Hows it look - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Hows it look
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 05-10-2012, 03:15 PM   #1
CliffMongoloid
Recipes 
 
Jan 2012
Prompton, pa
Posts: 3,181
Liked 578 Times on 425 Posts



im look through left over supplies and random things i have on hand. I wanna try to do a baltic porter. Just threw this recipe together quick to see what you think. Any input is appreciated

3.3lbs Dark Malt Extract Syrup
2lbs Dark Dry Malt Extract
12oz American Crystal 40L
12oz Turbinado sugar
8oz Malto-Dextrin
6oz Chocolate Malt
6oz Cara-Pils/Dextrine

60 mins 1oz First Gold
Yeast- Muntons Dry Yeast

OG- 1.060
FG- 1.016
IBUS- 26
ABV 5.9



 
Reply With Quote
Old 05-10-2012, 04:38 PM   #2
homebrewhaha
Recipes 
 
Oct 2008
Boston, MA
Posts: 218
Liked 13 Times on 12 Posts


Just a guess but this might end up pretty dark. Might want to look at your SRM. I guess it's a porter so that's okay, but it seems like there's a general consensus around here that it's better to start with lighter extracts and use specialty malts, etc. to then bring the beer up to where you want it in terms of color & flavor. This method gives you a lot more control since you don't really know what goes into the LME and DME that you might be doubling up in your specialty grains.

Then again, if you already have the dark extracts on hand and are trying to use them up...I guess that's a different story.



 
Reply With Quote
Old 05-10-2012, 04:43 PM   #3
CliffMongoloid
Recipes 
 
Jan 2012
Prompton, pa
Posts: 3,181
Liked 578 Times on 425 Posts


Quote:
Originally Posted by homebrewhaha View Post
Just a guess but this might end up pretty dark. Might want to look at your SRM. I guess it's a porter so that's okay, but it seems like there's a general consensus around here that it's better to start with lighter extracts and use specialty malts, etc. to then bring the beer up to where you want it in terms of color & flavor. This method gives you a lot more control since you don't really know what goes into the LME and DME that you might be doubling up in your specialty grains.

Then again, if you already have the dark extracts on hand and are trying to use them up...I guess that's a different story.
Yea i kinda wanna use this stuff up and do a little bit of experimenting while im at it. It says the SRMs will be around 25... Dark Brown color... I was just seeing if there would be any issues with the ingredients i listed

Thanks for the input tho

 
Reply With Quote
Old 05-10-2012, 05:30 PM   #4
CliffMongoloid
Recipes 
 
Jan 2012
Prompton, pa
Posts: 3,181
Liked 578 Times on 425 Posts


I was also wondering if anyone had any thoughts on how it would turn out

 
Reply With Quote
Old 05-11-2012, 03:08 PM   #5
CliffMongoloid
Recipes 
 
Jan 2012
Prompton, pa
Posts: 3,181
Liked 578 Times on 425 Posts


no input?

 
Reply With Quote
Old 05-11-2012, 03:39 PM   #6
fastenova
Recipes 
 
Dec 2011
Tigard, OR
Posts: 81
Liked 1 Times on 1 Posts


Sounds like good beer! I love Baltic porters. Why are you using the raw sugar, just to increase OG/ABV? Despite what some people say about using darker extracts, I have like every single beer I've done with dark LME. You certainly can get more control over the color with light LME and specialty malts, but I tend to care less about the shade and more about the taste, and dark extracts have always made full flavored beers when used with specialty grains.

I say, brew away, and let us know how it comes out!

 
Reply With Quote
Old 05-11-2012, 03:45 PM   #7
CliffMongoloid
Recipes 
 
Jan 2012
Prompton, pa
Posts: 3,181
Liked 578 Times on 425 Posts


Quote:
Originally Posted by fastenova View Post
Sounds like good beer! I love Baltic porters. Why are you using the raw sugar, just to increase OG/ABV? Despite what some people say about using darker extracts, I have like every single beer I've done with dark LME. You certainly can get more control over the color with light LME and specialty malts, but I tend to care less about the shade and more about the taste, and dark extracts have always made full flavored beers when used with specialty grains.

I say, brew away, and let us know how it comes out!
Yea i wanted to get it a bit higher but i could easily leave that out... would you suggest brewing it without the torbindao?

 
Reply With Quote
Old 05-11-2012, 03:53 PM   #8
fastenova
Recipes 
 
Dec 2011
Tigard, OR
Posts: 81
Liked 1 Times on 1 Posts


It would lighten up the body quite a bit, as it's about 15% of your fermentables... It seems like most Baltic porters that I've had that I can remember weren't especially light.

But you're also adding a large amount of maltodextrin and carapils - they'll add body to your brew. It is probably more than enough to offset the sugar. And, if you're just trying to get the ABV up to appropriate levels, and don't want to go pick up more extract, then you should go for it!

Have you used that much MD/carapils before in recipes? Seems like a little much but I don't have much experience with it, I think I've only used about 8 oz. of Carapils by itself before.

 
Reply With Quote
Old 05-11-2012, 03:55 PM   #9
CliffMongoloid
Recipes 
 
Jan 2012
Prompton, pa
Posts: 3,181
Liked 578 Times on 425 Posts


Quote:
Originally Posted by fastenova View Post
It would lighten up the body quite a bit, as it's about 15% of your fermentables... It seems like most Baltic porters that I've had that I can remember weren't especially light.

But you're also adding a large amount of maltodextrin and carapils - they'll add body to your brew. It is probably more than enough to offset the sugar. And, if you're just trying to get the ABV up to appropriate levels, and don't want to go pick up more extract, then you should go for it!

Have you used that much MD/carapils before in recipes? Seems like a little much but I don't have much experience with it, I think I've only used about 8 oz. of Carapils by itself before.
The most i have used is 6oz of carapils.... Malto dextrin and carapils do the same thing? (head retention) hmm i may want to rethink this

 
Reply With Quote
Old 05-11-2012, 04:05 PM   #10
fastenova
Recipes 
 
Dec 2011
Tigard, OR
Posts: 81
Liked 1 Times on 1 Posts


Well the maltodextrin is very unfermentable, so it will add body. The Carapils will add some body, and like you said, head retention.

I'd say vary the Maltodextrin for how much body/mouthfeel you personally like, I think 4-8 oz is fine as a range, especially if you're using sugar as well since that will reduce body. But also be aware that using all dark extract will also increase body a bit. I wouldn't be surprised if your FG ends up a little higher because of the unfermentables.



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hows this recipe look? fitchbrew Beginners Beer Brewing Forum 3 01-15-2012 04:39 AM
IPA First All Grain-Hows it looking scottyg354 Beginners Beer Brewing Forum 11 10-13-2011 06:06 PM
Hows my first recipe sound? verotik Beginners Beer Brewing Forum 3 04-15-2010 12:57 AM
hows this for a starter? nosmatt Beginners Beer Brewing Forum 4 11-17-2008 12:39 AM
First batch in secondary, hows it looking? clearlysuburban Beginners Beer Brewing Forum 1 05-27-2007 03:36 AM


Forum Jump