Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > Electrical Help
Reply
 
Thread Tools
Old 05-15-2012, 04:02 AM   #1
Hoppylikerabbits
Feedback Score: 0 reviews
Recipes 
 
Join Date: Nov 2010
Location: Clovis, New Mexico
Posts: 162
Liked 5 Times on 5 Posts
Likes Given: 3

Default Electrical Help

So the other day I had my Central Air unit replaced and what do you know.. there happened to be a 220v Motor in the fan.. So i took it out.. now here's the delema..
I'm able to get the motor to run on 110v using the black and white wire. However it seems a bit slow.. 1075rpm @ 20% (hoping that is correct). How would i wire this up to actual 220v (dryer outlet) or would this be alright as it sits to run my mill? here is the attached wiring diagram. I'm able to work with 110v all day every day but i cant grasp the 220v. Unless it would be the same connection to 220v.....
I also know i can put a SPDT switch in-between the yellow and purple wires for CCW and CW rotation.


Click image for larger version

Name:	photo1.jpg
Views:	109
Size:	64.0 KB
ID:	61407   Click image for larger version

Name:	photo.jpg
Views:	112
Size:	54.3 KB
ID:	61408  
Hoppylikerabbits is offline
 
Reply With Quote
Old 05-15-2012, 10:56 AM   #2
Junkster
Feedback Score: 0 reviews
Recipes 
 
Join Date: Feb 2011
Location: North Central, Ohio
Posts: 509
Liked 31 Times on 22 Posts
Likes Given: 3

Default

One leg of the 230 goes to COM, the other leg goes to HI (1075 RPM is the HI speed) no neutral connection, ground to GRN/YEL. I wouldn't run very long on 120V except for a quick test. The switch you need for reversing is a DPDT. The motor probably could be wired to a 240V, 4-Wire dryer outlet but I think they are usually 30A, so lower amperage protection between the outlet & motor would probably be advised, but I don't know the code - maybe an electrician will chime in here.....
Junkster is offline
 
Reply With Quote
Old 05-15-2012, 11:34 AM   #3
passedpawn
Waste Allocation Load Lifter - Earth Class
HBT_MODERATOR.png
Feedback Score: 1 reviews
 
passedpawn's Avatar
Recipes 
 
Join Date: Apr 2009
Location: ☼ Clearwater, FL ☼
Posts: 22,380
Liked 5013 Times on 2989 Posts
Likes Given: 4180

Default

Quote:
Originally Posted by Junkster View Post
One leg of the 230 goes to COM, the other leg goes to HI (1075 RPM is the HI speed) no neutral connection, ground to GRN/YEL. I wouldn't run very long on 120V except for a quick test. The switch you need for reversing is a DPDT. The motor probably could be wired to a 240V, 4-Wire dryer outlet but I think they are usually 30A, so lower amperage protection between the outlet & motor would probably be advised, but I don't know the code - maybe an electrician will chime in here.....
Excellent answer!

Maybe SP4T for the speed, to also include OFF.
__________________
- Andrew
passedpawn is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Best way to run electrical Douglefish Brew Stands 24 06-15-2010 10:11 PM
where to buy electrical components? Brewing Clamper Brew Stands 10 04-23-2010 03:43 PM
electrical help needed rod Brew Stands 15 02-17-2010 08:06 PM
Electrical Engineers oldschool Brew Stands 10 01-27-2010 02:43 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS