Would this SSR work for both legs of a 240v element - Home Brew Forums
Home Brew Forums > Home Brewing Beer > Electric Brewing > Would this SSR work for both legs of a 240v element

Reply
 
Thread Tools
Old 03-06-2012, 10:34 PM   #1
NinjaJoe
Recipes 
 
Jan 2010
Columbia
Posts: 132



http://cgi.ebay.com/ws/eBayISAPI.dll...m=200627240200

Thoughts?



 
Reply With Quote
Old 03-06-2012, 10:40 PM   #2
ajm163
Recipes 
 
Jan 2012
Denver, CO
Posts: 187
Liked 6 Times on 4 Posts


that should work for both legs. they are controlled independently through the small pins... not a screaming deal though new ones (although without the heatsink) can be had for around $60



 
Reply With Quote
Old 03-06-2012, 10:42 PM   #3
NinjaJoe
Recipes 
 
Jan 2010
Columbia
Posts: 132


Thanks! I offered $20 each for 2 (One for my HLT and one for my BK) and they accepted! $54 and changed for two shipped!!

Thanks again!

 
Reply With Quote
Old 03-06-2012, 10:46 PM   #4
ajm163
Recipes 
 
Jan 2012
Denver, CO
Posts: 187
Liked 6 Times on 4 Posts


I have used these with great success before

http://www.mouser.com/ProductDetail/...AikaPjDLHjY%3d

 
Reply With Quote
Reply
Thread Tools


Similar Threads
Thread Thread Starter Forum Replies Last Post
looking for low density screw-on 240V, 1500W electric water heater element loserbrewer Electric Brewing 3 04-24-2015 06:42 PM
Switch for running element at 120v OR 240V? thelorax121 Electric Brewing 14 05-10-2011 11:37 PM
Question about the Camco Mfg 5500W 240V Ripp Element 2963 GRHunter Electric Brewing 5 04-03-2011 11:49 PM
Type of wire for 5500w 240v element thomashp Electric Brewing 14 03-04-2011 11:35 PM
Strange issue with 240v legs. 120v on both, no 240v Brewmoor Electric Brewing 5 12-03-2010 07:15 PM


Forum Jump