anyone have any extra high temp gaskets and SS washers??

im looking to do an e-herms system like kals. and all of the high temp o ring gaskets you have to buy in a pack of 10, and some of the SS washers as well..
does anyone have any extra they would like to sell me?
Id rather not buy a pack of 10 if i only need 2 or so each

i need



(Qty: 3) Silicone high temperature o-ring (13/16" ID, 1-1/16" OD, 1/8" thick) (McMaster-Carr part number: 9396K32)
(Qty: 3) Stainless steel washer/shim (1-1/8" ID, 1-5/8" OD, 1/16" thick) (McMaster-Carr part number: 98126A754)
(Qty: 3) Stainless steel washer/shim (7/8" ID, 1-3/8" OD, 1/16" thick) (McMaster-Carr part number: 98126A748)
(Qty: 1) Stainless steel bushing (reducer) 1/2" MPT x 1/4" FPT (McMaster-Carr part number: 4464K265)
(Qty: 2) Silicone high temperature o-ring (McMaster-Carr part number: 9396K38)
(1-3/16" ID x 1-7/16" OD x 1/8" width, AS568A Dash No. 217, Durometer hardness A70, FDA compliant, -65F to +450F)
(Qty: 2) Stainless steel washer/shim (McMaster-Carr part number: 96853a253)
(0.075" thick, 1-1/2" ID, 2-1/4" OD)
(Qty: 2) Stainless steel locknut 1" NPS (McMaster-Carr part number: 4464K586

let me know what you have and what you want for them

thanks!

Get extra orings. Some will break, might lose some. Might get dirty.

For what it's worth you could buy a sheet of silicone and with an exacto knife cut them out.
Also check out Bargain Fittings, they sell individual o-rings and washers for a decent price.