Coldbreak Brewing Giveaway - Open to All!

Home Brew Forums > Wine, Mead, Cider, Sake & Soda > Mead Forum > Question bout screwtop glass gallons???
Reply
 
Thread Tools
Old 03-05-2012, 11:55 PM   #1
mikebux
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Posts: 29
Default Question bout screwtop glass gallons???

Can the 1 gal glass screwtop wine bottles be used for aging by filling w final product mead, that is done fermenting for at least a month, no bubbles in mead what so ever, and just rescrewing the top on... This mead is my first batch an will surely be consumed pretty quickly.... But is it ok to store or a bit this way?.? Thanks


mikebux is offline
 
Reply With Quote
Old 03-06-2012, 01:46 AM   #2
OpenContainer
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2011
Location: Jefferson City, MO
Posts: 341
Liked 21 Times on 20 Posts
Likes Given: 7

Default

If you're going to use the original screw cap instead of an air lock, then I'd say you need to top op as much as possible to avoid any and all possible air exchange.


OpenContainer is offline
 
Reply With Quote
Old 03-06-2012, 02:04 AM   #3
TheBrewingMedic
HBT_SUPPORTER.png
Feedback Score: 0 reviews
 
TheBrewingMedic's Avatar
Recipes 
 
Join Date: Dec 2011
Location: Stanfordville, NY
Posts: 650
Liked 27 Times on 27 Posts
Likes Given: 5

Default

I use the gallon wine jugs too for aging even fermenting small batches, I've noticed when I screw the caps to shake or swirl when mixing/aerating a little bit leaks out , so I don't think those caps will work to well to be air tight. I actually keep an airlock on them even while aging. Could get some non-drilled #6 rubber stoppers for about 50 cents each and if budget or availablity doesnt allow for that maybe screw the cap on and either wax seal it or (yeah I'm born and raised redneck) wrap it tightly with electrical tape?
TheBrewingMedic is offline
 
Reply With Quote
Old 03-06-2012, 03:50 AM   #4
mikebux
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Posts: 29
Default

I like that electric tape technique , that's straight up redneck engineering ... And will work just fine I am sure... Good idea...
mikebux is offline
 
Reply With Quote
Old 03-06-2012, 02:17 PM   #5
fatbloke
Feedback Score: 0 reviews
Recipes 
 
Join Date: Dec 2006
Location: UK - South Coast.
Posts: 2,696
Liked 182 Times on 167 Posts
Likes Given: 30

Default

I use glass half gallon jugs that are designed for screw tops. The jugs and caps are ancient (30 years plus). They all cleaned up fine, but all the original seals are knackered. So I found some plastic foam sheet used for wrapping parcels, that I cut circular seals from. I can't certify air or liquid tight, but have yet to have one leak when inverted......

As for making a tape seal, I wouldn't use electricians tape, as its got all that glue on it, which, in theory at least, could contaminate the brew. Try plumbers PTFE tape wound round the threaded part of the jug. It's safe for use with water and doesn't have any glue.........
__________________
"What the large print giveth, the small print taketh away". Tom Waits.

Oh, and here's some blog stuff!
fatbloke is offline
 
Reply With Quote
Old 03-06-2012, 07:41 PM   #6
mikebux
Feedback Score: 0 reviews
Recipes 
 
Join Date: Jan 2012
Posts: 29
Default

Makes sense. Prob gonna pick up some un drilled stoppers . but what you did sounds good too.. Will try that out also... A friends father sucks down a gallon a week or so of wine in those gal glass jugs so it's a real convienance to get those jugs from him.....Thanks


mikebux is offline
 
Reply With Quote
Reply


Thread Tools



Forum Jump

Newest Threads

LATEST SPONSOR DEALS