Corking - Home Brew Forums

Register Now!
Home Brew Forums > Wine, Mead, Cider, Sake & Soda > Mead Forum > Corking

Reply
 
Thread Tools
Old 06-11-2012, 08:34 PM   #1
Taise
Recipes 
 
Mar 2012
Wichita, KS
Posts: 48
Liked 1 Times on 1 Posts



I just bottled my first batch of JAOM so I can see the difference in 6 months to a year. The problem I have is that the hand corker my wife got me left about 1/8 ro 3/16th of an inch of cork above the top of the bottle and left a deep dent in the cork where it did go all the way in. Is it a problem with the corker or am I missing something in the process.

Corking is one of the few things I haven't found a lot of info on.

It looks a lot like this one on Amazon.
http://www.amazon.com/gp/product/B00...pf_rd_i=507846

 
Reply With Quote
Old 06-11-2012, 09:57 PM   #2
ExoticMeadMaker
Recipes 
 
Apr 2011
Plano, TX
Posts: 131
Liked 5 Times on 4 Posts


I just cut a cork into 3rds and load a slice on top of the cork going in the bottle. This prevents the dimple and pushes the cork further into the bottle.
__________________
does anyone else find themselves sitting, starring at their mead in process?

 
Reply With Quote
Old 06-11-2012, 10:03 PM   #3
brewingmeister
Recipes 
 
Apr 2009
middle of nowhere
Posts: 1,910
Liked 183 Times on 136 Posts


Adjust it to set the cork deeper. (turn the nut on top)
__________________
............Alright Brain, you don't like me, and I don't like you. But lets just do this, and I can get back to killing you with beer......~Homer

 
Reply With Quote
Old 06-12-2012, 04:43 PM   #4
TheBrewingMedic
 
TheBrewingMedic's Avatar
Recipes 
 
Dec 2011
Stanfordville, NY
Posts: 651
Liked 27 Times on 27 Posts


Quote:
Originally Posted by brewingmeister View Post
Adjust it to set the cork deeper. (turn the nut on top)
Some of the two hand corkers out there now aren't adjustable, stupid design really, and most of them have a tendency to leave too much cork sticking up, I've heard of some people being succesful by just putting pressure on the top of the corker and them going in all the way.




Quote:
Originally Posted by ExoticMeadMaker View Post
I just cut a cork into 3rds and load a slice on top of the cork going in the bottle. This prevents the dimple and pushes the cork further into the bottle.
This sounds like a really good idea, making a spacer out of another piece of cork.
__________________
Watch and Listen to your Mead....It will tell you when the next step is.

 
Reply With Quote
Old 06-12-2012, 04:59 PM   #5
amandabab
Recipes 
 
Mar 2012
spokane, wa
Posts: 1,971
Liked 241 Times on 183 Posts


some lever corkers cant be adjusted.
It your using a lever corker, just give up and use short #8 corks.

Cork it, let it sit for 3 days to expand in the bottle neck, then steam a capsule on it then store it, you can easily get 2-3 years with a #8.

 
Reply With Quote
Old 06-12-2012, 05:25 PM   #6
fatbloke
 
fatbloke's Avatar
Recipes 
 
Dec 2006
UK - South Coast.
Posts: 2,698
Liked 182 Times on 167 Posts


Depends on the bottle type, but standard Bordeaux and Burgundy type bottles are easily over filled, so when corked the bung will go in, but the back pressure created in the airspace below the cork will push it out a little until the back pressure is overcome by friction.

The dimple issue ? I use a small coin placed on top of the cork before pressing in helps some, and then either a plastic heat shrink seal or cork/bottle sealing wax usually hides any dimple that may remain.
__________________
"What the large print giveth, the small print taketh away". Tom Waits.

Oh, and here's some blog stuff!

 
Reply With Quote
Old 06-12-2012, 06:35 PM   #7
zeg
Recipes 
 
Jan 2012
West Lafayette, IN
Posts: 1,216
Liked 129 Times on 111 Posts


I just bottled my first batch of mead using a cheap ($8 I think) plunger corker with a $2 rubber mallet and it worked quite well. It set the cork about 1/8 inch below the rim of the bottle. If I was careful, I could get it to be flush but I decided I didn't care and just set most of them in where it went.

It was a bit of a clatter pounding the corks in, but kind of fun.

 
Reply With Quote
Old 06-12-2012, 11:09 PM   #8
amandabab
Recipes 
 
Mar 2012
spokane, wa
Posts: 1,971
Liked 241 Times on 183 Posts


Quote:
Originally Posted by zeg View Post
It set the cork about 1/8 inch below the rim of the bottle. If I was careful, I could get it to be flush but I decided I didn't care and just set most of them in where it went.
a little below the rim is where you want them.

 
Reply With Quote
Old 06-13-2012, 01:31 AM   #9
zeg
Recipes 
 
Jan 2012
West Lafayette, IN
Posts: 1,216
Liked 129 Times on 111 Posts


Yeah, I don't object to their being sunk, it's just a bit deeper than I'd like. On a few I carefully set them to my preferred depth, then decided it was far too much trouble and just hammered them all the way down.

 
Reply With Quote
Old 06-13-2012, 12:51 PM   #10
huesmann
Recipes 
 
Mar 2011
Kensington, MD
Posts: 756
Liked 22 Times on 22 Posts


Back before I got a lever-operated floor corker, when my hand corker wouldn't push the corks in quite enough, I'd get a thick washer of a smaller diameter than the bottle, turn the bottle upside down on the washer, and push down on the bottle. That would usually push the cork in far enough.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Question about Bottling or Corking badducky Mead Forum 13 04-09-2012 10:21 PM
capping or corking chip82 Mead Forum 3 09-27-2010 07:48 PM
Corking Sparkling mead BierSnob Mead Forum 2 02-22-2010 11:03 PM
Corking DuffmanAK Mead Forum 6 12-23-2008 08:16 PM
Bottling/Corking gpogo Mead Forum 2 05-12-2008 04:09 AM


Forum Jump