WTB: Custom 1/2" SS tubing watering wand - Home Brew Forums

Register Now!
Home Brew Forums > Home Brew Market > For Sale > WTB: Custom 1/2" SS tubing watering wand

Thread Tools
Old 05-29-2012, 01:38 AM   #1
Feb 2012
manchester, nh
Posts: 85
iTrader: (0)
Liked 8 Times on 8 Posts

I'm looking for a "hook" so I can hang a recirculating line into the top of by brew pot. I want a section of 1/2" tubing about 18" long with a shepard's crook on the end so it will hang on the edge of the pot. The 180 curve at the top of the wand should be as tight a radius as possible.

I'd love 1/2" stainless NPT threads on the bottom end but if not possible I can take care of that myself with a swagelock. The top I plan to use a piece of 1/2" silcone tubing + clamp to lay down on top of the mash.

Let me know if you can help me out. Thanks.

Reply With Quote
Old 05-29-2012, 02:49 AM   #2
Demon's Avatar
Mar 2008
Willowbrook, IL
Posts: 974
iTrader: (0)
Liked 113 Times on 72 Posts

Check out stainlessbrewing.com

They do custom bent coils, this should be easy for them to do.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
50ft 304 SS 1/2" 0.020" Wall Tubing ahave For Sale 1 04-20-2012 08:09 PM
Silicone tubing 1/2" ID 3/4" OD fortydegnorth For Sale 16 02-21-2012 12:01 PM
1/2" ID 3/4" OD Silicone Tubing jcojr72 For Sale 60 02-15-2012 05:20 AM
WTB - Silicone tubing 1/2" ID & 3/8" ID Mike_A For Sale 1 03-09-2011 06:42 PM
ebay find: 5/8" ID x 7/8" OD silicone tubing 0.80/ft Mike_A For Sale 2 02-14-2011 02:24 PM

Forum Jump