Tap Tower on TOP of keezer? - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > Tap Tower on TOP of keezer?
Cool Brewing Giveaway - Supporting Membership Drive & Discount

Reply
 
Thread Tools
Old 04-02-2012, 10:56 PM   #1
erockomania
Recipes 
 
Jun 2010
SF CA
Posts: 307
Liked 6 Times on 6 Posts



I just bought a chest freezer and I want to put my taps on this weekend. However, I am unsure why all the keezers I see have been converted to have a collar in which all the taps reside. Is there a reason I should not drill into the top?

I imagine it might be a support issue, but I could easily put a wood veneer on the top easier that a collar around the entire cooler. Thought?



 
Reply With Quote
Old 04-02-2012, 11:35 PM   #2
krazydave
Recipes 
 
Aug 2010
Santa Clarita, California
Posts: 918
Liked 32 Times on 30 Posts


It'll work...
One of the reasons is that cold air sinks, so it's easier to keep your lines cold when they're in the freezer as opposed to above it.

Another reason I can think of is that when you add weight to the top, it makes it a pain to work in there without the lid constantly wanting to close on your head.

It's certainly do-able though and plenty of people have done it.



 
Reply With Quote
Old 04-02-2012, 11:52 PM   #3
erockomania
Recipes 
 
Jun 2010
SF CA
Posts: 307
Liked 6 Times on 6 Posts


Ok, great. Thank you! Will a few inches make such a difference? Do you think I'll have foaming issues?

 
Reply With Quote
Old 04-02-2012, 11:57 PM   #4
krazydave
Recipes 
 
Aug 2010
Santa Clarita, California
Posts: 918
Liked 32 Times on 30 Posts


You might have a little bit of foam on the first pour, but other than that you should be ok. If it becomes a problem, you can easilly add a small fan to keep some of that cold air in your tower.

Then again though, I still get more foam on my first pour also and my kegerator is a standard fridge with the taps going through the door. I believe this happens regardless because my taps are still room temp and it takes a little bit before they chill down to the temp of the beer.

 
Reply With Quote
Old 04-03-2012, 12:01 AM   #5
corkybstewart
HBT_LIFETIMESUPPORTER.png
 
corkybstewart's Avatar
Recipes 
 
Jun 2011
Carlsbad, NM
Posts: 1,211
Liked 190 Times on 134 Posts


To open the keezer you have to pull it away from the wall and that can be a major PITA. I had casters on mine but it was so heavy when full it was still tough to move it.
I fixed the cooling issue by putting 3" PVC pipes in and out and attaching a computer fan to blow cold air through the tower.
After a year I took the tower off and built a nice collar.

 
Reply With Quote
Old 04-03-2012, 12:03 AM   #6
jbaysurfer
Former future HOF Brewer
HBT_LIFETIMESUPPORTER.png
Recipes 
 
Nov 2011
Santa Barbara, CA
Posts: 2,921
Liked 590 Times on 429 Posts


I've found, after being a kegerator owner and builder for 15+ years, that reigning in your expectations of foam is the best way to fix foamy beer. Basically, you can build a cheap tower cooler, or buy one off ebay and that will help tremendously, and lengthening your lines for decreased pressure at the tap are your only two options that will work for certain. Both are quite easy. A length of 1" copper pipe holds my beer lines, extends a few inches into the fridge/freezer section, where a copper T connects to the OUT of my tower cooler, and the other is open and the beer lines flow into it. The copper gets very cold, and holds the beer in the tower at lower temps.

Anway, I'm rambling, but I've spent far too many hours of my life working on my kegerator.

The biggest risk to putting a tower on a chest freezer (other then the risk of the lid falling on your head when you're working in it) is that you'll forget to pull the keezer-ator away from the wall before you lift your lid and your tower will damage the wall, or the wall will damage your tower, or both. Being mindful is key. Casters would help too fwiw, because then pulling it away from the wall would be pretty easy.
__________________
Batch counter: 123 batches (11/29/11-7/22/15).

 
Reply With Quote
Old 04-03-2012, 12:15 AM   #7
Monster Mash
Recipes 
 
Apr 2006
Castaic, CA
Posts: 1,323
Liked 91 Times on 70 Posts


The biggest issue is opening the lid, if you have a place to put it without a wall behind it you won't have a problem.

The first time you open it and all of your tap handles hit the wall, open and beer pours out you will not be a happy brewer...
__________________
My 1BBL Brewery Pics

 
Reply With Quote
Old 04-03-2012, 01:12 AM   #8
A4J
HBT_LIFETIMESUPPORTER.png
 
A4J's Avatar
Recipes 
 
Mar 2008
the Desert, CA
Posts: 1,335
Liked 30 Times on 25 Posts


As others have said, the biggest issue is opening a lid. I've never had a problem with foaming but I've always used longer beer lines. The first version of my keezer was on casters, but as corkybstewart said, it got too heavy to move when it was full, especially on a carpeted floor. My solution to that is putting the entire keezer in a built-in cabinet and using heavy duty drawer glides (see link in my sig). Using a collar was never an option for me.
__________________
Primary 1: pale ale
Primary 2: blondie


My mid-century modern keezer build thread.

 
Reply With Quote
Old 04-03-2012, 01:17 AM   #9
tdbc2011
Recipes 
 
Sep 2011
Brookhaven, Mississippi
Posts: 258
Liked 28 Times on 22 Posts


I have a five tap freezer. I made a tower for the taps with plywood and put some thin roll insulation inside the tower. The tower is 30 x 8 and 14 in high. I cut a 6 x 24 inch hole in the lid and the plywood top. The lines stay cool but not cold. I have not had a foaming problem.
My freezer is far enough from the wall so it does not hit.
The top is heavy. It has 5/8 in plywood on top and 1/2 under as we'll as trim and tile.

 
Reply With Quote
Old 04-03-2012, 04:45 PM   #10
erockomania
Recipes 
 
Jun 2010
SF CA
Posts: 307
Liked 6 Times on 6 Posts


Awesome info. Thanks guys.

I'd love see a pic of the copper tubing so I can envision how you attached it to the tower sounds like a great idea to me.


__________________
---------
regularly brewed ales:
Hopostle single IPA
Hopostle double IPA
Brooklynn Brew Saison (every summer)

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Keezer with Tower mounted on top, ? agentEhrman Kegerators & Keezers 12 03-19-2012 09:57 PM
Keezer with Detachable Tap tower wfowlks Kegerators & Keezers 10 03-13-2012 12:02 AM
I want to build a Keezer with a tap tower Tat2nBrew Kegerators & Keezers 11 10-28-2011 12:25 AM
Keezer Collar v. Tower Sky7 Kegerators & Keezers 16 07-09-2011 01:43 AM
Keezer…with tower taps? LandoCalrissian Kegerators & Keezers 9 08-07-2009 06:55 AM


Forum Jump