Question on Keezer Collar - Home Brew Forums
Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators and Keezers > Question on Keezer Collar
Cool Brewing Corny 5G & Mini Giveaway

Reply
 
Thread Tools
Old 03-09-2012, 02:57 AM   #1
nitsuj80
Recipes 
 
Join Date: Feb 2011
Location: Wilbur, WA
Posts: 67

I am almost done with my keezer collar and was wondering one thing. Do you guys stain/clear coat the whole collar and if so have you found it hard to glue foam insulation board to it once it is clear coated? If not what sort of adhesive have you found to work the best for the foam insulation? Thanks.



 
Reply With Quote
Old 03-09-2012, 03:00 AM   #2
WAORGANY
HBT_LIFETIMESUPPORTER.png
 
WAORGANY's Avatar
Recipes 
 
Join Date: Apr 2010
Location: Northern NY, NY
Posts: 476
Liked 14 Times on 12 Posts
Likes Given: 38


Quote:
Originally Posted by nitsuj80
I am almost done with my keezer collar and was wondering one thing. Do you guys stain/clear coat the whole collar and if so have you found it hard to glue foam insulation board to it once it is clear coated? If not what sort of adhesive have you found to work the best for the foam insulation? Thanks.
I stained and poly both inside and out but did not add any insulation, would have gone back and done so if needed, but holds temps great year round with very limited run times. Wish you luck. I did use liquid nails for the top to reattach the plastic cover


__________________
RLTW!

 
Reply With Quote
Old 03-09-2012, 03:07 AM   #3
Toymaker
Arrgh!
HBT_SUPPORTER.png
 
Toymaker's Avatar
Recipes 
 
Join Date: Feb 2012
Location: Livonia, Michigan
Posts: 154
Liked 25 Times on 16 Posts
Likes Given: 7


I did not insulate mine either. If you want to add some use silicone caulk it will stick good and not harm the foam. You may have to tape it on for a couple of days till it dries.
__________________
Cheers,
Gary

 
Reply With Quote
Old 03-09-2012, 03:08 AM   #4
bad coffee
HBT_LIFETIMESUPPORTER.png
 
bad coffee's Avatar
Recipes 
 
Join Date: Jun 2008
Location: NYC
Posts: 5,062
Liked 474 Times on 463 Posts
Likes Given: 48


The best adhesive for foam is Spray 74 foamfast. Spray 77 also works for foam, sometimes. Water-based contact cement should work too.

B
__________________
Quote:
Originally Posted by GilaMinumBeer
Why do you think they choose that path? (.)(.) = $$$$$$$$$
Quote:
Originally Posted by Zuljin View Post
Wtf was chasing you for an hour? Buy a gun already.
Quote:
Originally Posted by AZ_IPA View Post
I'm a meat hunter. PKU.

 
Reply With Quote
Old 03-09-2012, 03:11 AM   #5
nitsuj80
Recipes 
 
Join Date: Feb 2011
Location: Wilbur, WA
Posts: 67

Thanks for the responses.

 
Reply With Quote
Old 03-09-2012, 04:40 AM   #6
greenbirds
Recipes 
 
Join Date: May 2008
Posts: 445
Liked 10 Times on 10 Posts
Likes Given: 1


No adhesive here. Used double sided mounting tape by Scotch. Is kind of spongy, about 1/16" thick, with a red backing. Holds firm, but is removable if you need to make any modifications. Oh, and the interior of my collar was coated with polyurethane, and it still sticks great.



 
Reply With Quote
Reply

Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Keezer collar question swanwick Kegerators and Keezers 6 05-05-2011 02:12 PM
Keezer collar question jkeb74 Kegerators and Keezers 7 01-10-2011 03:47 PM
Keezer Collar Question? goose1873 Kegerators and Keezers 7 08-01-2010 10:18 PM
Quick Keezer/Collar Question jmkratt Kegerators and Keezers 12 01-26-2010 04:15 PM
Keezer Collar Question BrothersTrout Kegerators and Keezers 11 07-26-2008 02:49 PM


Forum Jump