasadena, CA
Posts: 494
Liked 5 Times on 5 Posts


Almost forgot. For ductaping the top of the tube you need to cut an 2 inch slit every inch in the duct tape. This makes it so it folds over nicley as part of the circumferance of the tube. Since straight duct tape doesn't fold well as a round piece (it will, but it will wrinkle horribly).

 
Reply With Quote
Old 07-11-2007, 03:24 AM   #8
homebrewer_99
 
homebrewer_99's Avatar
Recipes 
 
Feb 2005
Atkinson (near the Quad Cities), IL
Posts: 17,792
Liked 131 Times on 98 Posts


OK. I'm all for innovative and imagination, etc., but how tight is it on the corny?

The reason I'm asking is I presume you would want to get the keg cold before sliding it inside the sleeve? Right?

BTW, on top of the corny (on the rubber) are indentations indicating which side is "IN" for gas... This way you can connect the hoses without seeing which side is "in" and which is "out". It also helps when someone can't remember which post goes where.

I have those paper tags with the string tied to my handles. I write on them the batch number, the name of the brew, the date brewed, the date kegged, the OG, FG, alcohol % ABW and ABV, and any other notes...all on one side. Much more room than a dot.
__________________
HB Bill


 
Reply With Quote
Old 07-11-2007, 05:09 AM   #9
digdan
 
digdan's Avatar
Recipes 
 
Aug 2005
Pasadena, CA
Posts: 494
Liked 5 Times on 5 Posts


Nah, I'm that lazy. So lazy that I don't want to even read the tags. I point the bright dots to the front and connect my CO2 to it and pressurize it ot my preset 15psi

For furthur information I collect from my brewers journal, which is not even closley updated as my online version which is


Down


There

Saying My Brews in Progress

V

 
Reply With Quote
Old 07-11-2007, 11:38 AM   #10
homebrewer_99
 
homebrewer_99's Avatar
Recipes 
 
Feb 2005
Atkinson (near the Quad Cities), IL
Posts: 17,792
Liked 131 Times on 98 Posts


That's a nice site/link.


__________________
HB Bill

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
40 gallon SS steam jacket kettle South Puget Sound area Pabst Blue Robot For Sale 3 10-01-2009 08:45 PM
MLT insulation Jim Karr Kettles, Mash Tuns & Hot Liquor Tanks 1 08-01-2008 04:43 PM
My yellow jacket stout Bytor1100 Recipes/Ingredients 4 07-26-2008 06:13 AM
Jacket Conical Pictures! Brewpastor Fermenters 22 06-25-2008 11:09 PM


Forum Jump