3 Gauge Regulater with 1 gauge that stopped working. - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Bottling/Kegging > 3 Gauge Regulater with 1 gauge that stopped working.

Reply
 
Thread Tools
Old 05-05-2012, 07:29 PM   #1
garcara
Recipes 
 
Mar 2011
Seattle, WA
Posts: 101
Liked 3 Times on 3 Posts



Hi, I have a 3 gauge regulator and the one furthest from where the co2 comes in is not letting any co2 through. Any ideas?



 
Reply With Quote
Old 05-05-2012, 09:09 PM   #2
1KD1
Recipes 
 
Jan 2012
Kansas City, Missouri
Posts: 174

Assuming you have already tried adjusting the output pressure on that regulator, I would try removing the nipple (check valve) from bottom of regulator. There will be a rubber seal to check and Clean and push on the little SS ball inside to exercise the spring.

Someone else might know more but that should give you something to start with.

 
Reply With Quote
Reply
Thread Tools



Forum Jump