Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > Beginners Beer Brewing Forum > Recipie Help.. What hops to use with this grain bill...
Reply
 
Thread Tools
Old 04-12-2012, 04:12 AM   #1
Draken
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: Matthews, NC
Posts: 415
Liked 18 Times on 16 Posts

Default Recipie Help.. What hops to use with this grain bill...

I am trying to figure out how to hop the second runnings of a partigyle recipe.. If you break it down this is essentially the grain bill for a 2.5 gallon batch:
Amount Percentage Name Time Gravity
0.31 lbs 6.74 % Briess Carapils 60 mins 1.034
0.23 lbs 5.00 % Briess White Malt Wheat 60 mins 1.039
0.31 lbs 6.74 % Briess Caramel 40L 60 mins 1.034
3.00 lbs 65.22 % Briess 2-Row Pale Ale Malt 60 mins 1.037
0.75 lbs 16.30 % Briess Pilsen DME 60 mins 1.043

I am adding the DME to boost the ABV a point. But how to hop it? I am not even sure where this is going to end up style wise either.


Draken is offline
 
Reply With Quote
Old 04-12-2012, 04:56 AM   #2
JoshuaWhite5522
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
JoshuaWhite5522's Avatar
Recipes 
 
Join Date: Jan 2009
Location: Puyallup, WA
Posts: 673
Liked 16 Times on 13 Posts
Likes Given: 6

Default

plugging it into beersmith this gives an OG of 1.049. But that value is based off a whole mash and sparge from the grain bill, not the second runnings of what you gave me. I would imagine your second runnings would be at best half that. What abv are you shooting for? Doubling the DME would bump you up to 1.062. What are you shooting for in you hop profile? Half an ounce of cascade at 5.5% AA on a 60 min boil will give you about 17 IBU if you don't add more DME than what is in the profile you posted. Which should be pretty noticeable given how light the beer will be. If you did double the DME addition, you could expect 15 IBU.


__________________
The problem with the world is that everyone is a few drinks behind
- Humphrey Bogart

My Keezer Build

My Kegbot Over 1000 pints poured!

Reason: fixed a few errors
JoshuaWhite5522 is offline
 
Reply With Quote
Old 04-12-2012, 04:57 AM   #3
djfriesen
Feedback Score: 0 reviews
Recipes 
 
Join Date: Sep 2011
Posts: 1,188
Liked 26 Times on 24 Posts
Likes Given: 6

Default

Looks almost like a wheat IPA to me. Throw it in some software and see what comes out gravity- and color-wise. Personally, I'd throw some amarillo/cascade/centennial at it and make a wheat IPA.
djfriesen is offline
 
Reply With Quote
Old 04-12-2012, 12:52 PM   #4
Draken
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: Matthews, NC
Posts: 415
Liked 18 Times on 16 Posts

Default

Quote:
Originally Posted by JoshuaWhite5522
plugging it into beersmith this gives an OG of 1.049. But that value is based off a whole mash and sparge from the grain bill, not the second runnings of what you gave me. I would imagine your second runnings would be at best half that. What abv are you shooting for? Doubling the DME would bump you up to 1.062. What are you shooting for in you hop profile? Half an ounce of cascade at 5.5% AA on a 60 min boil will give you about 17 IBU if you don't add more DME than what is in the profile you posted. Which should be pretty noticeable given how light the beer will be. If you did double the DME addition, you could expect 15 IBU.
I reduced the grain bill to hit the expected OG of the second runnings. This isnt the actual weights if the grain bill, but it is the correct percentages. The only other difference would be that I would expect the color to come in around 4.5.
Draken is offline
 
Reply With Quote
Reply


Thread Tools



Forum Jump

Newest Threads

LATEST SPONSOR DEALS