10 psi vs 15 psi LP Regulator - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > 10 psi vs 15 psi LP Regulator

Reply
 
Thread Tools
Old 05-11-2012, 06:16 PM   #1
janzik
 
janzik's Avatar
Recipes 
 
Sep 2007
Old Bridge, NJ
Posts: 531
Liked 1 Times on 1 Posts



I ordered a pair of BG-14's from Agrisupply and ordered 2 regulator and hose setups. The website says the regulators are 0-15 PSI, but when I got them, there was a sticker on the red knobs that said "1-10PSI". I called Agrisupply and they were going to have someone call me back. I tried one of the setups and the burner runs like a rocket ship, but am I missing out by not having that extra 5 PSI? They're going to be used on keggles and 10-12 gallon batches.

Regulator:
http://www.agrisupply.com/lp-gas-adj...78/cn/5400007/
__________________
-Joe

 
Reply With Quote
Old 05-11-2012, 09:10 PM   #2
OneHoppyGuy
Recipes 
 
Nov 2009
Concord, CA
Posts: 1,666
Liked 44 Times on 36 Posts


you're fine

 
Reply With Quote
Old 05-12-2012, 01:03 PM   #3
janzik
 
janzik's Avatar
Recipes 
 
Sep 2007
Old Bridge, NJ
Posts: 531
Liked 1 Times on 1 Posts


I know it will work. I just want it to work well. I don't want to wait an hour for 8-10 gallons of strike water to heat up or a 14 gallon preboil.

After talking in the chat room it was suggested that 10 or 15 psi will work, but will suck for full keggle boils. Like I said above, I'm not interested in waiting a long time. So I will return these regs and pick up some 30psi ones.
__________________
-Joe

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gas regulator cino101 Equipment/Sanitation 5 10-26-2011 04:05 AM
LP Regulator Gone Bad? GoldMiner Equipment/Sanitation 3 09-27-2010 10:04 PM
Will this Regulator fit? StankAle Equipment/Sanitation 9 04-03-2008 09:40 PM
CO2 Regulator? Chris_Dog Equipment/Sanitation 3 02-14-2008 07:19 PM
Regulator Q hammer one Equipment/Sanitation 5 02-14-2008 05:47 AM


Forum Jump