Another efficiency question... - Home Brew Forums

Register Now!
Home Brew Forums > Home Brewing Beer > All Grain & Partial Mash Brewing > Another efficiency question...

Reply
 
Thread Tools
Old 05-08-2012, 12:45 AM   #1
tochsner
HBT_LIFETIMESUPPORTER.png
 
tochsner's Avatar
Recipes 
 
Sep 2011
Edmonds, WA
Posts: 251
Liked 29 Times on 21 Posts



I have been all BIAB for a while. I typically get about 72-75% efficiency according to my trusty BeerSmith.
This weekend I did my first brew using a cooler mash tun and batch sparging. I ended up with about 58%.
I followed the steps outlined in the sticky for maximizing my batch sparge efficiency so I think I am good there.
My question is the crush. I have been using my mill from Rebel Brewer at the factory setting and it has been working good. The beer I made Sunday contained 60% wheat malt. Do I need to crush using a smaller gap for wheat?
__________________
Tony

Rescue Dog Brewing

 
Reply With Quote
Old 05-08-2012, 12:21 PM   #2

Besides the crush issues that you are looking at, did you stir really well when you mashed in and between the sparges?

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Efficiency Question owentp All Grain & Partial Mash Brewing 9 02-29-2012 02:44 AM
another efficiency question lokiua4 All Grain & Partial Mash Brewing 3 02-27-2010 04:42 AM
Efficiency Question effinpansy All Grain & Partial Mash Brewing 6 02-14-2010 03:21 PM
Efficiency question OhioMurb All Grain & Partial Mash Brewing 5 05-25-2009 12:08 AM
Efficiency question billk911 All Grain & Partial Mash Brewing 1 04-19-2009 04:05 PM


Forum Jump