I'll try to get some pics up later but, my black Fridgidaire 7.2 CU FT Keezer is for sale. I built this guy about a year ago and I'm changing to a refrigerator based model so I have room to store some more sixers and frozen storage for hops, and what have you in my new brew shed.
The item is pick up only from Lebanon, PA and includes the Black Fridigaire, the Collar, 3 Perlic 525 SS taps (without handles!), a collar mounted two pressure regulator, 3 8' - 10' fluid lines with ball-lock adapters, 2 gas lines with ball-lock connectors. Notice there are three taps but only two gas lines, if you wanted to do 3, you would need an aluminum distributor. I also had a Nitro tank in the keezer to push wine with for the third tap.
This also includes the digital Love controller embedded in the collar. I also have a fourth hole drilled out with stainless look cap over the hole in-case you would want to add a fourth tap. No warranty but, it is working and you can see it in my basement!
It also includes a stand with 4 roller wheel for easy moving. I'll try to post some pictures later, it has 3 hinges to support the weight of the collar, and includes an AC fan which is all hooked up to circulate the air within the Keezer. I've dumped well over $800 into this guy between stains, sealers, freezer, etc. I also have a wooden accessory I built to hold a small CO2 tank and a small nitro tank within the keezer. I'm not including a CO2 tank so you would need to purchase a CO2 tank from Kint, AirGas, whatever, and of course some ball-lock kegs and you would be good to go! I'll post pics later tonight. Make me an offer via PM!
The stand looks very close to the following:
Minus the drip tray and I attached the wheels to a stained base which detaches for easy transport. My gas setup is also a bit different and self contained within the Keezer via high pressure hose to the regulator. Kept it all "self-contained". I also have insulation around the inside of my collar where I could get it.