WLP644 -Brett B Trois - Page 31 - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Lambic & Wild Brewing > WLP644 -Brett B Trois

Reply
 
Thread Tools
Old 12-03-2012, 09:39 PM   #301
Oldsock
 
Oldsock's Avatar
Recipes 
 
Sep 2007
DC, Washington DC
Posts: 3,237
Liked 255 Times on 169 Posts


Quote:
Originally Posted by AmandaK View Post
It's hard to find good judges. It's especially hard to find good judges for every competition.

That being said, how many people even know of this strain of yeast? And how many of those people are judging in comps? I wish there was a better way of educating the BJCP, but with it being a volunteer based organization, it's kind of hard.
Apparently the BJCP is considering adding some sort of American Sours category, eventually. I encouraged them to add a 100% Brett style as part of it, with clear guidelines of what sort of flavors to expect.
__________________
Check out The Mad Fermentationist for my adventures in fermentation and my book: American Sour Beers!

 
Reply With Quote
Old 12-05-2012, 05:32 PM   #302
uright
Recipes 
 
Mar 2012
Ventura, California
Posts: 24
Liked 3 Times on 3 Posts


Lots of great information in this thread!

I contacted Whitelabs for some information on wlp644 yesterday. According to John at whitelabs wlp644 is packaged with 50-80 Million cells/ml. Also, that the production date is 4 months prior to the expiration date, just like their standard yeasts.

I recently got gifted two vials that expired in the middle of November that I'm hoping to propagate up to a 5.5g 100% Brett pitch. It's my understanding that a Brett starter will nearly triple it's cell count in 7-8 days. Is that a fair guestament?

It would be great to hear from someone with experience propagating this yeast.

 
Reply With Quote
Old 12-05-2012, 05:52 PM   #303
WilliamWS
 
WilliamWS's Avatar
Recipes 
 
Apr 2010
New York, NY
Posts: 300
Liked 13 Times on 7 Posts


When making a starter for my RIS that I did a month ago I feel like the 644 worked pretty fast. I left it on the stir plate longer than I normally would for sacc but not 7-8 days, probably more like four days each time I stepped it up.

I never did a cell count but after stepping it up a couple of times I had what seemed to be plenty of yeast for 5gal of 1.094 wort. Fermentation was going crazy within a few hours, it dropped my gravity by 60 points in two days. After a week my RIS was down to 1.027 and over the course of the following 10 days it went to 1.023. It's been stable there for a couple of weeks so I'll probably bottle next week and give it a few months.

 
Reply With Quote
Old 12-06-2012, 04:22 PM   #304
bogwart
Recipes 
 
Sep 2011
league city, Texas
Posts: 24
Liked 1 Times on 1 Posts


Quote:
Originally Posted by WilliamWS View Post
When making a starter for my RIS that I did a month ago I feel like the 644 worked pretty fast. I left it on the stir plate longer than I normally would for sacc but not 7-8 days, probably more like four days each time I stepped it up.

I never did a cell count but after stepping it up a couple of times I had what seemed to be plenty of yeast for 5gal of 1.094 wort. Fermentation was going crazy within a few hours, it dropped my gravity by 60 points in two days. After a week my RIS was down to 1.027 and over the course of the following 10 days it went to 1.023. It's been stable there for a couple of weeks so I'll probably bottle next week and give it a few months.
You should wait and check the gravity over the course of a few weeks. Mine went from a 1.010 after around four weeks to a 1.006 at six weeks. It stabilized there and I bottled it at eight weeks. So, give it some more time.

 
Reply With Quote
Old 12-07-2012, 05:17 PM   #305
Coff
Recipes 
 
Aug 2010
Philadelphia, PA
Posts: 1,515
Liked 187 Times on 130 Posts


Has any experienced long bottle conditioning times with this strain? Ive had my Petite Saison in bottles for 7 weeks now and the beer is low on carb and no tastes a bit sweet, almost under attenuated which I am assuming is the rest of the priming solution bc it was bone dry going into the bottles.

I will admit however, it is a consistent 61f in my cellar atm which i know is a bit cool for bottle conditioning so I expected it to take a little longer but I thought it would be done by now. I grabbed a 6 pack and stuck it in the closet on my 3rd floor which is 72f so I'll give that a week or 2 and check it out.

 
Reply With Quote
Old 12-08-2012, 06:40 AM   #306
highgravitybacon
Recipes 
 
Sep 2012
Posts: 924
Liked 216 Times on 152 Posts


Quote:
Originally Posted by Coff View Post
Has any experienced long bottle conditioning times with this strain? Ive had my Petite Saison in bottles for 7 weeks now and the beer is low on carb and no tastes a bit sweet, almost under attenuated which I am assuming is the rest of the priming solution bc it was bone dry going into the bottles.

I will admit however, it is a consistent 61f in my cellar atm which i know is a bit cool for bottle conditioning so I expected it to take a little longer but I thought it would be done by now. I grabbed a 6 pack and stuck it in the closet on my 3rd floor which is 72f so I'll give that a week or 2 and check it out.
No, in fact I'm thinking I have a series of bottle IEDs waiting. I had a berliner weisse I bottled at 1.004 with some brett in half and no brett in the other half. I drank one of each tonight. The non brett was still a little undercarbed, and kind of sweet. No issues with it, except not very sour. They were about 2 weeks in the bottle sitting on a warm blanket at about 80F.

