Well, I made beer! - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Electric Brewing > Well, I made beer!

Thread Tools
Old 04-16-2012, 03:23 AM   #1
Apr 2010
Posts: 196
Liked 15 Times on 13 Posts

After taking two years to build my all electric, all triclover, single tier, I put it to the test today. The biggest concerns were with coming up with the correct strike temp to hit the mash temp. Well, I could not be happier. I only missed the mash temp by one degee. I remembered from doing some testing with just water, to run my rims temp about 2 degrees higher than the mash target. I was not nearly as good on the sparge however. I am using a 3000 watt foldback element in my rims tube. With my big triclover pumps, I was able to jack up the flow, they are 90 volt D.C. motors with variable speed. The big flow over the rims tube allowed me to reach mash out very quickly, even though I undershot my temp. My calculations on mash and sparge water additions were spot on, and after the boil, ended up with exactly 5 gallons. I use a 6.5 gal carboy for primary and my 5 gallon mark is the top of my fermometer tape. My duda diesel plate chiller absolutely rocked, I recirculate back to the boil kettle with a side inlet trying to create a whirlpool. The first pass was cooling the wort to 80 degrees, and after just 5 or 6 minutes the 5 gallons was down to 67 degrees. The morning did not go as good, I was reaching to put my hydrometer in some Starsan, and dropped it 6 inches onto my driveway promply breaking it. Since everything else went according to plan, I am assuming I am close to the O.G. What are your thoughts?

The mash in progress......

The Duda socket weld chiller with triclover fittings.....

Reply With Quote
Old 04-16-2012, 06:40 AM   #2
Sep 2011
los angeles, california
Posts: 30

Those are some beautiful pics...a few more would be awesome when you have the chance.

Reply With Quote
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Mistakes I made while attempting Kals Electric build NewBrewB Electric Brewing 38 04-05-2013 01:43 PM
Any commerically made Electric Urns? Prymal Electric Brewing 9 03-29-2012 06:10 AM
Something tells me I just made a boo boo... Beer_Maker Electric Brewing 20 02-24-2011 07:43 PM

Forum Jump