Topping off secondary? - Home Brew Forums

Register Now!
Home Brew Forums > Wine, Mead, Cider, Sake & Soda > Mead Forum > Topping off secondary?

Reply
 
Thread Tools
Old 04-29-2012, 11:07 PM   #1
hophacker
Recipes 
 
Mar 2012
St Paul, MN
Posts: 8
Liked 1 Times on 1 Posts



I have 5 gallons of Mead that is entering fermentation in a 5 gallon plastic bucket shortly. However, the glass carboy I intended to use for racking is 6.5 gallons.

I know that there should be a minimal amount of airspace in the secondary, so I'm wondering if it is acceptable to top off with cool water in the secondary to raise the liquid volume and reduce airspace, or if this would dilute or otherwise affect the mead in a negative way.

Any ideas?

 
Reply With Quote
Old 04-30-2012, 12:12 AM   #2
Yooper
Ale's What Cures You!
HBT_ADMIN.png
 
Yooper's Avatar
Recipes 
 
Jun 2006
UP of Michigan, Winter Texan
Posts: 69,421
Liked 7845 Times on 5497 Posts


You'd be diluting with water 1.5 gallons or more (since you'll have less than five gallons from the primary due to the lees). That's way too much!

When you make your recipe, either make it for your vessel size, or use a smaller carboy. For a 5 gallon batch, you need a 5 gallon carboy.
__________________
Broken Leg Brewery
Giving beer a leg to stand on since 2006

 
Reply With Quote
Old 05-01-2012, 03:05 AM   #3
brewdude76
Recipes 
 
Mar 2009
Metro Detroit
Posts: 46

Buy sterilized marbles and then sanitize them before putting them in the bottom of the carboy. This will reduce the amount of airspace at the top without compromising your recipe. Play around with how many marbles it will take to raise it 1.5 gals, measure twice cut once kind of mentality.
__________________
In Europe...Drinking wine was not a snobbism nor a sign of sophistication nor a cult; it was as natural as eating and to me as necessary.
-Ernest Hemingway

 
Reply With Quote
Old 05-01-2012, 12:17 PM   #4
roadymi
Recipes 
 
Dec 2009
Middle of the Mitten, Michigan
Posts: 807
Liked 33 Times on 31 Posts


Seems to me you could add the same honey to water ratio you used in your primary. This is assuming that you havn't maxed out your yeast.
__________________
Reality is an illusion that occurs due to the lack of alcohol.
Give a man a beer, he'll drink for the day.Teach a man to brew, he'll be drunk the rest of his life.
I have 8 carboys, 8 cornies, 5-1 gal jugs, 200 wine bottles, 10 cases of beer bottles and a nice assortment of flip tops....My goal is to keep them at least 50% occupied

 
Reply With Quote
Old 05-01-2012, 12:34 PM   #5
TheBrewingMedic
 
TheBrewingMedic's Avatar
Recipes 
 
Dec 2011
Stanfordville, NY
Posts: 651
Liked 27 Times on 27 Posts


The way I've found to get around the topping off without diluting your mead is to make traditonal batches of dry and sweet mead. serves a couple of purposes.

First you can top off without the downside of using water that would dilute or using something that despite sanitizing leaves you opportunity for introducing stuff you don't want in your drink. Obviously just top dry with dry and sweet with sweet.

Second, if I make something too sweet or too dry for my tastes instead of worrying about the process of stabilizing to prevent more fermentation with back sweetening I have a finished mead I can sweeten it up with and alternately I can cut something too sweet with a dry mead without the concerns of diluting with water or ...shudders...using grape wine to do it.

 
Reply With Quote
Old 05-01-2012, 02:20 PM   #6
BrewersKaramazov
 
BrewersKaramazov's Avatar
Recipes 
 
Jan 2011
Vancouver, Washington
Posts: 242
Liked 12 Times on 12 Posts


Quote:
Originally Posted by TheBrewingMedic
The way I've found to get around the topping off without diluting your mead is to make traditonal batches of dry and sweet mead. serves a couple of purposes.

First you can top off without the downside of using water that would dilute or using something that despite sanitizing leaves you opportunity for introducing stuff you don't want in your drink. Obviously just top dry with dry and sweet with sweet.

Second, if I make something too sweet or too dry for my tastes instead of worrying about the process of stabilizing to prevent more fermentation with back sweetening I have a finished mead I can sweeten it up with and alternately I can cut something too sweet with a dry mead without the concerns of diluting with water or ...shudders...using grape wine to do it.
I was thinking of doing this. I have a ginger mead that is dry and has too much acid blend in it(LHBS advice). I topped off the first time with a honey water mix, but I am thinking about using JOAM next time. I hope it will bring the acidity down and also begin to get the sweetness where I want it.
__________________
Beer makes me better looking.

 
Reply With Quote
Old 05-01-2012, 03:07 PM   #7
TheBrewingMedic
 
TheBrewingMedic's Avatar
Recipes 
 
Dec 2011
Stanfordville, NY
Posts: 651
Liked 27 Times on 27 Posts


I'm working on a 3 gallon batch of each, it also serves as good examples for the "what is mead" questions, I am going to bottle in either 12 or 16 oz bottles, then can crack them open for people to sample or use as the sweet/dry adjusters or topping off

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Topping Up Tinman13 Mead Forum 2 04-28-2012 10:57 AM
Topping up ?'s Tnoodle Mead Forum 13 07-31-2011 11:44 PM
Exotic topping off into secondary RedCabbage Mead Forum 3 11-03-2010 09:17 AM
Topping off hooligansteve Mead Forum 6 10-17-2008 03:44 PM
topping up OdinOneEye Mead Forum 2 08-02-2007 08:25 PM


Forum Jump