Regulator Problem ?? - Home Brew Forums
Register Now For Free!

Home Brew Forums > Home Brewing Beer > Bottling/Kegging > Regulator Problem ??

Reply
 
Thread Tools
Old 04-01-2012, 01:19 PM   #1
sasabs
Recipes 
 
Mar 2011
Ridgewood, nj
Posts: 44


I just received my first kegerator setup. Carbonated as recommended; 12 pounds for two weeks. Boy, what an improvement over bottle conditioning.

Attached second keg, purged, then set to 12 pounds. Checked a short time later the pressure gauge read 30 pounds. I released the pressure on the regulator, turned the screw down to 12, again it went to 30 after some hours. and again.
The corny was used but came pressurized. The funny thing to me is that every time I brought it down I had to turn the screw again to reduce the pressure. If I just relieved the pressure on the regulator it would jump back to 30./

Any ideas ?
__________________
[SIZE="1"]Give a man a beer he'll waste an hour. Teach a man to brew he'll waste a lifetime

 
Reply With Quote
Old 04-04-2012, 08:57 PM   #2
jaysbrewing
Recipes 
 
Apr 2012
Manassas, VA
Posts: 62

Where is the regulator in the fridge or room temp? If it is cold it doesn't always work the same.
__________________
Brewing With A Zen Approach

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
C02 Regulator Problem jmelms Bottling/Kegging 3 07-08-2012 01:54 AM
Regulator problem? Chumdog Bottling/Kegging 1 03-26-2012 02:03 AM
Regulator Problem? ktillman1 Bottling/Kegging 1 03-24-2012 08:36 AM
c02 regulator problem jmelms Bottling/Kegging 1 03-05-2012 12:46 PM
Another Regulator Problem Elshupacabra Bottling/Kegging 1 10-30-2011 11:56 AM


Forum Jump