Fermentation time vs. gravity reading - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Fermentation time vs. gravity reading

Reply
 
Thread Tools
Old 04-23-2012, 06:21 PM   #1
akbrew55
Recipes 
 
Apr 2012
beaumont, ca
Posts: 5


This was my first brew. The instructions said to wait 14 days. At day 9 i took a gravity reading and it was exactly what i needed it to be. 1.022. If i would have kept it in there for the full 14 days, would the gravity be lower even though it was in the maturation phase? May be a dumb question, just wondering if i bottled too early. Thanks.

 
Reply With Quote
Old 04-23-2012, 06:29 PM   #2
stratslinger
HBT_SUPPORTER.png
 
stratslinger's Avatar
Recipes 
 
Dec 2010
Terryville, CT
Posts: 2,507
Liked 215 Times on 179 Posts


That depends on a couple of things... Assuming this was an extract brew and you used the recommended yeast strain for the recipe or kit you brewed, then chances are you'll finish up right at or near the projected final gravity.

If it was an all grain brew and/or you used a different yeast, then there can be quite a few variables. Mash temperatures can lead to wort that's more or less fermentable. Some yeast attenuate more or less (some times a LOT more or less) than others. Etc, etc...

That said - there's a lot of other things going on at that point in fermentation, and just because a beer has reached a specific gravity does not necessarily mean that it's ready to bottle. In general, you want to be sure that it's reached a constant gravity for at least 3 consecutive days before you bottle (to make sure that you don't wind up with any bottle bombs!). Also, if you give the beer a few days after reaching final gravity, the yeast can clean up some of the by products of fermentation, often leading to a cleaner tasting beer.

However, I do know a guy who, as a general rule, kegs dang near everything at day 10. And I can honestly say I haven't had a bad beer that he's made.

 
Reply With Quote
Old 04-23-2012, 06:38 PM   #3
bobeer
 
bobeer's Avatar
Recipes 
 
Feb 2012
Round Hill, VA
Posts: 1,983
Liked 294 Times on 243 Posts


Quote:
Originally Posted by akbrew55 View Post
This was my first brew. The instructions said to wait 14 days. At day 9 i took a gravity reading and it was exactly what i needed it to be. 1.022. If i would have kept it in there for the full 14 days, would the gravity be lower even though it was in the maturation phase? May be a dumb question, just wondering if i bottled too early. Thanks.
You usually want to bottle when your gravity readings stop changing. Just because the directions say it's supposed to be a certain gravity doesn't mean you'll get the exact same. Might be close or even spot on but you wont be sure until the beer is finished. Even then you can keep the beer on the trub for a while longer so the yeast can clean up after themselves. Congrats on the first brew!!
__________________
Camp Brew Co.
On Tap: Hop Smoosher, #NotMyStout
Primary: 3 Day weekend IPA
Bottled: Imperial Pumpkin in my Pie, Bourbon Oak Brolic Strong ale

 
Reply With Quote
Old 04-23-2012, 06:41 PM   #4
Barnzy02
Recipes 
 
Aug 2008
Philadelphia, PA
Posts: 596
Liked 25 Times on 17 Posts


the general HBT rule of thumb would be a 3 week primary and 3 weeks in the bottle.

I ferment my beers anywhere from 10-21 days.

To me a lot of it depends on the style and ingredients used.

I like to leave my IPAs for atleast 21 days in primary with a 7 day dry hop before kegging.

However, a blonde ale i brewed just passed the 10 mark has been at FG for 3 days, will be kegged tonight or tomorrow.

The biggest thing is making sure your fermentation has bottomed out, as stated above, consistent hydrometer readings for 3 days will let you know that your main fermentation is finished.

Thus beginning the lengthy debate on how long to leave on the yeast cake.
__________________
Primary - Amber Alert IPA
Primary - Mild
Primary - empty

Keg - PennsPorter - Vanilla Porter
Keg - Rye Pale Ale



Pennsport Brewing

 
Reply With Quote
Old 04-23-2012, 06:44 PM   #5
Genjin
Recipes 
 
Feb 2012
Denver, CO
Posts: 262
Liked 8 Times on 8 Posts


Err on the side of patience. You can't harm a beer by bottling a week after it's ready but you can harm it by bottling a day early. If it is supposed to finish at 1.022 then I assume it is a very big beer. Longer primary might be a very good thing. What was the OG?

All that being said, I bottled my first beer after two weeks and drank most of it by the time it was two weeks in the bottle. So, I know how tempting it is to speed things along on that first one!

 
Reply With Quote
Old 04-23-2012, 09:15 PM   #6
akbrew55
Recipes 
 
Apr 2012
beaumont, ca
Posts: 5

Thank you everyone very much for the information.
To Genjin: It is a Porter with a 1.060 OG. And i am trying my best to leave it alone while its priming in the bottles. I cant wait! Thanks again.

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Should I take a gravity reading? ASuarez Beginners Beer Brewing Forum 2 07-26-2011 10:51 AM
First gravity reading ever slantedbolt Beginners Beer Brewing Forum 5 11-18-2010 02:20 AM
Gravity reading as it applies to fermentation Sneaker Beginners Beer Brewing Forum 7 11-14-2009 02:48 PM
First time brewing a high-gravity beer...secondary fermentation ? kjung Beginners Beer Brewing Forum 4 05-21-2008 09:13 PM
Gravity Reading Low burch Beginners Beer Brewing Forum 6 02-09-2007 01:13 AM


Forum Jump