Coldbreak Brewing HERMS Giveaway!

HomeBrewSupply AMCYL Brew Kettle Giveaway!


Home Brew Forums > Home Brewing Beer > DIY Projects > Kegerators and Keezers > thoughts on keg cooler
Reply
 
Thread Tools
Old 03-08-2012, 09:18 PM   #1
spokaniac
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: spokane, WA
Posts: 274
Liked 4 Times on 3 Posts
Likes Given: 1

Default thoughts on keg cooler

I was looking in my basement for a place to set up the kegs I will be getting soon and had a thought. I have a water softener that we are not using. What if I was to build an insulated box large enough to hold the kegs and run 100' or so of PEX around the inside of the box connected to the fittings where the water softener is now. Every time we use any water in the house it would flow through the PEX and the temp inside the box should stay fairly cool since our tap water temp here is usually < 50 degrees. Almost free refrigeration?

Does this seem like it would work? Anyone else done something similar?


__________________
Primary: MT
Secondary: MT
Bottled and disappearing: Pale Ale/BM clone/Dbl Choc stout
Kegged: BM clone/double chocolate stout
On Deck: Hefe
spokaniac is offline
 
Reply With Quote
Old 03-08-2012, 09:33 PM   #2
horseinmay
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Lakewood, California
Posts: 223
Liked 12 Times on 10 Posts
Likes Given: 20

Default

I congratulate you on a good idea. I think it would work, but it would affect all of the water in your house. I'm not sure how much the flow would be diminished after having to flow through 100' of hose. You will lose a bit of pressure, but if your water is that cold, I say go for it.


horseinmay is offline
 
Reply With Quote
Old 03-08-2012, 09:40 PM   #3
spokaniac
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: spokane, WA
Posts: 274
Liked 4 Times on 3 Posts
Likes Given: 1

Default

Might be able to get by with 50' or maybe step the size up from 3/4 to 1" for the "cooler coil" to reduce the pressure drop.

would be about 5.5 psi drop for 100' of 3/4" or 1.7 psi for 1"
__________________
Primary: MT
Secondary: MT
Bottled and disappearing: Pale Ale/BM clone/Dbl Choc stout
Kegged: BM clone/double chocolate stout
On Deck: Hefe
spokaniac is offline
 
Reply With Quote
Old 03-08-2012, 11:58 PM   #4
horseinmay
Feedback Score: 0 reviews
Recipes 
 
Join Date: May 2011
Location: Lakewood, California
Posts: 223
Liked 12 Times on 10 Posts
Likes Given: 20

Default

If the water pressure in your house is generally really good, than that much of a pressure drop won't hurt. Especially if you go with the 1". I work for a water company and our systems generally run about 60psi.
horseinmay is offline
 
Reply With Quote
Old 03-09-2012, 12:10 AM   #5
spokaniac
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Location: spokane, WA
Posts: 274
Liked 4 Times on 3 Posts
Likes Given: 1

Default

May have to try it out. A 100' roll of 3/4 is only $41. Thinking out loud here.........If I cut it in half and paralleled 2 50' lengths it should give less head loss and more surface area for heat transfer.....


__________________
Primary: MT
Secondary: MT
Bottled and disappearing: Pale Ale/BM clone/Dbl Choc stout
Kegged: BM clone/double chocolate stout
On Deck: Hefe
spokaniac is offline
 
Reply With Quote
Reply


Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
Water cooler as a fermenter cooler question BrewBeemer Fermenters 4 02-22-2012 08:55 PM
brewery thoughts techrunner Brew Stands 2 02-17-2011 04:23 PM
Does any one use a Beverage Cooler for a Fermentation Cooler zman Fermenters 23 02-17-2011 06:19 AM
Cooler MLT: leaking inside cooler walls edasaurus Kettles, Mash Tuns, & Hot Liquor Tanks 3 02-04-2011 08:25 AM
Electric Keg HLT... Thoughts?.... Duckfoot Kettles, Mash Tuns, & Hot Liquor Tanks 13 03-23-2009 12:23 AM


Forum Jump

Newest Threads

LATEST SPONSOR DEALS