How To Make A Beer Crate For 12oz Beer Bottles - Page 3 - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > DIY Projects > How To Make A Beer Crate For 12oz Beer Bottles

Reply
 
Thread Tools
Old 04-11-2012, 05:26 PM   #21
mmurray
Recipes 
 
Nov 2009
Internet
Posts: 327
Liked 9 Times on 7 Posts


Awesome! Been thinking about this for a while!
__________________
“God bless Homebrewing Beer. There are many things a man can do with his time. And this, is better than those things.”

Gulf Coast Brewers League

 
Reply With Quote
Old 04-11-2012, 06:16 PM   #22
JonGrafto
 
JonGrafto's Avatar
Recipes 
 
Jan 2012
Central Part of the State..., WI
Posts: 1,873
Liked 157 Times on 114 Posts


Quote:
Originally Posted by nds34d View Post
I used a pneumatic stapler and some wood glue. It is holding together great.
I ended up putting one together at lunchtime today. I used 1" brad nails (probably should have used 1 1/4") with my electric nailer. Went super fast and looked good... Firring strips are sometimes crooked so you have to watch out for the squareness when picking out wood.

All in all, looked good and without the dividers, I was able to fit 26 standard bottles.

 
Reply With Quote
Old 04-11-2012, 06:19 PM   #23
Phyrst
Recipes 
 
Sep 2011
Katy, TX
Posts: 185
Liked 15 Times on 10 Posts


This is awesome, and I like the aesthetic touches you put on them to make them not look like something you want to hide in the closet or garage when company comes over. I have way more bottles than cardboard cases to store them in, and last night I had a few of those boxes get destroyed in a water leak. I think I'm going to build a few of these. You have inspired me, sir!

 
Reply With Quote
Old 04-13-2012, 01:31 AM   #24
jybingbrew
HBT_SUPPORTER.png
Recipes 
 
Feb 2011
Binghamton, NY
Posts: 68
Liked 1 Times on 1 Posts


I made one slight modification that allows you to cut the # of pieces of lumber (assuming 8') from 4 pieces (2 of each) to 3 pieces by replacing the 5 17" slats made with the 1x2 with 4 17" pieces made with the 1x3.

This will actually let you make 2 full crates with 5 total piece since the 1x2 strip can be used across 2 differen crates by only using it for the vertical pieces.

Summary of the breakdown for one crate:

1x3: 18.5 | 18.5 | 18.5 | 18.5 | 10.5 | 10.5
1x3: 10.5 | 10.5 | 17 | 17 | 17 | 17
1x2: 10 | 10 | 10 | 10

Thanks for sharing this idea, and thanks to the original fence picket too! Awesome being able to make 2 crates for less than $5 (I didn't do the dividers).

funnycreature Likes This 
Reply With Quote
Old 04-13-2012, 06:05 PM   #25
JonGrafto
 
JonGrafto's Avatar
Recipes 
 
Jan 2012
Central Part of the State..., WI
Posts: 1,873
Liked 157 Times on 114 Posts


This is the third one that I have made in the past week. Small mods but looks good. I am going to use the vinegar and steel wool trick to condition it. Here are some pics.
Click image for larger version

Name:	image-2173154734.jpg
Views:	6006
Size:	25.9 KB
ID:	56851   Click image for larger version

Name:	image-518918068.jpg
Views:	5576
Size:	26.2 KB
ID:	56852   Click image for larger version

Name:	image-1666174433.jpg
Views:	5667
Size:	28.2 KB
ID:	56853  
__________________
Quote:
Originally Posted by Whattawort View Post
Looks like a zombie took a dump in your bucket after a night of binging on hot arse and cabbage.

 
Reply With Quote
Old 04-13-2012, 09:58 PM   #26
Supurb
Recipes 
 
Feb 2012
West Milwaukee, WI
Posts: 202
Liked 14 Times on 11 Posts


That is sharp looking ! Great job ! I made some with plans from here, they also turned out great.

http://www.beerclings.com/index.php?...tegory&path=81

 
Reply With Quote
Old 04-15-2012, 12:04 AM   #27
MMachi
Recipes 
 
Sep 2011
Pleasanton, CA
Posts: 43
Liked 1 Times on 1 Posts


Stopped at Lowes this morning and picked up some materials. A few hours later I have my first of many crates ready for finishing. This is a great low cost project! I used wood glue and a mixture of 1" staples and 1 5/8" brads with my pneumatic nailer and it's nice! Thanks!

Click image for larger version

Name:	image-3126232892.jpg
Views:	3912
Size:	66.1 KB
ID:	57072

 
Reply With Quote
Old 04-15-2012, 04:46 AM   #28
WoolyBooger
Recipes 
 
Feb 2012
Posts: 162
Liked 17 Times on 12 Posts


I made one of these today. Just a couple comments, the logo process didn't work well for me. It only transferred to the high spots on the wood grain. I didn't sand it, maybe you could get it flat enough to work. Also, I am making dividers, but I will use my own measurements. The measurements for the picket design would be smaller than my crate. Overall though, I am really happy with it and I will definitely make more. Thanks for posting the instructions!

 
Reply With Quote
Old 04-15-2012, 07:06 PM   #29
jtswkd
Recipes 
 
Dec 2011
USAF, Misc
Posts: 32
Liked 2 Times on 2 Posts


I just made 3 of these, for abut 4.66 + tax a piece can't beat it! used some old cardboard for dividers and the bottle are held snug. Also added some small tabs using scraps that allow them to be stacked securely.

If I had a chop saw mine would be a lot prettier, but close enough for beer!

 
Reply With Quote
Old 04-15-2012, 10:05 PM   #30
Vellum
Recipes 
 
Dec 2011
Dripping Springs, Texas
Posts: 196
Liked 36 Times on 28 Posts


I just made four of these at about $2.50 each. Hopefully the picture loads.

Click image for larger version

Name:	ForumRunner_20120415_180540.jpg
Views:	4098
Size:	10.6 KB
ID:	57220

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY Wooden Beer Bottle Crate Jeepninja DIY Projects 36 03-17-2014 09:23 PM
Burned Bottle Crate CAustin919 DIY Projects 10 02-27-2012 03:37 AM
Wooden Bottle Crate for 22oz Bottles mobilecabinworks DIY Projects 31 01-23-2012 04:22 AM
Anyone ever make Beer Bottle Shelves? celtic_dude DIY Projects 17 09-03-2011 02:45 PM
DIY Tumbler from Beer Bottles John Beere DIY Projects 46 09-08-2010 02:37 AM


Forum Jump