Question regarding corny keg quick disconnect setup - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > Question regarding corny keg quick disconnect setup

Thread Tools
Old 05-24-2012, 05:34 PM   #1
Aug 2010
, Nova Scotia
Posts: 11

In a dual-keg kegerator setup (ball lock pepsi), does it make sense to use Ball Lock Disconnects (Pair) 1/4 MFL or Ball Lock Disconnects - Barbed?

I'm just trying to go through this and figure out what makes better sense, since the gas lines don't have to be cleaned like the beer lines do after each keg, etc...can someone help me with the best setup and logistics on this? I know it sounds stupid, but i'm going to be ordering the parts I need and want to have it worked out before doing so (what I need, how it will be setup, etc)


Reply With Quote
Old 05-24-2012, 06:32 PM   #2
BigB's Avatar
Dec 2009
Shelby Twp, MI
Posts: 1,755
Liked 45 Times on 39 Posts

I like the MFL because if you ever damage one or decide to switch one out for a pin lock or for any reason, it is easy to change without pulling out the utility knife.
I love the sound of an airlock bubbling in the morning. It sounds like.....VICTORY.

Originally Posted by TxBrew
It's now degenerating into nu uh and uh huhs and it no longer serves a point.

Reply With Quote
Old 05-25-2012, 06:45 AM   #3
bucfanmike's Avatar
Apr 2010
Posts: 1,023
Liked 27 Times on 24 Posts

mfl gives you flexibility. I use all mfl because i have both ball and pin lock kegs.
Mike in Duluth

Currently on Tap
1. Hefeweizen
2. BM Centennial Blonde
3. LHMS Clone

Next on Tap-Denny Conn Rye IPA
Kegged and aging Ed Worts Apfelwine, Denny Conn BVIP
Fermenters -

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Quick Disconnect Question thenatibrewer Kettles, Mash Tuns & Hot Liquor Tanks 23 07-09-2011 04:41 AM
3/8" Quick Disconnect swanwick Kettles, Mash Tuns & Hot Liquor Tanks 0 05-27-2011 01:04 PM
Quick Disconnect question Runyanka Kettles, Mash Tuns & Hot Liquor Tanks 4 12-27-2010 04:17 PM
BrewTroller Pressure Disconnect Setup jcdillin Brew Stands 0 02-25-2010 06:37 PM
co2 quick disconnect? nathan Kegerators & Keezers 1 01-18-2009 12:27 AM

Forum Jump