The brett beer, another story. I knew straight away I had issues when, upon opening, it sounded like someone disconnecting a train car. Massive gusher. Like about a minute. The beer was very mildly funky dry as a bone. So dry the hydrometer just sank right to the bottom of the test cylinder because I didn't put enough sample in. Both were carbed to 3.7 vol with table sugar. People are always saying "Oh, brett produces half the co2 as regular yeast." Bull****. The only difference in the two bottles was the presence of brett. So it's obviously the brett doing it.

 
Reply With Quote
Old 12-08-2012, 09:13 AM   #307
WilliamWS
 
WilliamWS's Avatar
Recipes 
 
Apr 2010
New York, NY
Posts: 300
Liked 13 Times on 7 Posts


If you packaged in Belgian style bottles or something similar then you're definitely fine.
Anything over 3.25-3.5 makes me nervous in regular bottles, though. IIR, regular bottles max out around 4.5 under ideal conditions but I think we've all seen bottles with flaws and I've heard of cases where they've supposedly gone off under 4.

 
Reply With Quote
Old 12-13-2012, 06:42 PM   #308
loctones
Recipes 
 
Jul 2009
Frederick, CO
Posts: 186
Liked 8 Times on 8 Posts


Does anyone have any experience using this in secondary? I intended to do an all-brett beer with this, but life got in the way. So, I pitched the vial into a batch of old ale that I've been aging. It's coming up on 5 months now. I took a sample a couple of months ago. The brett definitely did it's thing on attenuation, but not much in the flavor department. The added alcohol from the secondary fermentation made it taste harsh, actually. It definitely needed more time. I'm trying to let it get to 6 months before I take another sample.

 
Reply With Quote
Old 12-14-2012, 03:29 PM   #309
dstar26t
If it's worth doing, it's worth overdoing
HBT_SUPPORTER.png
Recipes 
 
Jan 2008
Ridley Park, PA
Posts: 1,152
Liked 57 Times on 42 Posts


Quote:
Originally Posted by uright View Post
Lots of great information in this thread!

I contacted Whitelabs for some information on wlp644 yesterday. According to John at whitelabs wlp644 is packaged with 50-80 Million cells/ml. Also, that the production date is 4 months prior to the expiration date, just like their standard yeasts.

I recently got gifted two vials that expired in the middle of November that I'm hoping to propagate up to a 5.5g 100% Brett pitch. It's my understanding that a Brett starter will nearly triple it's cell count in 7-8 days. Is that a fair guestament?

It would be great to hear from someone with experience propagating this yeast.
Go back to post #81 in this thread for cell counts. Some additional info I'll add that may help you is that on 10/31, I took 2 vials dated November and made a 1.040 240mL starter. It grew up to 104 Billion cells.

I've talked with John at White Labs too and I believe he doesn't have the correct information. He told me the same thing about cell count and expiration date for Brett well over a year ago. I believe they put a 6 month date on their Brett vials versus the standard 4 month. I had a vial of their WLP650 last year that would have been made 1 month in the future using the 4 month rule. All the Brett Trois that was produced this year was made in May which is obviously 6 months from the November date that is on all the vials I've seen, some of which I bought in May.
__________________
Next: ?
Fermenting: Azacca Oat Pilsner, Egregious-ish, Barrel Fermented Dreg DelcoLambic, Sacch Trois Helles
Drinking: RIS v7, Doppelbock, RIS v6, Carrot Blossom Cedar Mead, Sauerkraut Fermented Gose, Gueuze, Brett Blonde, Kriek, Saison, Sour Blonde
Barrel aged: Rye Barleywine, Tripel, Wee-Heavy

 
Reply With Quote
Old 12-14-2012, 06:50 PM   #310
spenghali
Recipes 
 
Jan 2009
Corvallis, OR
Posts: 456
Liked 17 Times on 17 Posts


Quote:
Originally Posted by WilliamWS View Post
If you packaged in Belgian style bottles or something similar then you're definitely fine.
Anything over 3.25-3.5 makes me nervous in regular bottles, though. IIR, regular bottles max out around 4.5 under ideal conditions but I think we've all seen bottles with flaws and I've heard of cases where they've supposedly gone off under 4.
Most people don't go over 3 volumes in standard bottles. It also differs a bit by brand, you can get a sense by weighing your different bottles and doing a weight to volume ratio. If you are reusing commercial bottles the maximum pressure will decrease after every use from the stress it goes through (and your new homebrew bottles for that matter).

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Repitching Brett from a 100% Brett fermented beer Coff Lambic & Wild Brewing 13 10-01-2015 09:53 PM
All-Brett still going Calder Lambic & Wild Brewing 6 02-02-2012 04:45 PM
Adding Brett to a Brett beer Calder Lambic & Wild Brewing 4 09-28-2011 04:39 PM
First All Brett November Lambic & Wild Brewing 12 06-25-2011 01:39 AM
Brett or something else? twohands Lambic & Wild Brewing 15 02-15-2010 01:52 AM


Forum Jump