Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Brew Stands > distance from banjo to wind screen
Reply
 
Thread Tools
Old 03-19-2012, 05:56 PM   #1
bucfanmike
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
bucfanmike's Avatar
Recipes 
 
Join Date: Apr 2010
Location: Duluth
Posts: 1,028
Liked 26 Times on 23 Posts
Likes Given: 4

Default distance from banjo to wind screen

Cutting my stainless today for wind screens for the bg 14s. Ive looked at many ways they have been mounted and cant find for sure if there is a consensus on distance between the burner and screen. Has anyone not been happy by just mounting the screen tight to the mounting points on the burner? Is there an advantage to spacing them about another inch away?

I use keggles btw if it makes a difference, oh and these will be run on low pressure.


__________________
Mike in Duluth

Currently on Tap
1. Hefeweizen
2. BM Centennial Blonde
3. LHMS Clone

Pipeline
Next on Tap-Denny Conn Rye IPA
Kegged and aging Ed Worts Apfelwine, Denny Conn BVIP
Fermenters -
bucfanmike is offline
 
Reply With Quote
Old 03-19-2012, 07:19 PM   #2
JuanMoore
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
JuanMoore's Avatar
Recipes 
 
Join Date: Oct 2009
Location: The Old Pueblo
Posts: 18,491
Liked 3372 Times on 3254 Posts
Likes Given: 20

Default

Quote:
Originally Posted by bucfanmike View Post
Cutting my stainless today for wind screens for the bg 14s. Ive looked at many ways they have been mounted and cant find for sure if there is a consensus on distance between the burner and screen. Has anyone not been happy by just mounting the screen tight to the mounting points on the burner? Is there an advantage to spacing them about another inch away?

I use keggles btw if it makes a difference, oh and these will be run on low pressure.
I would think you'd want at least a little space around the burner to draw air in.


__________________
Keezer Soze

Yuri rubs it out with 60 grit... wouldn't even feel a tenga egg. -Randar

, place entry ox dixla to suck. Fcxk fwnpoo and passed. Hel an my spupid ass. OK. - TXCrash
JuanMoore is online now
 
Reply With Quote
Old 03-19-2012, 08:15 PM   #3
jfrizzell
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2007
Location: Iowa
Posts: 691
Liked 11 Times on 10 Posts
Likes Given: 4

Default

I would think the pie shape areas inside the burner would be plenty to allow the burner to draw air in.



Blickmann Engineering would seem to agree. Their burner is the one on the right below.



Quote:
Originally Posted by JuanMoore View Post
I would think you'd want at least a little space around the burner to draw air in.
__________________
Primary: Pliney the Elder Clone
Kegged: Tank 7 / Saison Brett

http://untappd.com/abbayeduchatnoir
jfrizzell is offline
 
Reply With Quote
Old 03-19-2012, 08:18 PM   #4
jfrizzell
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jun 2007
Location: Iowa
Posts: 691
Liked 11 Times on 10 Posts
Likes Given: 4

Default

Quote:
Originally Posted by bucfanmike View Post
Cutting my stainless today for wind screens for the bg 14s. Ive looked at many ways they have been mounted and cant find for sure if there is a consensus on distance between the burner and screen. Has anyone not been happy by just mounting the screen tight to the mounting points on the burner? Is there an advantage to spacing them about another inch away?

I use keggles btw if it makes a difference, oh and these will be run on low pressure.
I think the more important thing is making sure you have a place for the exhaust gas to go. You'll need to stand your pot/keggle above the windscreen a bit so there is a place for exhaust gases to escape. Some have also cut vent holes in the lower rim of their keggles.

__________________
Primary: Pliney the Elder Clone
Kegged: Tank 7 / Saison Brett

http://untappd.com/abbayeduchatnoir
jfrizzell is offline
 
Reply With Quote
Old 03-19-2012, 08:23 PM   #5
bucfanmike
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
bucfanmike's Avatar
Recipes 
 
Join Date: Apr 2010
Location: Duluth
Posts: 1,028
Liked 26 Times on 23 Posts
Likes Given: 4

Default

jfrizzell, good point on the blichmanns, i guess they do know their stuff. Also I plan on having my screen stop about an inch below the deck, should allow room for exhaust gases. Thanks for the replies!


__________________
Mike in Duluth

Currently on Tap
1. Hefeweizen
2. BM Centennial Blonde
3. LHMS Clone

Pipeline
Next on Tap-Denny Conn Rye IPA
Kegged and aging Ed Worts Apfelwine, Denny Conn BVIP
Fermenters -
bucfanmike is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Burner to kettle distance Countrybrewin Brew Stands 14 01-13-2011 06:21 PM
Distance to Pump ascha Brew Stands 8 12-20-2010 06:16 PM
Lateral distance between Kettles FenoMeno Brew Stands 2 04-28-2010 11:17 AM
Show me your wind shield/screen TerapinChef Brew Stands 8 03-23-2009 01:19 AM
wind screen for propane cooker kappclark Brew Stands 11 11-14-2008 01:49 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS