Originally Posted by mors
I'm looking to convert a keg into a mash tun. When looking at your false bottoms I notice you have some with stands and some without. Which do you recommend stand or no stand? Thanks.
Well I have been selling a 16.99 stand that works with the 15" false bottom and does not raise the false bottom any. It sits under the false bottom in the center. I don't have it on the site yet as we started making these for the guys doing massive grain bills and using a RIMS system where your pulling real hard on the grain bed. I am having Victor add this to the site in the next day or 2
Most people (about 98%) dont require a stand and have killer luck. I also like the Hop Blocker Mini @ (1.5" tall) as a stand because it adds yet 1 more way to block grain from getting in the dip tube. I use a mini in my system as a stand myself and love it, but I do huge 12 gallon batches and push my system to the max!
This is the Mini
Originally Posted by wpshadowens
It is Dan, both the false bottom (with stands) and the pump. They sell 2 pumps, 1/100 hp & 1/25 hp. They suggested the 1/100 for use with my mash tun but I went with the bigger is better logic and got the 1/25 instead. The club's Pico system has the same false bottom and I haven't run into or heard of the same collapsing problem. Not sure what pumps the club's system has though. Would really like to see Jaybird's recommendation / thoughts about this.
Well of you know I am going to recommend the Jaybird 15" over any others out there...
If your worried about it collapsing get a stand for the keggle and 15" or buy a mini, cant go wrong there.
Originally Posted by dgmarquez
Which is the size for the 10 gal. Igloo? If I have my own weldless bulkhead, what else wouldI need? A diptube? Thanks in advance!
All 10 gallon coolers measure different. What you need to do is when you order the 10 gallon cooler kit is measure the bottom of your cooler 2" above the bottom and get me that measurement, I will custom cut the false bottom to fit your cooler. No you really don't need a diptube, the false bottom will sit above the drain.