Downsizing my Brew System - My Loss, Your Gain - Home Brew Forums

Register Now!
Home Brew Forums > Home Brew Market > For Sale > Downsizing my Brew System - My Loss, Your Gain

Reply
 
Thread Tools
Old 05-06-2012, 10:49 PM   #1
DKershner
 
DKershner's Avatar
Recipes 
 
Jul 2009
Bend, OR
Posts: 1,870
iTrader: (1)
Liked 28 Times on 23 Posts



ALL SOLD, THANKS!

Here is a link to a pile of pictures of all of this stuff: https://plus.google.com/photos/11702...CM3AmPOV5rydfQ

I will not part out anything to start, but if you want only a piece of what is being sold, post on here. If I get enough interest in enough parts, I will part it out.

Items For Sale:
Single tier 3-pot brew system including pots, burners, pumps, coils, and tubes/fittings. This is a turn key system, ready to go. The burners are a little rusty, but still work. You could replace em for $20ea if it bothers you, would be a 5min install. Here is a good description of the system and how it works: http://brew.dkershner.com/2010/the-slampbrewsystem/
This was the first ever shipped out Brewers Equipment stand. To build all of this new would cost about $1500 plus a whole lotta time, willing to sell as a unit for $800. SOLD This is a Local only sale for now, I don't want to think about what shipping this would be like.
Details on the System:
Built from 3 15.5gal Bayou Classic Pots, the pots themselves include bulkheads, thermometers, and sight glasses on all but the BK. The lids have inputs attached and the lids themselves are interchangeable to make mid-brew-day transfers easy. Only one hose disconnect and reconnect is necessary throughout the brew day. The pumps are controlled by switches on that waterproof box on the right. There is a very tiny leak in the HLT's sight glass, it drips about 3 drops per hour. Since its only water in there, I have never chosen to fix it. Losing 3 drops of mash would be another story.
The stand itself has been well taken care of, I have sanded and painted it many times. The stand comes with high temp black paint, probably enough to paint it 100 more times or so. There has been some rust here and there, but nothing that would prevent this stand from lasting another 1000 years. This system has been well used, for more than 100 batches, but never abused.
The HERMS heating and DITCHES end cooling is done by 2 50ft Stainless Steel coils (the heating process of the mash only takes 1). It is extremely easy to keep the mash within 1 degree of temp, and requires only a flip of a switch to heat it up slowly to mash out. The DITCHES cooling with one stage of 55F water and one stage of ice water can cool the 10gal boil to 70F in about 20min.

Some little valve thing that I never found a purpose for. It's gotta be from Chi Company...I'll see if I can figure out more about this one. Make Offer.

6-way CO2 splitter manifold with tubes, clamps, and disconnects. $40 + ship http://morebeer.com/view_product/163...nifold_-_6_Way SOLD

4 taps, shanks, nuts, tailpieces, hoses, and disconnects. One is a stout tap sorta like this one, but not as nice. One is 1/4" tubing and a 1/4" tailpiece, so if you want to use this for beer, you would need new 3/16" tubing. The tailpiece will work, but will be a tight squeeze. The taps are the standard ones, not perlick. SOLD

12 corny kegs, fully rebuilt, clean, and holding pressure. Ball locks. Comes with extra of the 4 small O-Rings. $40ea + ship. Could work out shipping and quantity discounts, but would prefer local. ALL Sold

Alright, that's it for now, thanks for looking! Let me know if you have any questions on any of this.

 
Reply With Quote
Old 05-06-2012, 10:51 PM   #2
atjsparty
HBT_LIFETIMESUPPORTER.png
 
atjsparty's Avatar
Recipes 
 
Feb 2011
Springfield, VA
Posts: 433
iTrader: (9)
Liked 17 Times on 14 Posts


I'll take the CO2 splitter manifold. Shipping estimate to 22151?

 
Reply With Quote
Old 05-06-2012, 10:55 PM   #3
usfmikeb
 
usfmikeb's Avatar
Recipes 
 
Jan 2011
Leesburg, Virginia
Posts: 3,148
iTrader: (5)
Liked 238 Times on 201 Posts


Quote:
Originally Posted by atjsparty View Post
I'll take the CO2 splitter manifold. Shipping estimate to 22151?
Dang you're quick! I would have taken it as well!

 
Reply With Quote
Old 05-06-2012, 11:48 PM   #4
90minman
Recipes 
 
Mar 2012
Forest hill, Maryland
Posts: 145
iTrader: (1)
Liked 1 Times on 1 Posts


Pm sent

 
Reply With Quote
Old 05-07-2012, 12:24 AM   #5
zeekage
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Jan 2011
Boston, MA
Posts: 748
iTrader: (7)
Liked 49 Times on 41 Posts


Damn. Would have loved that co2 manifold. Oh well.

 
Reply With Quote
Old 05-07-2012, 12:30 AM   #6
jman
Recipes 
 
Oct 2008
Posts: 128
iTrader: (0)
Liked 2 Times on 2 Posts


PM sent for faucet/shanks/etc

 
Reply With Quote
Old 05-07-2012, 01:10 AM   #7
atjsparty
HBT_LIFETIMESUPPORTER.png
 
atjsparty's Avatar
Recipes 
 
Feb 2011
Springfield, VA
Posts: 433
iTrader: (9)
Liked 17 Times on 14 Posts


I'd also be interested in one of the stainless coils...should the brew system be parted out.

 
Reply With Quote
Old 05-07-2012, 02:38 AM   #8
ProzHack
Recipes 
 
Oct 2011
Minneapolis, MN
Posts: 160
iTrader: (0)
Liked 1 Times on 1 Posts


Getting in line for the manifold. If it gets to me... zip code: 55407

 
Reply With Quote
Old 05-07-2012, 04:31 AM   #9
DKershner
 
DKershner's Avatar
Recipes 
 
Jul 2009
Bend, OR
Posts: 1,870
iTrader: (1)
Liked 28 Times on 23 Posts


Alright, so theres a line for the manifold, I will do a shipping quote tomorrow for you atjsparty and I will let the rest of you know if it goes south.

PMs replied to.

 
Reply With Quote
Old 05-07-2012, 12:44 PM   #10
Jaybird1622
Recipes 
 
May 2012
Staten island, New York
Posts: 11
iTrader: (0)

I'm in staten island how long us the drive up there, maybe I'll come pickup that system??

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Brew Magic System GnarlyBrewsKey For Sale 25 05-30-2014 01:44 PM
Brew Magic System jr1466 For Sale 0 01-30-2012 01:48 PM
Brew Magic System jr1466 For Sale 6 01-29-2012 01:38 PM
B3 1550 Brew System sanchezhb For Sale 13 11-14-2011 09:46 PM
Downsizing in VT pdbreen For Sale 9 05-21-2011 01:47 PM


Forum Jump