Alcohol Content Always Seems Low - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Extract Brewing > Alcohol Content Always Seems Low

Reply
 
Thread Tools
Old 04-05-2012, 12:54 AM   #1
txstars15
Recipes 
 
Aug 2011
Dallas, TX
Posts: 37


Hi-

I brew from extract kits and always use the bag of priming sugar when I bottle. My beer comes out fine but every batch seems low in alcohol to me, i.e. not much of a buzz after 2 or 3 bottles.

Comparing to drinking say 3 bottles of a store bought beer, mine seems pretty light on the good stuff. Any ideas why this may be or is it just my imagination!



 
Reply With Quote
Old 04-05-2012, 12:59 AM   #2
bottlebomber
Recipes 
 
Apr 2011
Ukiah, CA
Posts: 14,345
Liked 2737 Times on 2112 Posts


How many of these extract kits have you made, and what were they? If you've taken the OG and FG then you know exactly what the ABV% is.



 
Reply With Quote
Old 04-05-2012, 01:00 AM   #3
SterlingHopper
Recipes 
 
Feb 2011
Knoxville, TN
Posts: 67
Liked 4 Times on 3 Posts


Maybe what you're brewing is just lower abv than what you're used to drinking. Are you measuring your gravities and calculating abv? Don't forget to adjust your hydrometer reading for temperature.

 
Reply With Quote
Old 04-05-2012, 01:03 AM   #4
Rhuarc
Recipes 
 
Aug 2010
Seattle, WA
Posts: 132

It could be many things. Like the previous poster said you need to check your OG and FG...

What are your fermentation temps? The yeast could be having problems converting the sugars at too high or low of a temp...
Are you using kits or created recipes yourself? It could be you don't have enough fermentable sugars if you are creating the recipes yourself.
Are the beers you are brewing designed to be session beers at a lower alcohol content in the 3.5% range, average at 5 to 6%, or higher at 9% or above?

Ultimately the only way you will know is to take detailed notes of your process and accurate hydrometer readings throughout the process.
__________________
Primary - SMaSH IPA (first AG)
Secondary -
Bottle Conditioning -
Bottled - Pumpkin Ale, Russian Imperial Stout, Coffee Porter, Scottish Ale, British Mild, Simple Hefe, Caribou Slobber

 
Reply With Quote
Old 04-05-2012, 01:04 AM   #5
SterlingHopper
Recipes 
 
Feb 2011
Knoxville, TN
Posts: 67
Liked 4 Times on 3 Posts


Also, I'm betting your extract beers aren't attenuating as well as commercial beer. To get the yeast to finish the last little bit of sugar, make sure you're pitching enough healthy yeast and aerating as best you can!

 
Reply With Quote
Old 04-05-2012, 01:12 AM   #6
MrSpiffy
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Feb 2012
Loveland, CO
Posts: 318
Liked 12 Times on 11 Posts


The only way to really determine ABV is to take hydrometer readings before and after fermentation. I'd suggest getting a hydrometer and a hydrometer tube for taking measurements to see if it's fully fermented before bottling. Maybe you have old yeast. But it could be that you're not letting it ferment long enough. (Does your beer typically taste kinda sweet?)

EDIT: Like Rhuarc mentioned, we'd need to know your ingredients to get a feel for where the brew should be to start with. Are you using kits? Designing your own recipes? Using someone else's recipes?

 
Reply With Quote
Old 04-05-2012, 01:27 AM   #7
landshark
HMFIC
HBT_SUPPORTER.png
 
landshark's Avatar
Recipes 
 
Mar 2011
Lone Jack, Missouri
Posts: 1,156
Liked 120 Times on 99 Posts


Lots of Variables at work here. As mentioned, test your S.G. Could be as you are brewing you are building a tolerance up to alcohol.

My last wheat beer turned out pretty low in the ABV, but to me, I don't mind as the beer is not about the alcohol level to me, its more of a taste, if it tastes like the best beer I've ever had, it can be 1.2% ABV for all I care.... Sorry, guess I don't care if I get get the buzz anymore. Probably why I never check S.G..... ever. Except wines and mead, but it's more for ****s and grins then.

 
Reply With Quote
Old 04-05-2012, 01:29 AM   #8
DrummerBoySeth
Recipes 
 
Mar 2012
Knightdale, NC
Posts: 674
Liked 40 Times on 38 Posts


Also, what types of beers have you been making? A cream ale or a mild pale ale could be well under 5% ABV. Some styles pack a bigger punch. Not knowing what you are making, or what the hydrometer readings were makes it hard to pinpoint the source of the low alcohol content.
__________________
"Give a man a beer, and he will waste an hour. Teach a man to brew, and he will waste a lifetime!" Bill Owen

 
Reply With Quote
Old 04-05-2012, 02:15 AM   #9
Jcap42
Recipes 
 
Jan 2011
Hammonton, NJ
Posts: 3

I was always told the priming sugar is the way to bring the alcohol percentage higher. Are you doing the formula before and after fermentation?

 
Reply With Quote
Old 04-05-2012, 02:14 PM   #10
txstars15
Recipes 
 
Aug 2011
Dallas, TX
Posts: 37

Wow! I didn't expect such a great response. Let me try to answer the questions:
1) All my kits have been ales, mostly from Midwest but a couple from Williams. Summer ale, Pumpkin, Holiday, Irish Red, etc. No home recipes at this point.
2) I always get the Wyeast smack packs with my kits. They are fresh and refrigerated until use. They always swell fully so I assume no yeast problems.
3) I take an OG and 2 or 3 SG to determine when my fermentation is done. Guess I didn't realize I could use an ABV calculator like SterlingHopper was kind enough to include in his post.
4) I do keep detailed brew day notes on each batch, including the final chilled temp of the wort. I don't get the temp of the fermented wort, however. Should I take that as well when I am doing an SG reading?

Thanks for all the input.



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
How can I get a higher alcohol content with coopers LME kits ? ohiochris Extract Brewing 2 03-17-2011 04:51 PM
I want to raise the alcohol content in a Scotch Ale Alehouserock Extract Brewing 8 12-28-2009 11:31 PM
increasing alcohol content a bit and help w/ bittering gator Extract Brewing 6 05-23-2008 05:31 PM
Raising alcohol content- MikeFlynn74 Extract Brewing 10 11-25-2007 03:54 PM
too late to boost alc content? kevy_kev Extract Brewing 5 06-12-2006 08:57 PM


Forum Jump