Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators and Keezers > The 'Keezer' Project
Reply
 
Thread Tools
Old 05-07-2013, 02:05 AM   #441
DigitalDray
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2011
Location: Frisco, TX
Posts: 1
Default Freezer lid

I have recently found this thread; and have been able to follow all aspects of the build with one exception. I didn't see a picture on how the hoses were fed from the coffin back into the freezer. I assume a hole was cut through the lid. Does anyone have hints, notes, anything on making this cut?


DigitalDray is offline
 
Reply With Quote
Old 05-07-2013, 05:27 AM   #442
Turisops
Feedback Score: 0 reviews
Recipes 
 
Join Date: Mar 2010
Location: Yelm, WA
Posts: 12
Default

Quote:
Originally Posted by DigitalDray
I have recently found this thread; and have been able to follow all aspects of the build with one exception. I didn't see a picture on how the hoses were fed from the coffin back into the freezer. I assume a hole was cut through the lid. Does anyone have hints, notes, anything on making this cut?
Yep all I did was use a hole saw that attaches to a drill. It did just fine going through the 1 in plywood top and then the sheet metal of the freezer top and finally through the foam and plastic liner. It was the last thing I did before mounting the coffin to the lid. If your hole saw isn't deep enough take a drill bit and drill all the way through at the center where you want your hole then take your hole saw and do half the hole as deep as you can then do the same from the other side using that small drill hole you did earlier as a guide for the bit in the center of the hole saw. Good luck.


Turisops is offline
 
Reply With Quote
Old 05-07-2013, 01:32 PM   #443
Jester369
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Jester369's Avatar
Recipes 
 
Join Date: Jan 2007
Location: Vermont
Posts: 1,969
Liked 151 Times on 110 Posts
Likes Given: 3

Default

I know there is a description and photos of the holes in the thread somewhere. Sorry I can't direct you right to it. I used a Dremel with a cutoff wheel to cut a square opening, then just protected the edges with duct tape.
__________________
The 'Original' Keezer!
Jester369 is offline
 
Reply With Quote
Old 06-27-2013, 05:11 AM   #444
danielofthedale
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2011
Location: Monticello, Georgia
Posts: 294
Liked 24 Times on 20 Posts
Likes Given: 52

Default

I looked through the thread but I could not see what the cubic footage of the freezer was. What size was it?
danielofthedale is offline
 
Reply With Quote
Old 06-27-2013, 10:28 PM   #445
Jester369
HBT_LIFETIMESUPPORTER.png
Feedback Score: 0 reviews
 
Jester369's Avatar
Recipes 
 
Join Date: Jan 2007
Location: Vermont
Posts: 1,969
Liked 151 Times on 110 Posts
Likes Given: 3

Default

Quote:
Originally Posted by danielofthedale
I looked through the thread but I could not see what the cubic footage of the freezer was. What size was it?
Seems to me it was around 13cf
__________________
The 'Original' Keezer!
Jester369 is offline
mmmooretx Likes This 
Reply With Quote
Old 11-17-2013, 07:52 PM   #446
m3n00b
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2013
Location: Orange County, Commiefornia
Posts: 1,134
Liked 152 Times on 115 Posts
Likes Given: 70

Default

So without going through every page....did this thing ever get finished? I'm about to build mine.
m3n00b is offline
 
Reply With Quote
Old 11-18-2013, 03:47 PM   #447
Im_Lars
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
Im_Lars's Avatar
Recipes 
 
Join Date: Oct 2010
Location: Sunny Puget Sound
Posts: 206
Liked 21 Times on 16 Posts
Likes Given: 9

Default

Quote:
Originally Posted by m3n00b View Post
So without going through every page....did this thing ever get finished? I'm about to build mine.
Here is a picture of it finished

http://www.homebrewtalk.com/gallery/...rSortaDone.jpg
Im_Lars is offline
 
Reply With Quote
Old 11-18-2013, 04:24 PM   #448
m3n00b
Feedback Score: 0 reviews
Recipes 
 
Join Date: Apr 2013
Location: Orange County, Commiefornia
Posts: 1,134
Liked 152 Times on 115 Posts
Likes Given: 70

Default

Quote:
Originally Posted by Im_Lars View Post
Oh that's the one! Ok...going to build this.
m3n00b is offline
 
Reply With Quote
Old 02-21-2014, 04:38 PM   #449
mmmooretx
HopHead
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2009
Location: Houston, TEXAS
Posts: 119
Likes Given: 35

Default Hope to update by end of summer

I have a 25 CF freezer as a standard keezer, but want to update to this style coffin keezer. Does anyone have plans for this size?
I have already printed most of Jester369's items, but have not found the Google Sketchup plans for it.
Thanks, but my wallet hates it...
Mike
__________________
_________________
Michael M. Moore
N5RWH
Hophead
mmmooretx is offline
 
Reply With Quote
Old 05-08-2014, 01:57 AM   #450
antvq
HBT_SUPPORTER.png
Feedback Score: 0 reviews
Recipes 
 
Join Date: Oct 2011
Location: Horsham, PA
Posts: 11
Likes Given: 2

Default

I've noticed that Jester has not been around in quite a while, so I'll post here and ask if anyone has the Google Sketchup plans he was sending out? I'd really like to attempt to do a build like this and would really appreciate the plans.


antvq is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Keezer project coming along!! Arneba28 Kegerators and Keezers 26 01-26-2013 06:22 PM
Keezer Project elmetal Kegerators and Keezers 3 12-20-2010 12:55 PM
Keezer Project v1.0 a W.I.P. TerryWendel Kegerators and Keezers 5 12-14-2008 09:23 PM
My keezer project Mustangfreak Kegerators and Keezers 12 12-14-2008 09:43 AM
My Ultimate 8 Tap Keezer Project EricS Kegerators and Keezers 9 08-26-2008 03:10 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS