Insulating Beer Tower - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators & Keezers > Insulating Beer Tower

Reply
 
Thread Tools
Old 03-27-2012, 06:07 PM   #1
msmith92
Recipes 
 
Jan 2012
dayton, ohio
Posts: 272
Liked 2 Times on 2 Posts



I put a draft tower on my Frigidaire mini and I made a hole that was just big enough to fit the beer line through.

I've seen people making bigger holes to fit copper pipes through and then insulating the tower with foam pieces.

Since I created a small opening should I still add foam to the interior of the tower?

Also, would regular home insulation be good enough to add? I have some sections of pink insulation that would be easy to shove in there.



 
Reply With Quote
Old 03-27-2012, 09:46 PM   #2
JoshuaW
HBT_SUPPORTER.png
Recipes 
 
Dec 2011
South Bend, Indiana
Posts: 617
Liked 110 Times on 62 Posts


I intend on using pipe insulation. You should also consider a fan to draw the cold air up through the tower.



 
Reply With Quote
Old 03-27-2012, 10:08 PM   #3
msmith92
Recipes 
 
Jan 2012
dayton, ohio
Posts: 272
Liked 2 Times on 2 Posts


Yes, but are you going to stuff foam into the draft tower?

It seems like people do this.

If so, what is the point of the fan?

Isnt the foam blocking air flow?

 
Reply With Quote
Old 03-28-2012, 12:59 AM   #4
day_trippr
Recipes 
 
May 2011
Stow, MA
Posts: 16,855
Liked 2830 Times on 2120 Posts


Typically you insulate along the inside wall of the tower, leaving enough room to either run copper sleeves up from the kegerator/keezer to conduct heat back to where it can be chilled, or run a 1" ID hose up from a small fan to push cold air into the tower then return along whatever gaps exist between all the plumbing.

If you just pack the tower column with insulation, that will slow down the warming, but won't prevent the beer lines from eventually reaching the ambient temperature of the room...

Cheers!

 
Reply With Quote
Old 03-28-2012, 02:24 PM   #5
Cpt_Kirks
Recipes 
 
Sep 2008
Lakeland TN
Posts: 3,723
Liked 47 Times on 41 Posts


I lined my tower with a thin layer of flexible foam, and ran a hose to the top. The hose is connected to a fan in the bottom of the kegerator.

If I don't let the fan run for a little while before I pour, I get more foam in the first glass.

With the fan on, the tower is cool to the touch, but the taps are COLD.

The insulation definitely helps.


 
Reply With Quote
Old 03-28-2012, 06:52 PM   #6
JoshuaW
HBT_SUPPORTER.png
Recipes 
 
Dec 2011
South Bend, Indiana
Posts: 617
Liked 110 Times on 62 Posts


Quote:
Originally Posted by msmith92 View Post
Yes, but are you going to stuff foam into the draft tower?

It seems like people do this.

If so, what is the point of the fan?

Isnt the foam blocking air flow?
I have a full three inch hole that goes into my three inch tower. I am going to insulate the outer portion (there is already a thin foam around my tower, but there is probably an inch open around the three lines) then run a fan to force the extra air. If I am not getting the airflow that I need (dont think it will be an issue) I will just run some copper through there and hope that carries the cold enough.



 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Insulating Keggles Willie3 Kettles, Mash Tuns & Hot Liquor Tanks 55 11-27-2012 07:32 PM
Insulating plastic tote summerofgeorge Kettles, Mash Tuns & Hot Liquor Tanks 6 06-12-2012 09:46 PM
Insulating with wood horseinmay Kettles, Mash Tuns & Hot Liquor Tanks 4 09-16-2011 11:11 PM
Insulating beer chiller line jcojr72 Kegerators & Keezers 12 04-01-2010 01:06 AM
Insulating a corny jas0420 Kegerators & Keezers 16 07-17-2009 04:13 AM


Forum Jump