Stainless Steel Washers Take 2 - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Equipment/Sanitation > Stainless Steel Washers Take 2

Reply
 
Thread Tools
Old 06-22-2007, 06:36 PM   #1
Drunkensatyr
 
Drunkensatyr's Avatar
Recipes 
 
Apr 2007
Posts: 1,997
Liked 17 Times on 13 Posts



I Seem to have gotten myself into a familiar predicament, Only way I could get 5/8 SS washers was to buy bulk. Price is good, but many many more than I need. Soooooo (this is where it gets familiar) If anyone wants some, PM me and I'll give ya my address. Send me a buck and 2 are your to enjoy.

 
Reply With Quote
Old 06-22-2007, 06:41 PM   #2
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,338
Liked 1765 Times on 1122 Posts


And you're using these for 3/8" pipe nipple bulkheads?
__________________
Welcome to BrewHardware.com. I love you.
New Stirplates are IN!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Old 06-22-2007, 06:56 PM   #3
Drunkensatyr
 
Drunkensatyr's Avatar
Recipes 
 
Apr 2007
Posts: 1,997
Liked 17 Times on 13 Posts


Yes. They are for the 3/8 fittings on a mash tun. I used galvanized when I built it, and the rust has finally got too much for me to bare!!! Used it like that for years, but had to break down and redo it with SS.

 
Reply With Quote
Old 06-22-2007, 07:02 PM   #4
Bobby_M
Vendor and Brewer
HBT_SPONSOR.png
 
Bobby_M's Avatar
Recipes 
 
Aug 2006
Whitehouse Station, NJ
Posts: 23,338
Liked 1765 Times on 1122 Posts


I found 3/4" ones for 1/2" nipples at Lowes. Since I batch sparge, the bigger the bulkhead, the better. Hopefully enough folks here want to go with 3/8" that they'll clean out your bulk.
__________________
Welcome to BrewHardware.com. I love you.
New Stirplates are IN!
Chugger Pumps, Pump Kits, Camlocks, Sightglasses, Clear USA made Silicone Tubing, RIMS, Electric Install Parts, etc.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
is there any way to tell if something is Stainless Steel Grinder12000 Equipment/Sanitation 25 05-12-2010 01:44 PM
5/8 Stainless Steel Fender Washers mroberts1204 Kettles, Mash Tuns & Hot Liquor Tanks 10 06-09-2009 05:56 PM
PSA: Vendor for stainless 5/8" washers for your cooler MLT skifast1 Kettles, Mash Tuns & Hot Liquor Tanks 2 04-04-2008 09:33 PM
Stainless Steel washers Don Equipment/Sanitation 11 04-04-2008 05:34 AM
Stainless steel fender washers.... newguy Equipment/Sanitation 8 11-07-2007 04:08 AM


Forum Jump