How did you install weldless hlt coil? - Page 2 - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kettles, Mash Tuns & Hot Liquor Tanks > How did you install weldless hlt coil?
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 05-03-2012, 10:35 PM   #11
CidahMastah
Recipes 
 
Nov 2010
, New York
Posts: 4,209
Liked 42 Times on 39 Posts


yeah in general... the herms coil addition w/ hardware and hose is several hundred dollars if you go all stainless. That is why I waited a bit before I did mine. Two brews on it though and I think I really like it. Going to try a step mash with it and see how it turns out.


__________________
Man,... That's a lotta hooch!
Steel rig in progress
ebuild info

 
Reply With Quote
Old 05-04-2012, 01:50 PM   #12
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 22,974
Liked 1583 Times on 1020 Posts


No one ever said a HERMS system was going to be cheap. The benefit to all stainless is that you could use it for 3 years and sell it for almost what you paid. If you do it with copper, it's probably going to look pretty dingy by that time.


__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 05-04-2012, 02:55 PM   #13
CidahMastah
Recipes 
 
Nov 2010
, New York
Posts: 4,209
Liked 42 Times on 39 Posts


Quote:
Originally Posted by Bobby_M View Post
No one ever said a HERMS system was going to be cheap. The benefit to all stainless is that you could use it for 3 years and sell it for almost what you paid. If you do it with copper, it's probably going to look pretty dingy by that time.
very true. And I agree with all the rest as well.

Your statement about copper is why I am considering making a stainless immersion chiller to replace my current copper chiller.
__________________
Man,... That's a lotta hooch!
Steel rig in progress
ebuild info

 
Reply With Quote
Old 04-30-2013, 04:33 PM   #14
Frothy3001
Recipes 
 
Aug 2012
waterloo, ontario
Posts: 34


Im in the same boat, i have a 50' stainless coil with 2 90 degree bends to go strait out of the keg. I was looking on how to attach the coil inside with the fittings you mentions bobby. Could you post a link to your site on which fittings you would use for this project. I have the coil but am still trying to figure it out. Seems like your prices are right up my ally.

the coil is 1/2 inch outside diameter.

 
Reply With Quote
Old 04-30-2013, 06:22 PM   #15
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 22,974
Liked 1583 Times on 1020 Posts


I have some custom made fittings exactly for this purpose on the way, but probably won't be here for 2 weeks. They are based on the bulkheads I use on my weldless diptubes, but have 1/2" tube compression instead of 5/8".

You can still make a functional equivalent with http://www.brewhardware.com/fittings...ubecompression
1/2" NPT male x 1/2" tube.

and the 1/2" make weldless kit on here: http://www.brewhardware.com/thermome...l-thermometers

Teflon tape goes on the threads of the compression fitting, thread the locknut all the way down, silicone gasket, through the keg wall, then SS washer, then ball valve or type A camlock to create the gasket compression.


__________________
Welcome to BrewHardware.com. I love you.
BIAB Large Mesh False Bottoms and SS HERMS COILS are IN!!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Reply
Thread Tools



Forum Jump