Draft tower cooler box volume question - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > Draft tower cooler box volume question

Thread Tools
Old 05-04-2012, 04:43 PM   #1
May 2012
San Diego, CA
Posts: 1

I am putting together a draft tower cooling fan set up together at the moment and have a quick question regarding the size of the box needed to contain the fan. Rather than using a project box I am planning on using a plastic electrical junction box from home depot. I have purchased two, one is 4x4x4 cube as seen in the link http://www.kegerators.com/articles/c...ooling-fan.phpthe other is 4x4x2. Is there any benefit to using the larger box rather than the smaller one? I will be installing a 80mm 12v fan and using 3/4 tubing to deliver the cold air to the tower. I would prefer to use 1 tubing but it is too large to fit through the top of my kegerator. Which box should I use? Thanks for the help.
Click image for larger version

Name:	kegfan1.jpg
Views:	439
Size:	4.6 KB
ID:	60076  

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
CD Spindle Draft Tower Cooler kingfetty Kegerators & Keezers 5 04-22-2011 06:43 PM
Draft tower install question chaydaw Kegerators & Keezers 0 02-19-2011 07:59 PM
It is finished...the draft tower that is jgourd Kegerators & Keezers 1 11-19-2010 02:40 PM
DIY draft tower? stevecaaster Kegerators & Keezers 19 02-11-2010 02:17 PM
Can I modify my draft tower? LastCall Kegerators & Keezers 1 05-25-2008 07:38 AM

Forum Jump